MIUI 12.5 21.1.20/21

[tan77]

I flashed this rom on my mi 9 lite,so far i notice a little slow on reboot.I was clean install it.No magisk.

 

[hpmp109]

Hi all, I was on the MIUI 12 stable version before and tried to install from the updater app... I’m now in a softbrick stuck on Fastboot mode and cant seem to boot to TWRP... I keep getting “FAILED (remote: Failed to load/authenticate boot image: Load Error)“ - I have tried so many things! Please please help!

 

[Poney70]

Hi all, I was on the MIUI 12 stable version before and tried to install from the updater app... I’m now in a softbrick stuck on Fastboot mode and cant seem to boot to TWRP... I keep getting “FAILED (remote: Failed to load/authenticate boot image: Load Error)“ - I have tried so many things! Please please help!

Hello, you didn't do some searching before attempting to flash a Weekly ROM version fom Stable ROM one:

No "Format Data" in TWRP = Get in trouble!

For your fastboot issue, are you using USB 3.0 port? You must use USB 2.0 port.

 

[jh0bc93]

I never touched my persist, nor flashed any non miui rom.
But i dont know why my L1 is lost. Even in this release its L3.

Same problem with me bro.

Flashed this update and my Widevine L1 completely gone.... Very sad...

I already reflashed global stock but still L3...

And on 21.1.14 I have L1 perfectly...

 

[hpmp109]

Hello, you didn't do some searching before attempting to flash a Weekly ROM version fom Stable ROM one:

No "Format Data" in TWRP = Get in trouble!

For your fastboot issue, are you using USB 3.0 port? You must use USB 2.0 port.

Hi Poney! Thanks for getting back to me. I am using the same USB port that I used when flashing stable ROM. How can I fix this? I have tried most variations of TWRP for Mi 10 (umi) - still stuck on fastboot!

 

[hpmp109]

Hello, you didn't do some searching before attempting to flash a Weekly ROM version fom Stable ROM one:

No "Format Data" in TWRP = Get in trouble!

For your fastboot issue, are you using USB 3.0 port? You must use USB 2.0 port.

So I just checked. and it’s a USB 3.0! I only have 1 USB port too! Any suggestions?

 

[carlofarina]

I have Tucana and I am using the latest version. I found a bug. When the alarm is activated, I cannot turn it off until I unlock it with a fingerprint reader.

to me the suspension of the alarm works well

 

[Poney70]

So I just checked. and it’s a USB 3.0! I only have 1 USB port too! Any suggestions?

Use "USB 2.0 Hub", something like this => https://www.amazon.com/AmazonBasics-4-Port-USB-2-0-Ultra-Mini/dp/B003M0NURK

Also, try "fastboot flash" this TWRP => https://androidfilehost.com/?fid=17248734326145716674

Then hold "Vol+" and "Power" buttons simulaneously to boot to TWRP.

 

[hpmp109]

Hello, you didn't do some searching before attempting to flash a Weekly ROM version fom Stable ROM one:

No "Format Data" in TWRP = Get in trouble!

For your fastboot issue, are you using USB 3.0 port? You must use USB 2.0 port.

Okay, I am now in TWRP! Amazing! So, I need to format first and then install the weekly?

 

[altiner]

redmi note 7 got an update to miui 12.5 but not mi8.... it's a bummer....

MI 8 cihazımdan Tapatalk kullanılarak gönderildi

 

[Poney70]

redmi note 7 got an update to miui 12.5 but not mi8.... it's a bummer....

MI 8 cihazımdan Tapatalk kullanılarak gönderildi

Mi 8 is older than Redmi Note 7, that's why Mi 8 doesn't have Beta/Weekly ROM support from Xiaomi/Xiaomi.eu anymore.

EDIT: But Mi 8 may still get Stable MIUI 12.5 ROM => https://piunikaweb.com/2021/01/19/xiaomi-miui-12-5-update-eligible-devices-release-rollout-tracker/

 

[weikang94]

Hi Poney! Thanks for getting back to me. I am using the same USB port that I used when flashing stable ROM. How can I fix this? I have tried most variations of TWRP for Mi 10 (umi) - still stuck on fastboot!

Only flash the 3.4.0 twrp
But fastboot boot with the 1206 twrp
After you type the command, just wait for about 1-2 minutes and will boot into twrp
After that just flash the rom you want
Do the same step on every single updates

 

[Poney70]

Only flash the 3.4.0 twrp
But fastboot boot with the 1206 twrp
After you type the command, just wait for about 1-2 minutes and will boot into twrp
After that just flash the rom you want
Do the same step on every single updates

I helped him via PM. But thanks for this useful info.

 

[cXile]

On Mi 10T with this build games which support high refresh rate and can go above 60FPS are stuck at 60FPS because when opening game refresh rate changes from 144Hz to 60Hz.
On 21.1.13 and before it worked fine.

 

[PascalDollansky]

DRM protected video content can not be played on MI 10 Pro

Was no problem on previous releases

 

[xMarvin732]

Gauguin mi10t Lite only has widevine l3

 

[thegios]

i installed it last Friday, then i experience this issue today....but i am experiencing it only on 2.4ghz wifi channel...
device: k20pro premium

I reset my router, changed channel and cleared data of Adaptive Connectivity Center and now it's working

 

[thegios]

Btw, I am mistyping a lot with GBoard, seems touch is not pinpoint perfect and keyboard stutters a little

 

[GuruZone]

amazing rom! with the previous release i had a non-working sound&vibration menu, but now, now is working like a charm. big thanks! poco f2 pro

 

[slobodanboshkov]

Can admins explain this usage of 11gb on gallery app?? @admins.
Note: it is happening only on xiaomi.eu rom, not on china not on global

Sent from my Redmi K30 Pro using Tapatalk

 

[Poney70]

Can admins explain this usage of 11gb on gallery app?? @admins.
Note: it is happening only on xiaomi.eu rom, not on china not on global

Sent from my Redmi K30 Pro using Tapatalk

Answered here => https://xiaomi.eu/community/threads/gallery-app-is-downloading-a-huge-amount-of-data.59631/

 

[b1shop]

I felt lack of fluidity in the previous version on Note 7, a lot of delay when opening applications, among other things. I thought it would improve in the last version that came out, but the lake when opening the applications remained.

 

[Twizama]

Hello everybody !

On my Mi 9, everything seems to be OK.

SafetyNet OK

Widevide L1 OK

Thanks to the developers !

 

[Igor Eisberg]

Note: it is happening only on xiaomi.eu rom, not on china not on global

Of course it doesn't, because on official ROMs you don't get all the hidden features we unlock. You're comparing apples to oranges here. Some of the new features' libraries are conflicting, causing a repeated re-download. I already stumbled upon a solution for the next release.

 

[Everton Martins Dias]

Hi Poney! Thanks for getting back to me. I am using the same USB port that I used when flashing stable ROM. How can I fix this? I have tried most variations of TWRP for Mi 10 (umi) - still stuck on fastboot!

You need to boot twrp through fastboot, using
fastboot boot recovery-TWRP-3.4.2B-1206-XIAOMI10-CN-wzsx150.img