MIUI 13 MIUI 13 STABLE RELEASE


Status
Not open for further replies.
Igor Eisberg said:
Like I said, we hide it. Those on Weeklies know it already, sorry that it's news to you.
Click to expand...
It's no big deal. No one is accusing you of anything. It's just that if Xiaomi without exception released weekly firmware for all, then we would know everything about everything that appeared and what is gone. And so we have to have what we have. Thanks again for the reply. )
 
Yesterday, I installed the new ROM for Xiaomi 11T Pro (xiaomi.eu_multi_XM11TPro_V13.0.8.0.SKDMIXM_v13-12.zip) with TWRP (twrp-3.7.0_12-v7.0_A12-vili-skkk.img). The installation process was different from previous versions. It was surprisingly fast and as followed the TWRP process it was completely different from previous ROM's. The installation process finished with the attached message, which is different too.
1674544298402.png
According to the first page the ROM type changed to hybrid, which could be the reason of the new process. In spite of that the red lines (failed to mount...) are disturbing me. Would anybody and @Igor Eisberg explain it. I would appreciate it, just for my education.
Otherwise the new ROM is working properly it is smooth and fast, I do not have enough time to evaluate the battery life, hopefully it will be OK as well.
 
Last edited:
  • Like
Reactions: katerpanne, datfatty, Leo Lin and 4 others
I am having trouble installing MIUI 13 on POCO M3 Citrus. I was coming from Global ROM V12.5.10.0.RJFMIXM which I have previously installed via Mi Flash.

I formatted /data (typed "yes") and made a recovery reboot prior to install.
I put the ROM on a USB flash drive, and mounted USB OTG.

The install process stops at:
ERROR: Failed to flash cust partition. Updater process ended with ERROR: 1

I tried OangeFox and TWRP.
I searched for similar problems - the only solution in the MIUI 14 thread is to wipe cache. Unfortunately it didn't help me.

I do not know what the function of the /cust partition is. Please point me to the right direction.

I see a difference in the filename - my previous being _R_JFMIXM and the one I am trying to install is _S_JFMIXM. Is this an issue?
Obviously the other difference is the switch from Android 11 to Android 12. Is there a problem with format /data?
 
Last edited:
mozilaion said:
I am having trouble installing MIUI 13 on POCO M3 Citrus. I was coming from Global ROM V12.5.10.0.RJFMIXM which I have previously installed via Mi Flash.

I formatted /data (typed "yes") and made a recovery reboot prior to install.
I put the ROM on a USB flash drive, and mounted USB OTG.

The install process stops at:
ERROR: Failed to flash cust partition. Updater process ended with ERROR: 1

I tried OangeFox and TWRP.
I searched for similar problems - the only solution in the MIUI 14 thread is to wipe cache. Unfortunately it didn't help me.

I do not know what the function of the /cust partition is. Please point me to the right direction.

I see a difference in the filename - my previous being _R_JFMIXM and the one I am trying to install is _S_JFMIXM. Is this an issue?
Obviously the other difference is the switch from Android 11 to Android 12. Is there a problem with format /data?
Click to expand...
R refers to Android 11, S refers to Android 12. This is not an error. What error did you get in twrp? Please send a picture
 
alexabo said:
The installation process was different from previous versions. It was surprisingly fast and as followed the TWRP process it was completely different from previous ROM's. The installation process finished with the attached message, which is different too.
Click to expand...
I'm glad to see that everything works perfectly and that it's installing faster than previous ROMs.
 
  • Like
Reactions: mik101
Abbashady said:
R refers to miui 12, s refers to miui 13. This is not an error. What error did you get in twrp? Please send a picture
Click to expand...
It's the exact error I wrote the code form.
It starts flashing /cust and it's an instant error.

I installed xiaomi.eu V12.5.10.0.RJFMIXM and it installs fine. It also boots.
I did not complete the initial 12.5.10.0 setup, went back to TWRP and formatted /data (typed "yes"), wiped cache and tried immediatly (no reboot) to install V13.0.3.0.SJFMIXM. I am still getting the same error.

IMG_2023-01-24-19-13-10-528.jpg
 
mozilaion said:
It's the exact error I wrote the code form.
It starts flashing /cust and it's an instant error.

I installed xiaomi.eu V12.5.10.0.RJFMIXM and it installs fine. It also boots.
I did not complete the initial 12.5.10.0 setup, went back to TWRP and formatted /data (typed "yes"), wiped cache and tried immediatly (no reboot) to install V13.0.3.0.SJFMIXM. I am still getting the same error.

View attachment 45951
Click to expand...
Reboot in twrp mode and flash the rom again.
 
Abbashady said:
Reboot in twrp mode and flash the rom again.
Click to expand...
That's rather neither here nor there, since 12.5 is installing correctly like it always was. I've tried it now about 10 times, it's always the same error.

Also, should /data file system be F2FS while all the others are EXT4?
 
mozilaion said:
I do not know what the function of the /cust partition is. Please point me to the right direction.
Click to expand...
Knowing that won't help you solve the issue...

mozilaion said:
That's rather neither here nor there, since 12.5 is installing correctly like it always was. I've tried it now about 10 times, it's always the same error.
Click to expand...
That just looks like a TWRP issue, because there is no error before it fails, it just fails. Cache is not even mentioned in there.
Best bet is to save TWRP's log and take a look in there, it should have more details.

mozilaion said:
Also, should /data file system be F2FS while all the others are EXT4?
Click to expand...
Yes...
 
Igor Eisberg said:
That just looks like a TWRP issue, because there is no error before it fails, it just fails. Cache is not even mentioned in there.
Best bet is to save TWRP's log and take a look in there, it should have more details.
Click to expand...
I've tried all the recovery files I found in this thread and another OrangeFox 11 I had saved previously from somewhere else.
This makes 4 different recoveries and none of them can install the 13 ROM, it's always the same error in the same spot.

So I wanted to flash the Global via MiFlash, but I see there is no Global MIUI 13 out yet for citrus. (There is Global for lime.) 13 for citrus only for RU and TW markets. The hell?

EDIT: I see there is an official recovery global 13 rom. I'll try to install this one and see how it goes.
 
Last edited:
Is it normal that after installing the stable ROM on my Redmi 9t (lime) the system recognize it as Redmi Note 9 4G and Google recognize it as Pixel 2
 

Attachments

  • Screenshot_2023-01-24-21-36-34-829_com.google.android.gms-edit.jpg
    Screenshot_2023-01-24-21-36-34-829_com.google.android.gms-edit.jpg
    216.5 KB · Views: 215
  • Screenshot_2023-01-24-21-37-26-959_com.android.settings.jpg
    Screenshot_2023-01-24-21-37-26-959_com.android.settings.jpg
    230.3 KB · Views: 943
Last edited by a moderator:
mozilaion said:
EDIT: I see there is an official recovery global 13 rom. I'll try to install this one and see how it goes.
Click to expand...
Global MIUI13 installed just fine on the first try via the brigudav TWRP, which is the same first recovery I tried to install EU 13 rom and failed several times in a row.
May I suggest there is an issue with the EU ROM itself and some incompatibility with the different markets/models (juice/chime family)?
I know these are old models and this is probably the last update, but it's still very strange for EU 12.5 to install without issues, and Global 13 to install without issues, but and EU 13 to not install with the same issue on 4 different recoveries.
 
Last edited:
mozilaion said:
Global MIUI13 installed just fine on the first try via the brigudav TWRP, which is the same first recovery I tried to install EU 13 rom and failed several times in a row.
May I suggest there is an issue with the EU ROM itself and some incompatibility with the different markets/models (juice/chime family)?
I know these are old models and this is probably the last update, but it's still very strange for EU 12.5 to install without issues, and Global 13 to install without issues, but and EU 13 to not install with the same issue on 4 different recoveries.
Click to expand...
You "may suggest", but you'd be wrong because there's nothing wrong with the ROM. It's more likely that the phone is trash. Just saying.

EDIT: We reuploaded it as a Hybrid ROM so that you have the choice how to flash it (and now it might actually flash properly in recovery), since this might be the last ROM for that device.
 
Last edited:
  • Like
  • Haha
Reactions: ingbrzy and sunset_in_mars
I have bluetooth issues with my Xiaomi 12T Plato xiaomi.eu_multi_PLATO_V13.0.5.0.SLQMIXM_v13-12-fastboot
My Garmin Venu2 loses it's BT connection and can't reconnect, becauce the Garmin Connect app seems killed by that ROM after twenty or thirty minutes, while the phone is residing in my pocket (all permissions set, autorun set on, no energy restrictions, app pinned, energy saving bar set from balanced to power. No cleaning app used.

What else can I do to get the phone and watch work as they do on my Huawei P30 Pro? I am rid of that "connection request" popup all day long and no notifications after the new setup.

Another thing I miss is a connection indicator in the BT menu - all you can read is "saved".

Thanks for advice, w.
 
I have three questions,

First, how to update system app, cause everytimr I am trying to do so from Apk mirror it says can't install update from unofficial source

Second, Camera quality seems a little bit off

Third, I am picking up some Chinese text, I am using Redmi 9t (Lime) stable version
 

Attachments

  • Screenshot_2023-01-28-11-03-37-775_com.miui.securitycenter.jpg
    Screenshot_2023-01-28-11-03-37-775_com.miui.securitycenter.jpg
    120.5 KB · Views: 245
Last edited by a moderator:
datfatty said:
I have three questions,

First, how to update system app, cause everytimr I am trying to do so from Apk mirror it says can't install update from unofficial source

Second, Camera quality seems a little bit off

Third, I am picking up some Chinese text, I am using Redmi 9t (Lime) stable version
Click to expand...
1. Not officially supported on .EU, so the short answer is you don't
2. You can try playing with different versions of *no-support-for-this-app-on-this-forum* and see if they work better for you (I went through the same back in the day when .EU stopped updating for my Redmi Note 5 Pro and I switched to LineageOS):
www.celsoazevedo.com

Google Camera Ports Download

Modified *no-support-for-this-app-on-this-forum* ports (Pixel Camera) by BSG, Arnova8G2, BigKaka, Shamim, and others. Download hub for *no-support-for-this-app-on-this-forum* ports.
www.celsoazevedo.com www.celsoazevedo.com
3. I don't really have an answer for that one other than possible missed translations. You can report that in the translation section of the form. But please doublecheck that you don't have any updates for the installer/other xiaomi apps from previous releases if the device wasn't wiped before flashing the replacement rom.
 
why is the music app still showing ads? and also sometimes, the music apps and also other music and youtube suddenly stop?
 
Status
Not open for further replies.

Similar threads

ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
257K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
41K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
37K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
40K
HyperOS
KGVER
KGVER
ingbrzy
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
33K
HyperOS
emre_66
E
Top Bottom
Back