HyperOS 1.0 HyperOS 1.0 STABLE RELEASE


I just received an new update on stable, but i dont see any update on sourceforge.
Just a notice and thanks anyway
 

Attachments

  • 1000002481.jpg
    1000002481.jpg
    140.3 KB · Views: 249
Last edited by a moderator:
It is a bug in the app. There is no update. If you see the version shown, it is the same version you already have installed. If you close the Updates app and reopen it, the update disappears.

Inviato dal mio 23127PN0CG utilizzando Tapatalk
 
  • Like
Reactions: katerpanne
AfgPlaya said:
Unfornately that doesnt help.not all apps were compiled new :(
so i can not use all the apps.
Click to expand...
Let the Mobile Phone complete load all Apps. Wait 3 or 5 minutes and then try the commands. It will fix it

Gesendet von meinem 2210132G mit Tapatalk
 
I give up, 1.0.11.0 has even worse battery life than 1.0.8.0 on Nuwa. I'm going back to 1.0.7.0, the last one known to last over 24 hours on a single charge, at least close to it, not less than 12 hours with constant warm body and full awake bar.
 
  • Like
Reactions: Smaritz and Cedric42
leledumbo said:
I give up, 1.0.11.0 has even worse battery life than 1.0.8.0 on Nuwa. I'm going back to 1.0.7.0, the last one known to last over 24 hours on a single charge, at least close to it, not less than 12 hours with constant warm body and full awake bar.
Click to expand...
Maybe we should just get PinePhones, install our favorite Linux distro on it and forget about planned obsolescense.
 
gyr0ray0 said:
Maybe we should just get PinePhones, install our favorite Linux distro on it and forget about planned obsolescense.
Click to expand...
I would, if only it's easily accessible here and have decent performance and camera. But it's not, unfortunately.
 
As someone here wrote that flashing the latest a couple of times fixed some issues, I've tried.

It seems to have worked!
I don't believe in flashing a couple of times, but I did flash the latest again once, over the unstable latest.
And so far no more lagging and freezes (couple of hours).

So YMMV, but if you have issues, besides the commands to rebuild the apps, try to (dirty) flash same firmware again.
This 2 things and SMS permissions for Google services (to fix GPay/Wallet), seem to fix most issues mentioned here.
 
just seen the a new stable ROM update available and tried to run on the phone from phone menu, downloaded and restarted, now stacked in fastboot mode, look like is bricked. Look like bootloader is locked as well, what is the options now? and what caused the brick?
 
stkrup said:
just seen the a new stable ROM update available and tried to run on the phone from phone menu, downloaded and restarted, now stacked in fastboot mode, look like is bricked. Look like bootloader is locked as well, what is the options now? and what caused the brick?
Click to expand...
EU rom does not lock the bootloader.
If you don't have TWRP installed, you can't install it from the menu?
 
Last edited:
stkrup said:
just seen the a new stable ROM update available and tried to run on the phone from phone menu, downloaded and restarted, now stacked in fastboot mode, look like is bricked. Look like bootloader is locked as well, what is the options now? and what caused the brick?
Click to expand...
Have you twrp installed ?
 
Hi guys after update my Xiaomi 14 houji 1.0.45 (stable) the battery consumption has increased a little and this annoying red/pink tint from the Google apps. Anyone knows the fix?
 
  • Like
Reactions: Ryoma
Qwertys13 said:
MIX 4 HyperOS 1.0.4.0
Installed update via Fastboot from 1.0.3.0.
Mobile network does not work and various errors appear. The device overheats.
Wi-Fi and Bluetooth work fine.
Installed this rom three more times on top, does not help.
Another user of MIX 4 got the same problems with 1.0.4.0.
Is it possible roll back to 1.0.3.0 from 1.0.4.0 via update_rom.bat?
Click to expand...
as an owner of mix 4 1.0.3.0 stable eu rom i am not encouraged to update after reading your post, any updates?? did you solve the problem? i did not see any comments to the post...
 
guy666 said:
as an owner of mix 4 1.0.3.0 stable eu rom i am not encouraged to update after reading your post, any updates?? did you solve the problem? i did not see any comments to the post...
Click to expand...
The update installed correctly after several updates on top. The update is very stable, fast, but the battery drain drops x 1.5 faster than the previous update. If you care about battery life, and not smoothness, stay on 1.0.3.0

Upd: After 5 days, the discharge is almost back to normal, apparently the transition to the new version has ended
 
Last edited:

raintech​

xiaomi.eu

Fix Networks for GARNET

Mobile sees the SIM but you have no signal?nal? Download this package: garnet_modem_global_A14 (modem version: Global_OS1.0.14.0.UNRMIXM) Garnet_modem_globa_17l.zip/file (modem version: Global_OS1.0.17.0.UNRMIXM) Installation in fastboot: 1. Unzip the ZIP file on the PC 2. Connect the mobile...
xiaomi.eu xiaomi.eu
 
Last edited:
  • Like
Reactions: raintech and katerpanne
Updated my redmi note 13 4G sapphiren

No issues so far.

Just the same issue since .02 release:
big toast notifications, but i know that's Xiaomi fault.

Thank you for this update guys.
Good job !
 
Am I the only on shennong and current stable ver. , that im dealing with slow charging than expected? almost 40 minutes , im used to fully charged to about 20-21 minutes...Just curious , tried 3 different original cables.
 
This version for fuxi xiaomi 13 is a little buggy. Google password manager pops up even if it is disabled, the battery is going crazy. I miss the 1.0.8.0 one

Also I am not receiving call notifications from WhatsApp

Sent from my 2211133G using Tapatalk
 
KGVER said:
Am I the only on shennong and current stable ver. , that im dealing with slow charging than expected? almost 40 minutes , im used to fully charged to about 20-21 minutes...Just curious , tried 3 different original cables.
Click to expand...
I have shennong 14 pro not this problem inhave charger 120W and full utra charger 20 min 100%
 
  • Like
Reactions: KGVER
alinpr18 said:
I have the RN12 and the complete animations and textures are there. I think it is because of the HyperOS version
Click to expand...
What version do u have? I have the RN12 with HyperOs 1.0.11.0 and i don´t have any animations/textures...
 
Last edited:
KGVER said:
Am I the only on shennong and current stable ver. , that im dealing with slow charging than expected? almost 40 minutes , im used to fully charged to about 20-21 minutes...Just curious , tried 3 different original cables.
Click to expand...
Alioth and venus, both on last stable, have the same problem. I am charging with about 8W-9W instead of 20W+ ... WIRED
 
  • Like
Reactions: KGVER
You must log in or register to reply here.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
962
Views
396K
HyperOS
iGears88
iGears88
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
341K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
45K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
54K
HyperOS
KGVER
KGVER
Top Bottom
Back