MIUI 10 8.12.20


Do you like this MIUI version?


  • Total voters
    338
Status
Not open for further replies.

You saved me from the Xmas doldrums, now I have 122 pages of radiobureaucracy to read!

I like this, it tells you clearly what they think of the end user:

"4.2.10.3 Requirements
The geographic location determined by the equipment as defined in clause 4.2.10.2 shall not be accessible to the user.
If the equipment cannot determine the geographic location, it shall operate in a mode compliant with the requirements
applicable in any of the geographic locations where the equipment is intended to operate. "
 
You saved me from the Xmas doldrums, now I have 122 pages of radiobureaucracy to read!
The perfect cure for Insomnia

I like this, it tells you clearly what they think of the end user:

"4.2.10.3 Requirements
The geographic location determined by the equipment as defined in clause 4.2.10.2 shall not be accessible to the user.
If the equipment cannot determine the geographic location, it shall operate in a mode compliant with the requirements
applicable in any of the geographic locations where the equipment is intended to operate. "
As I mentioned in a post on this topic in last week's thread, this should be using the MCC (Mobile Country Code) which is read from SIB 1 from GSM, UMTS or LTE networks as the first part of connection establishment in Idle mode.

Taking it off the SIM is not in compliance with this and other ETSI/3GPP specifications, as this makes the geolocation "accessible to the user" (and therefore contravening the "License to Operate" certification for EU countries) and will not give the correct location when roaming, or in this case here, "spoofing" the system with a different country's SIM card.
 
Last edited:
The perfect cure for Insomnia


As I mentioned in a post on this topic in last week's thread, this should be using the MCC (Mobile Country Code) which is read from SIB 1 from GSM, UMTS or LTE networks as the first part of connection establishment in Idle mode.

Taking it off the SIM is not in compliance with this and other ETSI/3GPP specifications, as this makes the geolocation "accessible to the user" (and therefore contravening the "License to Operate" certification for EU countries) and will not give the correct location when roaming, or in this case here, "spoofing" the system with a different country's SIM card.

Which is why I suppose there is no hope of my Huawei pocket routers ever allowing 5GHz wifi while roaming, as they chose the (for them) safe path of shutting it down entirely.

Remains to be seen how various mobile phones will handle this.

Now we're off to see Mary Poppins with our 11 year old daughter, so I'll leave the wifi stuff for now.

Really we just want to find another "set it and forget it" setup, like we've had for a few years now, but that may be wishfull thinking, as things have become significantly more complicated.
 
Last edited:
where is the adaptive bat in option?
Here:

880a1d657e79db7cf256d5a06deb5446.jpg


Sent from my MIX 2S using Tapatalk
 
Hi
I'm updting to 8.12.20v and my Mi8SE is taking too long on Flashboot screen, any clue??
it's normal??
tnks
 
I would like very much that there are more shortcuts in the vault of applications, such as weather, music controller, it would be very nice to add them.
 
That is for Kate. Do not flash on Kenzo

Sent from my MIX 2S using Tapatalk

Thanks buddy, it's because they do not have roms for kenzo and for the most wanted few bugs that apparently have already been fixed in the roms after 10.1.
Would I miss some functionality by flashing the kate rom or do I brick my device?
 
No problems with Mix2 here.
Noticed some differences between xiaomi.eu_multi_MIMix2_8.12.13_v10-8.0 and xiaomi.eu_multi_MIMix2_8.12.20_v10-8.0 in file that contain commands for handling system apps (META-INF\com\xiaomieu\xiaomieu.sh).
More important: In xiaomi.eu_multi_MIMix2_8.12.13_v10-8.0 much more important partitions are available for backup - it seems partition layout has changed silently
@graw2 Could this have happened?
 
I thought this 10.3 has camera 2 API enable by default. In previous ROM, I have to modify the buildprop to get it enable but recently, maybe the 10.2 also get it enable in the Rom
 
Thanks buddy, it's because they do not have roms for kenzo and for the most wanted few bugs that apparently have already been fixed in the roms after 10.1.
Would I miss some functionality by flashing the kate rom or do I brick my device?
Good chance to brick you phone, or in better case install will be failed...

Sent from my MIX 2S using Tapatalk
 
  • Like
Reactions: guimaraestr
Noticed some differences between xiaomi.eu_multi_MIMix2_8.12.13_v10-8.0 and xiaomi.eu_multi_MIMix2_8.12.20_v10-8.0 in file that contain commands for handling system apps (META-INF\com\xiaomieu\xiaomieu.sh).
More important: In xiaomi.eu_multi_MIMix2_8.12.13_v10-8.0 much more important partitions are available for backup - it seems partition layout has changed silently
@graw2 Could this have happened?
I don't think partition layout changed. Changing partition layout only possible with MiFlash flashing...

Sent from my MIX 2S using Tapatalk
 
Flashed on mi maxhydrogen, system ui stopped, please look into it. It seem other having same problem. Can do nothing only blank screen. Hope dev can look into this issues. Thankyou
return to 8.12.13 with nandrorom twrp backup.. same issue... after wipe...
 
Global Mix 2S
Is anyone able to record video over 30fps?
I've tried *no-support-for-this-app-on-this-forum* and it gives me the toggle between 30 and 60fps but the files are always 30fps regardless. I had the same problem with the previous week.

Edit:
I tried Open Camera (With Camera2 API enabled) and it crashes if I set the framerate above 30fps. What's odd is when I switch Open Camera to video mode and it displays it's toast message with the video format it shows 56Mbps, which is insanely high. This is regardless of the bitrate I specify (including "default").

Can somebody with a Mix 2S test this?
 
Last edited:
I just realized the GPS is buggy with the latest weekly releases for Mi 8 (dipper). It cannot accurately lock current position and while driving with Google Maps on, the position just frequently keeps changing between left and right road lanes (I'm actually driving on the left side) but the position in Maps is on the right.

The online ride-hailing apps such as GOJEK and GRAB also have a hard time locking my current location, so I need to manually choose the pick up point.
 
  • Like
Reactions: mazok
Battery indicator updates every much time and when I reboot. Also recovery doesnt show the same battery.
 
Last edited:
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
Replies
51
Views
45K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
54K
  • Locked
HyperOS 1.0 24.6.3
Replies
46
Views
46K