MULTI 6.4.7


Do you like this MIUI version?

  • Total voters
    331
Status
Not open for further replies.
Hi guys,

I know it is Monday and you've probably solved this problem already, but I'll write done what worked for me.
Again I am using CANCRO!

1. Flashed 6.3.25 via TWRP
2. WIPE via TWRP without wiping storage (this is the recommended option)
3. In the 6.4.7 ROM in the archive I have replaced /Recovery/twrp.img with the latest 3.0.2-0 version.
4. Flashed via TWRP 6.4.7
5. Again WIPE
6. All done!

I was lucky I've performed a backup last week so everything was restored back to normal in less than an hour.
It took me though a good 4 hours to come to that solution.

CHEERS!

outofthebox said:
Thanks for you work!

I have collected incidents and details (I hope this is not an issue for this forum, or please excuse me if so):







Different platforms but the same issue - unable to install 6.3.31/6.4.7 - stuck on boot logo.
But can successfully downgrade to 6.3.24 and below.
Wiping cache&dalvik does not help.
nemo81 tested other TWRPs with the same result.

From my side can add that it takes much more time for TWRP to perform his part of process for 6.3.31/6.4.7 before reboot.
6.3.24 is being processed much faster.

I can provide some logs, but have no idea what to do..
Click to expand...
 
  • Like
Reactions: outofthebox
@ingbrzy !! Very important please read and reply. I did a clean installation again of the hennessy rom 7.2.5.0 stable and on reboot i set english as first language, but when i go on security app to enable the possibility to unlock apps by fingerprint sensor i don't find anything. I think that some went wrong to translate it!!!
 
Hi, tanks for your work.
I have a question:
I have on My mi3 the stable chinese version translate by You (7.1.3.0 kxdcnck) and i would install the 7.2 mm. How i have to do?
In the official store the last version is 7.1.5.0 ( is the mm one?).
 
Thanks for your work, it works fine in my Redmi 2 (wt86047)
I only found some overheating and battery drain issue, I formatted the SD card and the issue was gone.
Also same issue about only the 3 icons in battery Hardware (Screen, Idle device and bluetooth)
 
buurak said:
Hi there, first time here :)

During the weekend I updated my Redmi3 to this latest miui 6.4.7 version (with problems! While I did it via update my phone didn't want to load the system [bootloop], so I flashed official developer room and than install via TWRP this particular (6.4.7) soft).

Everything works fine (except I lost all the data...)
Click to expand...
Why did you do it FR? For me too in updater phone goes to bootloop. No stress. I going to the Fastboot and flash this recovery http://en.miui.com/thread-244098-1-1.html in recovery install the last update and now have Redmi 3 with all my data and apps with last ROM. Dont know why, but this i do it 2x, Because after install update, the recovery is bad. Sorry for my english

Odesláno z mého Redmi 3 pomocí Tapatalk
 
Thanks for great update! :)

The search bare on canco is not translated. It doesn't bother me the slightest, just in case you want to know :)

Picture.png
 
on my Mi2 battery drain is more than terrible. A solution is existing? how to go back to previous version?

Envoyé de mon MI 2 en utilisant Tapatalk
 
Hi,
Yesterday I make the update from 6.3.24 to 6.4.7… all goes ok, thanks for your work.
Battery in standby mode seems better than ever 20 hours with an awesome 25% of battery used :), of course today I don't use the mobile except for 6 or 7 mails in my 3 email accounts and a few whatsapps… I'll see during this week if netsurfing and screen on have a decent drain.
Anyway the problems with the wrong carrier name has passed, I have back the correct name of my phone carrier.
The problem with the scanlines on the live hdr mode on the camera still present.
I have the spanish language set on the phone, and I have the chinese characters on the search app, it doesn't work if I make a data deletion on the application menu, it still present, but it's not a thing that annoys me.
I have a Mikey and until that rom, the phone never ask me for what kind of insert I have on the jack enclosure, I have to open the Mikey app and then the phone ask me for what kind of insert, but now if I restart the phone, the phone itself ask me without having to open the mikey app, totally practical! :)
 
  • Like
Reactions: junkname
misandrix said:
waiting for OTA on Mi4C, thank you for the update
Click to expand...
I'll recommend you to download yourself the rom and apply it via updater app, because it seems that the OTAs are too hard to view these days, it's a hard work for the team to upload it because of the limitations of the OTA server (you can read it in other threads of roms)… I decide to do it by myself and no problems, until I made it I have my phone stucked in 6.1.18 ver.
 
  • Like
Reactions: decadance and Stefano131270
Boris Shirov said:
Hi guys,

I know it is Monday and you've probably solved this problem already, but I'll write done what worked for me.
Again I am using CANCRO!

1. Flashed 6.3.25 via TWRP
2. WIPE via TWRP without wiping storage (this is the recommended option)
3. In the 6.4.7 ROM in the archive I have replaced /Recovery/twrp.img with the latest 3.0.2-0 version.
4. Flashed via TWRP 6.4.7
5. Again WIPE
6. All done!

I was lucky I've performed a backup last week so everything was restored back to normal in less than an hour.
It took me though a good 4 hours to come to that solution.

CHEERS!
Click to expand...

Thanks for update! I see solutions with wipe, but due to lack of time and risk, I'm still on 6.3.17.

Just wondering, wipe without wiping storage - is this full wipe, or a kind of wipe for system partition without wiping user part?
What backup do you use?
 
outofthebox said:
Thanks for update! I see solutions with wipe, but due to lack of time and risk, I'm still on 6.3.17.

Just wondering, wipe without wiping storage - is this full wipe, or a kind of wipe for system partition without wiping user part?
What backup do you use?
Click to expand...

Factory reset. You won't lose files on card or personal files on phone storage. You can use miui backup.

Cheers! ;)

Stefano - Redmi2 16gb (2014813)
 
I have a problem with this 6.4.7 ROM on my two Mi4c
I can not adjust any more properly the sound level of my remote Bluetooth speaker...
The Bluetooth multimedia sound level variation by the side buttons + or - is erratic.
It can only be adjusted in the "sound and vibration" / volumes/ multimedia button in the parameter menu...
Can someone confirm the bug...
Only on Mi4c, or also on other phones as Redmi 3, or others?

Latest Rom installed 6.3.3 was quite OK on my Mi4c for Bluetooth sound level adjustment...
Since 6.3.10 up to 6.3.31, it was the galery display resolution which was wrong (blur when zoomed)
Now, the Bluetooth multimedia volume is NOK...
2 bugs corrected, one more added at each new release...
Not serious...
Best regards
Gluto
 
HI TO ALL,

CAN ANY ONE HERE TELL ME , WHICH ROM I SHOULD INSTALL ON MY REDMI NOTE 3G WHICH GIVES MAX BATTERY BACKUP AS WELL AS SMOOTH OPERATING???????

NOTE : AM USING REDMI NOTE 3G HANDSET.

AWAITING FOR PROMPT REPLY FROM YOU GUYS.

CURRENTLY AM ON MIUI BY XIAOMI.EU 7.2/STABLE 7.2.1.0(KHDCNDA)

PLEASE SUGGEST IN THIS MATTER
 
Status
Not open for further replies.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
169
Views
62K
HyperOS
JHB1100
J
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
268K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
41K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
38K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
42K
HyperOS
KGVER
KGVER
Top Bottom
Back