MIUI 12.6 21.6.9


Do you like this MIUI version?

  • Total voters
    161
Status
Not open for further replies.
Hi to everybody.
I have a F2 pro and Since from the Last updates (dont Know really what) i feel my Phone warm a lot and slow charge, even with fast charge. I don't use original charger and cable because i know it can damage the flat and charge board, because of the turbo charge (i already see photos and my seller, already repair some).
Downgrade to 28/4/28 and it feels more normal. Right temperature and faster charger (i can get almost 2700mah instead the instable lower than 600/500mah).
Anyone with this syntoms?

Sorry for my english
 
joaojacinto said:
Hi to everybody.
I have a F2 pro and Since from the Last updates (dont Know really what) i feel my Phone warm a lot and slow charge, even with fast charge. I don't use original charger and cable because i know it can damage the flat and charge board, because of the turbo charge (i already see photos and my seller, already repair some).
Downgrade to 28/4/28 and it feels more normal. Right temperature and faster charger (i can get almost 2700mah instead the instable lower than 600/500mah).
Anyone with this syntoms?

Sorry for my english
Click to expand...
If you are worried about the fast charge, you could do what I do - I use the USB ports from my laptop, which puts out a gentle charge. This also doubles up to transfer files between my laptop and phone. My phone stays quite cool.
I would be cautious of different chargers unless you are sure of the quality and output. I only use Xiaomi power supplies when plugging into the mains. I do not think that the cable quality is too critical, providing it works satisfactorily.

I think that you are right to consider the care of the battery, and how you charge it. I only use the turbo charge if I need a quick charge. And from time to time, I let the battery drop very low - to less that 10%, and then charge it gently through the laptop. Because now the battery charging is governed by Artificial Intelligence (AI), I frequently leave the phone plugged into the laptop for quite long periods.
 
PetarC said:
Just one question for our great developers: is it possible to add com.filmic.filmicpro in build.prop for Xiaomi MI 10T Pro so we can us all cameras with Filmic Pro? Thank you!
Click to expand...
We don't shove miscellaneous mods to our ROMs, that very few people care about anyway. Use a Magisk module if you need mods unrelated to MIUI.
 
  • Like
Reactions: biscoot
Iain_B said:
If you are worried about the fast charge, you could do what I do - I use the USB ports from my laptop, which puts out a gentle charge. This also doubles up to transfer files between my laptop and phone. My phone stays quite cool.
I would be cautious of different chargers unless you are sure of the quality and output. I only use Xiaomi power supplies when plugging into the mains. I do not think that the cable quality is too critical, providing it works satisfactorily.

I think that you are right to consider the care of the battery, and how you charge it. I only use the turbo charge if I need a quick charge. And from time to time, I let the battery drop very low - to less that 10%, and then charge it gently through the laptop. Because now the battery charging is governed by Artificial Intelligence (AI), I frequently leave the phone plugged into the laptop for quite long periods.
Click to expand...


Hi.
I think my English is not the best, but enough to understand.
What I meant is that since the last
updates, I don't know which one, the phone started to overheat and charge slowly. I don't use the original cable, so as not to activate the turbo charge, because I know the harm it does, but I always used cables and chargers from guaranteed and recognized brands that made me charge fast and without temperature problems. Since some update after 28/5/21 something happened that caused it to have very slow loads (around 600mah, when the normal values were above 2300mah) and an excessively high temperature. I was trying to figure out if it happened to anyone else
 
joaojacinto said:
Hi.
I think my English is not the best, but enough to understand.
What I meant is that since the last
updates, I don't know which one, the phone started to overheat and charge slowly. I don't use the original cable, so as not to activate the turbo charge, because I know the harm it does, but I always used cables and chargers from guaranteed and recognized brands that made me charge fast and without temperature problems. Since some update after 28/5/21 something happened that caused it to have very slow loads (around 600mah, when the normal values were above 2300mah) and an excessively high temperature. I was trying to figure out if it happened to anyone else
Click to expand...
I understand what you are saying. Unless other people are reporting the same problem - of overheating - then it is almost certainly a problem with your phone / or settings. If you notice, with each changelog in the update app, it also says, "This changelog doesn't mention all changes made by Xiaomi.eu or Xiaomi." Therefore there may be other unseen changes that might be affecting your phone.
You will have to look under /Settings/Battery/ and analyse using the graph what it is that is using the power and causing the phone to heat up.
 
Iain_B said:
I understand what you are saying. Unless other people are reporting the same problem - of overheating - then it is almost certainly a problem with your phone / or settings. If you notice, with each changelog in the update app, it also says, "This changelog doesn't mention all changes made by Xiaomi.eu or Xiaomi." Therefore there may be other unseen changes that might be affecting your phone.
You will have to look under /Settings/Battery/ and analyse using the graph what it is that is using the power and causing the phone to heat up.
Click to expand...
One of the first posts on this tread complains the same and on https://xiaomi.eu/community/posts/609816/bookmark
 
Last edited:
apk11 said:
Which one?

Beside, i know exatly, what i must to write in there, so i dont need magisk module if i can write the file, as is expected normally.
Click to expand...
You can make a 'module' yourself but you can use an existing module - install from Magisk Repo:
Magisk Hide Props Config (MHPC)

From any terminal app, run the command:
props

It will list you the options, take an option (number 4 or so):
Add/Edit custom props

and follow its command-line-interface responses
 
Last edited:
  • Like
Reactions: katerpanne
Very good build. Just clean flashed from 20.11.18 ( best MIUI 12.x battery life + smoothness for Mi 10/10 Pro ) and I'm quite happy with this build to have less small problems! Tks alot!
 
Hi ,any way to get banking app to work with contactless payment ?
I am on redmi k40 pro+
 
Last edited:
Well, I'm on Weekly 21.6.2 on my Mi 11 ultra Chinese version. I tried to install this build but always gets that message " failed to decrypt data for user 0". I'm using the TWRP that is located here:
androidfilehost.com

Mi11Ultra(Pro)-twrp3.5.1-recovery-21.5.9-decrypted.img | by Orjon for Generic Device/Other

Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com androidfilehost.com

I made sure that I'm entering the correct pin that I'm using for screen lock but still no way . I tried all of the following but all of them failed to solve the problem:

1- I tried to change the screen lock to password and pattern. I made sure I'm entering the correct password or pattern.
2- I removed the screen lock totally. got the message "failed to decrypt user 0 with default password" when I tried to wipe cache/ dalvik cache.
3- I tried to remove any saved fingerprints. Still no luck.

So what can I do now? is the only way is formatting data to be able to install this build?
 
Newbie here , If I install MIUI EU weekly ROM will I need to install ROM from TWRP everytime, or is there OTA updates.
 
Iain_B said:
I think that you will have to analyse yourself what is using the power / generating the heat, and make the necessary adjustments to your settings.
Click to expand...
Only in charge . Low speed on charge and overheat.
Now with 28/5/21 it is "quite" good
 
lordvoldmort89 said:
Well, I'm on Weekly 21.6.2 on my Mi 11 ultra Chinese version. I tried to install this build but always gets that message " failed to decrypt data for user 0". I'm using the TWRP that is located here:
androidfilehost.com

Mi11Ultra(Pro)-twrp3.5.1-recovery-21.5.9-decrypted.img | by Orjon for Generic Device/Other

Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com androidfilehost.com

I made sure that I'm entering the correct pin that I'm using for screen lock but still no way . I tried all of the following but all of them failed to solve the problem:

1- I tried to change the screen lock to password and pattern. I made sure I'm entering the correct password or pattern.
2- I removed the screen lock totally. got the message "failed to decrypt user 0 with default password" when I tried to wipe cache/ dalvik cache.
3- I tried to remove any saved fingerprints. Still no luck.

So what can I do now? is the only way is formatting data to be able to install this build?
Click to expand...
Hello,

Some users reported this decryption issue and found a possible workaround:

1) Phone booted to System: Move your ROM file on your computer

2) Phone booted to TWRP: Transfert the ROM file from your computer to your phone, via MTP

3) In TWRP, go in "Installer" menu and navigate to this folder => /data/media

4) You will find the ROM file and you can install it now. ;)

Hope it works for you, I don't have this device. :)
 
  • Like
Reactions: biscoot and lordvoldmort89
ultimatepichu said:
There is an app called "Updater". It can help you check for updates and install after you confirm it. But it will reboot into TWRP to install the ROM.
Click to expand...
Btw, for Updater to work properly, miuipolska.pl must not be blocked by an ad-blocker, firewall (or by Private DNS)
 
In addition to the incorrect date formatting in SMS / messages, when you select, and then deselect messages, you still go to the bottom (start/earliest) of the list, so you have to scroll back to the top (latest) msg again.
... and widgets are still not organised in any order - alphabetical would be nice ;)
 
Iain_B said:
... incorrect date formatting in SMS / messages ...
Click to expand...
Will see what we can do about that.

Iain_B said:
... when you select, and then deselect messages, you still go to the bottom (start/earliest) of the list, so you have to scroll back to the top (latest) msg again.
Click to expand...
Xiaomi's mess, tell them to clean it up.

Iain_B said:
... and widgets are still not organised in any order - alphabetical would be nice ;)
Click to expand...
Nothing we can do about the resolving order, it's managed by the system.
 
  • Like
Reactions: biscoot and Iain_B
@Igor Eisberg Thanks for the ROM. Very polished. I have done a clean flash however the problem is that the battery percentage doesn't increase while i attach the charging cable. I am using official cable and charger. The percentage keeps dropping and the phone turns off even while attached to the cable. The phone does show the charging indicator but the percentage doesn't increase. I have tried to delete batterystats.bin and do a full charge cycle but it doesn't help. It was alright with offical rom. I am wondering if this could be a bug?
 
Status
Not open for further replies.

Similar threads

ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
245K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
41K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
36K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
38K
HyperOS
KGVER
KGVER
ingbrzy
  • Locked
HyperOS 1.0 24.6.3
Replies
46
Views
38K
HyperOS
din.ibrahim
D
Top Bottom
Back