MIUI 13 MIUI 13 STABLE RELEASE


Status
Not open for further replies.
Folks need help. Something doesn't work strangely ... a friend has unlocked his 12S Ultra and i have to flash xiaomi.eu.
So i do like at my Ultra: i put twrp (boot and then flash), wipe all and want install xiaomi.eu but here is the thing. I put the zip on the phone but twrp doesn't show it. :emoji_sweat:
I try another USB or reboot, its just not there. It shows / acct data and another things.
If there is an older fastboot version of the Rom, installing this could be easier. Just download it to your pc, unpack, connect phone to pc whilst in fastboot, and run "first install.bat".

After that you can update via twrp
 
  • Like
Reactions: Reekax
MIUI 13.0.11 is installed. After the first try with twrp and xiaomi.eu its stuck on fastboot mode everytime so i download that and do .bat to bring the system back.

But can't handle to flash xiaomi.eu, after format the twrp doesn't show folders like DCIM, download. I dunno why.
 
MIUI 13.0.11 is installed. After the first try with twrp and xiaomi.eu its stuck on fastboot mode everytime so i download that and do .bat to bring the system back.

But can't handle to flash xiaomi.eu, after format the twrp doesn't show folders like DCIM, download. I dunno why.
It doesn't show you the folders because you did a format
 
Hello all, I'm completely new to the MIUI world (I recently bought the Redmi Note 11) and this is my first time using a Mi device. So I ask for your understanding.

I just have some few questions regarding this rom and how to install it.

1. Can I install this on top of the stock rom without losing my data? (installed apps, settings etc)

2. Will this trip the encryption/warranty of the device? (like in samsung, the knox thing)

3. From the download links for my device, whats the one I need to download if ever I decide to install this ROM?

4. Do these roms also have the latest security updates by google?

Thank you all in advance.
The most important thing is to know exactly what device you own. Xiaomi.eu does not support all versions of Redmi Note 11****

1 - No way
2 - No problem with encryption / it will affect the warranty, but it is possible to restore the device to its original state before making a claim.
3 - It depends on the device model you have (you need TWRP, xiaomi.eu ROM, PC drivers)
4 - Security patches from Google are updated along with the ROM

How to install xiaomi.eu ROM
or
 
  • Like
Reactions: katerpanne
Haha yes but after that i put the zip on the phone while mount and twrp don't show it bro. Just strange /

Also a problem while format it shows / data device busy
 
Haha yes but after that i put the zip on the phone while mount and twrp don't show it bro. Just strange /

Also a problem while format it shows / data device busy
After formatting, your zip file will be in the data/media folder.
 
or its this way: install and AFTER wipe?

i think all the time first WIPE and then install i remeber to do so on my own 12s U


no, data is empty.
After formatting data in recovery mode, restart the phone in recovery mode. Take the zip file from the computer to the phone and flash it, it's that simple.
 
or its this way: install and AFTER wipe?

i think all the time first WIPE and then install i remeber to do so on my own 12s U


no, data is empty.
No wipe, just "Format Data" after installing the ROM.

1- reboot your device into system
2 - go to TWRP again (the storage will be visible)
3 - copy the ROM to your phone
4 - install ROM
5 - Perform "Format Data"
6 - reboot into the system.

 
Last edited:
  • Like
Reactions: Reekax
hi, I can't find mi 11t in the firmware list
Your device is not supported by the xiaomi.eu team. The reason is the chipset from MediaTek
 
  • Like
Reactions: katerpanne
After formatting data in recovery mode, restart the phone in recovery mode. Take the zip file from the computer to the phone and flash it, it's that simple.
Thanks but as i said i did that. But twrp doesn't show download folders or anything just /sd card data and so on but all is empty ???
 
No wipe, just "Format Data" after installing the ROM.

1- reboot your device into system
2 - go to TWRP again (the storage will be visible)
3 - copy the ROM to your phone
4 - install ROM
5 - Perform "Format Data"
6 - reboot into the system.

I do factory reset and format data before flashing. I am doing format data after flashing.
 
It is unnecessary to do "Format Data" twice.
If you "Format Data" before installing the ROM, a lot of new devices in TWRP will have a problem accessing (visibility) the storage. And reboot recovery doesn't help either. Therefore, the procedure I described is simpler and the result is the same.
 
  • Like
Reactions: Reekax
Yes, I understand what you mean, but I've done it 5-6 times so far and I haven't encountered any problems. I think I'm doing this because it makes more sense to flash a rom on an empty system. But I'll take what you said into consideration.
It is unnecessary to do "Format Data" twice.
If you "Format Data" before installing the ROM, a lot of new devices in TWRP will have a problem accessing (visibility) the storage. And reboot recovery doesn't help either. Therefore, the procedure I described is simpler and the result is the same.
 
Try this instruction, just install and want to reset but install fails. I don't understand it. Am in the field for many years and flash surely 50+ devices.
 

Attachments

  • 58204CBF-0B5B-40F3-A76C-CB927318D04B.jpeg
    58204CBF-0B5B-40F3-A76C-CB927318D04B.jpeg
    1.7 MB · Views: 153
TWRP update shows ERROR: 1 / can not mount system ...
- Solution:
-> while you are in TWRP reboot your device in recovery mode
-> try to install the rom again
-> if it will fail, reboot in recovery again
"reboot recovery" means to restart TWRP Recovery from TWRP "Restart - Recovery"
-> sometimes you need more then one try (Repeat the process until the installation succeeds.)
 
Oh didn't see that before. Thank you it works after 2 reboots to recovery. After install i reset and now it only boots to twrp. I do reboot system and show white MI logo then goes to twrp? Twrp show internal (0 mb)
 
Did you do "Format Data" after installing the ROM? You should not have done any wipe/reset.
 

Attachments

  • Format_Data.png
    Format_Data.png
    79.3 KB · Views: 181
  • Like
Reactions: katerpanne
Yes like in the screenshots and as you said before.
Im coming from standard miui 13.0.11.

Install xiaomi.eu and format data.
 
No wipe, just "Format Data" after installing the ROM.

1- reboot your device into system
2 - go to TWRP again (the storage will be visible)
3 - copy the ROM to your phone
4 - install ROM
5 - Perform "Format Data"
6 - reboot into the system.

Did so and boot always to twrp.
 
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
38K
Replies
51
Views
31K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
33K
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
30K