MIUI 13 MIUI 13 STABLE RELEASE


Status
Not open for further replies.
Sorry, might be a stupid question, but I'm new to Xiaomi.EU and don't want to mess it up when flashing.
I have a Poco X3 NFC - Can I use the Rom file for the Poco X3 Pro as well, or only files that are listed for the X3 NFC version-only?

Thanks very much in advance!
You can only use a ROM compatible with your phone
 
  • Like
Reactions: pht1979
Hi all,

on my POCO F3 I'm on 13.0.6 and I would to upgrade to 13.0.9. The device is rooted, Magisk is last version [ 25.2 (33) ] and is hidden and I have only two magisk modules active. I also have TWRP 3.6.2._2-Nebrassy installed, and I access It with a password that decrypts the partitions. Because of 13.0.9 is not fastboot, I would like to understand how to flash It and I'd like an help from you. I'd like to UPDATE without loosing data or format anything. For what I understood, I have to:

- Unhide magik
- Disable magisk modules and restart
- Copy "xiaomi.eu_multi_HMK40_POCOF3_V13.0.9.0.SKHCNXM_v13-12.zip" on the phone.
- Restart on TWRP...and then?

I saw many many posts and articles but I'm confused on what to do on TWRP without loosing data and without reconfigure phone from scratch.

Also, after this I have to have root access again, suggestion also on this?

Thank you
 
It depends of Xiaomi. Theoretically, according to their Android Enterprise Recommended devices page, Mi 10T Lite should be supported until October 2023, but it may not concern Redmi Note 9 Pro 5G (Chinese version of Mi 10T Lite with 108 Mpx camera).
Thank you, i will wait. I think there is not much difference between the stable and the weekly and the weekly works for me.
 
Hi all,

on my POCO F3 I'm on 13.0.6 and I would to upgrade to 13.0.9. The device is rooted, Magisk is last version [ 25.2 (33) ] and is hidden and I have only two magisk modules active. I also have TWRP 3.6.2._2-Nebrassy installed, and I access It with a password that decrypts the partitions. Because of 13.0.9 is not fastboot, I would like to understand how to flash It and I'd like an help from you. I'd like to UPDATE without loosing data or format anything. For what I understood, I have to:

- Unhide magik
- Disable magisk modules and restart
- Copy "xiaomi.eu_multi_HMK40_POCOF3_V13.0.9.0.SKHCNXM_v13-12.zip" on the phone.
- Restart on TWRP...and then?

I saw many many posts and articles but I'm confused on what to do on TWRP without loosing data and without reconfigure phone from scratch.

Also, after this I have to have root access again, suggestion also on this?

Thank you
Boot to twrp, enter your password, click install, locate the ROM.zip click it and install, after that so the same but with magisk.zip (renamed magisk.apk)
 
Boot to twrp, enter your password, click install, locate the ROM.zip click it and install, after that so the same but with magisk.zip (renamed magisk.apk)
Everything is ok, but about TWRP It installed version 3.6.2_12-POCOF3_v6.3_A12 and it is in CHINESE!!!! :) Going to find some image to change language...in any case thank you
 
Everything is ok, but about TWRP It installed version 3.6.2_12-POCOF3_v6.3_A12 and it is in CHINESE!!!! :) Going to find some image to change language...in any case thank you
You can change the language in twrp. When you are in twrp, tap the box in the second column, second to last, then tap the globe and choose your language. If you don't see the globe or other symbols for settings, click on different things in the main screen in until you see it


Edit: here is a guide with pictures
 
Stable has October security patch, while Weekly has November patch. You can't do a dirty flash from that Weekly to Stable unless the security patch is the same or newer.
Based on these, am I right I can flash my Mi 10T Pro from weekly 22.10.26. to MIUI 13.0.7.0 stable? Both versions have november security patch. Will not be necessary a factory reset after it?
 
Hi. I've a poco f2 pro with the latest version of xiaomi.eu rom. Every day at night around 22-23h a new notification appears from security but empty (see pic attached). Has anyone seen that too?
 

Attachments

  • Screenshot_2022-11-24-23-19-57-409-edit_com.miui.home.jpg
    Screenshot_2022-11-24-23-19-57-409-edit_com.miui.home.jpg
    55.1 KB · Views: 197
Based on these, am I right I can flash my Mi 10T Pro from weekly 22.10.26. to MIUI 13.0.7.0 stable? Both versions have november security patch. Will not be necessary a factory reset after it?
It should work without format data with the same security patch.
 
  • Like
Reactions: Baitsee
Hi, I am using 12s Pro with MIUI 13.0.18 stable. can I ask why my Mi Smart Hub didn't work? When I click "Mi Smart Hub", then click "Agree", the screen becomes blur and no response.
 
Hi, I am using 12s Pro with MIUI 13.0.18 stable. can I ask why my Mi Smart Hub didn't work? When I click "Mi Smart Hub", then click "Agree", the screen becomes blur and no response.
Should already be fixed for next release.
 
Hi, I have Redmi Note 9s and decided to unlock the boot loader and root it. since unlocking boot loader is going to wipe everything I thought about installing this ROM. but before that I have a few questions:
1. currently I'm on official MIUI 12.5 with android 11. should I update to official MIUI 13 with android 12 before flashing this Rom?
2. there are 2 Orange Fox recovery for my phone FBEv1 and FBEv2. which one should I install. or should I install an old version because my current android is 11 and update the recovery after flashing this ROM?
3. can I flash official MIUI in case I didn't like this ROM without bricking my phone?
 
i tried to install a new rom from xiaomi.eu my xiaomi note 9 nfc codename lime, merlinnfc, using the app XiaomiTool V2 when the app install de twrp and try to install the rom, the app says "adb execution exception waiting device status recovery, got sideload" i put the phone in recovery mode but always the app reload the recovery mode and show me the fail.
 
i tried to install a new rom from xiaomi.eu my xiaomi note 9 nfc codename lime, merlinnfc, using the app XiaomiTool V2 when the app install de twrp and try to install the rom, the app says "adb execution exception waiting device status recovery, got sideload" i put the phone in recovery mode but always the app reload the recovery mode and show me the fail.
So is it lime, or merlinnfc? Not the same thing.
 
  • Like
Reactions: reinaldodperezt
using XiaomiTool V2 and I connect the phone to the pc says merlinnfc,

But the codename lime appears in the list from the post
Then you need to do some homework.
merlinnfc is the codename for the Global model of Redmi Note 9 (4G) which is a MediaTek SoC device, and the Chinese model is Redmi 10X 4G.
lime is the codename for the Chinese model of Redmi Note 9 (4G), which is a Snapdragon SoC device, and the global model is Redmi 9T.
We don't have any ROMs for your device.
 
  • Like
Reactions: reinaldodperezt
Then you need to do some homework.
merlinnfc is the codename for the Global model of Redmi Note 9 (4G) which is a MediaTek SoC device, and the Chinese model is Redmi 10X 4G.
lime is the codename for the Chinese model of Redmi Note 9 (4G), which is a Snapdragon SoC device, and the global model is Redmi 9T.
We don't have any ROMs for your device.
:emoji_disappointed_relieved: thanks for your time to reply bro :emoji_thumbsup:
 
Starting of now (and already included with HMNote10Pro_V13.0.15.0.SKFMIXM), our new extended power menu is being pushed to new ROMs.
You can also opt to use "Legacy power menu" if you prefer.
Previews:
Hi @Igor Eisberg , I just updated my Alioth Poco F3 to V13.0.9.0.SKHCNXM and there is only one option: "Extended power menu". The Legacy one is not there.

Also, when I turn on the extended power menu, the legacy menu shows up (according to the videos that you linked).

This is not a complaint and I am not looking for a fix, just some data that you and the developers might want to know. Thanks for all your work and efforts :)
 
Hi @Igor Eisberg , I just updated my Alioth Poco F3 to V13.0.9.0.SKHCNXM and there is only one option: "Extended power menu". The Legacy one is not there.

Also, when I turn on the extended power menu, the legacy menu shows up (according to the videos that you linked).

This is not a complaint and I am not looking for a fix, just some data that you and the developers might want to know. Thanks for all your work and efforts :)
It will be included in next release... HMNote10Pro_V13.0.15.0.SKFMIXM is first to have it and it is latest uploaded ROM.
 
I experienced something weird, when i am on a call with my bluetooth headphones, i am able to hear myself and the sounds i do from the headphones.
I am using the Xiaomi 11T Pro
 
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
41K
Replies
51
Views
36K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
38K
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
32K