hi i've updated my mi 10pro from V13.0.3.0.SJACNXM to V13.0.4.0.SJACNXM and i see a huge battery drain with hight temps.. is it possible to downgrade without formatting back to V13.0.3.0.SJACNXM?? or resolve this problem?
MIUI 13 MIUI 13 STABLE RELEASE
- Thread starter ingbrzy
- Start date
- Status
maravilha00
Members
- Oct 11, 2021
- 56
- 20
I remembered you because meanwhile I found out that YES you can switch off the video stabilization. You have to go into Pro Mode, select video instead of foto.Flashed Mi 11 Ultra from China ROM (miui 13) to Xiaomi.eu (miui 13 stable).
Comparing between the China ROM and the stable .EU version:
The positives:
1) Notifications without delay (China ROM had delays of several hours)
The cons:
1) 4k 60fps video mode has stutter in first couple of seconds. (none on the China ROM)
2) Video Stabilization option is no more - it's always on
3) Video stabilization is pretty bad (was much better on the China ROM)
4) 4k 60fps video mode has a noticeable delay/optimisation/correction/slide when panning the camera and then stopping it, the camera carries on sliding until it stops by itself - it is as though the stabilisation is working to correct itself but it is noticeable and bad. (This was not the case with the China ROM)
Mi 11 Ultra stabilization issue.mp4
drive.google.com
i would revert back to the China ROM if i could but i have an issue. My China ROM came with MIUI 12.5..., i then updated it to MIUI 13. Then i flashed it to the .EU rom. Now i am not sure which China ROM i should go back to if i want to enable the lock on Bootloader.
once in video Pro Mode open the definitions where you will find the button "image stabilization" on/off. basically that's the better option if you use a handheld gimbal! it should avoid your mentioned stutter
. Hope that's useful for you!I have xiaomi 12 pro and when update to new V13.0.33.0.SLBCNXM
when receive sms i can not hear the sound notification
is it a bug ??
if not ...
how can to fix this????
I made sure of ( settings -apps-manage apps-messaging- notifications- messages-sound - and applied the sound)
need help please
when receive sms i can not hear the sound notification
is it a bug ??
if not ...
how can to fix this????
I made sure of ( settings -apps-manage apps-messaging- notifications- messages-sound - and applied the sound)
need help please
thank you too much for fast reply
i can not found any option in main SMS app to change the sound notification
but i tried truecaller app and made it as a default app and tried to change the SMS sound notification and the same results i cant hear it
best regards
fantap
Uninstall unnecessary third party app to edit notification sounds.
Erase SMS app data. (SMS will not be deleted).
Set the system sound for SMS by video.
Restart the phone.
Thank you too much. Solved. And works fine now
Best regards
julesmctrainspotter
Members
- Jan 2, 2022
- 28
- 15
I just bought on eBay an Mi10 Ultra, the top one with 16 GB RAM and 512 GB ROM. It was on a MIUI 13 weekly ROM. On receipt I immediately turned it on into fastboot mode and flashed the latest MIUI 13 stable ROM. When checking in My Device I saw a small vertical line of dead pixels on the middle lower left running from the CPU info to the Android Version (photo attached). The seller had the phone in Dark Mode and you cannot see the dead pixels. But he said that they were not there when he was using the phone and tried to blame it on the stable ROM flashing, which I think is nonsense? Any comments/advice appreciated, I reset the phone to see if that did anything, but no. This top model is very difficult to find in the UK so I will keep it (and for £400 was reasonably priced), but those pesky pixels are annoying. I just switched to Dark Mode and so can't see them.
Attachments
Last edited:
Mrgee
Members
- Dec 7, 2019
- 29
- 15
gogocar62
XM12 Tester
- Apr 22, 2021
- 4,944
- 322
Because you're in MIUI 13 thread. (For Redmi Note 8 there is no MIUI 13)
You have to go to MIUI 12 thread
xiaomi.eu
You have to go to MIUI 12 thread
MIUI 12.0 - MIUI 12.0/12.1/12.2/12.5 STABLE RELEASE
STABLE RELEASE RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of...
xiaomi.eu
Andreasgbr
Members
- May 30, 2022
- 104
- 40
Okay, I forgor, so sorry in advance. I recently got the Poco F4 GT. It still has stock rom on it and I still need to unlock the bootloader.
Can I flash EU over it? Like an update? Or do I need to do a clean flash?
Can I flash EU over it? Like an update? Or do I need to do a clean flash?
you mean QUALCOMM drivers
the funny thing is that miflash does recognize my phone on fastboot check the photo
but i cant flash EU rom for mi 11 ultra, when i press the BAT file first installation
Attachments
Dead pixels aren't supposed to be visible on screenshots, because the screenshot copies the pixels commanded by the GPU and video drivers, it captures the information before it reaches the display. It does not capture the physical state of the pixels from the display. Theoretically you can even capture a clear screenshot with a broken display or even without any display at all
Your problem may still be hardware related, but I doubt that it is dead pixels. Maybe wires, pins, something between the screen layers, etc, but may as well be a software issue.
Last edited:
LittleWhole
Members
- Apr 30, 2020
- 29
- 15
Fastbooting this ROM and using the update script (not the first install script) will keep all my data totally intact and functional and all my apps and etc. will still be there, right?
gogocar62
XM12 Tester
- Apr 22, 2021
- 4,944
- 322
Yes. If you use the script - fastboot_update_rom - your data will be intact (preserved).
katerpanne
Members
- Apr 19, 2014
- 3,557
- 332
but remember...
Which is the appropriate *.bat file you have to execute
- if you install the xiaomi.eu rom for the first time
- if you change from weekly to stable (recommended)
- if you change from stable to weekly (recommended)
- you will loose your data -> make a backup
windows_fastboot_first_install_with_data_format.bat
- if you update from weekly to weekly
- if you update from stable to stable
- you will not loose your data
windows_fastboot_update_rom.bat
julesmctrainspotter
Members
- Jan 2, 2022
- 28
- 15
I took a photo of the affected area on a camera phone, it was not a screenshot. Many thanks for your reply though.
- Status
