HyperOS 2.0 HyperOS 2.0 STABLE RELEASE


My PC doesn't recognize the phone (Xiaomi 12). I installed everything and I allowed everything. The PC recognizes older xiaomi with android 11 or 13 (miui) but the Xiaomi 12 doesn't.
Maybe you don't have the Fastboot USB drivers installed on your PC
 
Last edited:
I did a clean install on the Xiaomi 12s Pro, everything is great apart from 'Android System' consuming the most battery. Has anyone else encountered this, or know how this can be resolved?

I decided to wipe the data and do a clean install using fastboot, as the Android System battery drain was present when I initially did a fastboot update from Miui 14, hence I thought a full wipe and clean install would resolve the issue.
 

Attachments

  • 1000000059.jpg
    1000000059.jpg
    281.9 KB · Views: 209
I did a clean install on the Xiaomi 12s Pro, everything is great apart from 'Android System' consuming the most battery. Has anyone else encountered this, or know how this can be resolved?

I decided to wipe the data and do a clean install using fastboot, as the Android System battery drain was present when I initially did a fastboot update from Miui 14, hence I thought a full wipe and clean install would resolve the issue.
I already posted the same "problem" on my 12pro
 
Hello,
does the PC make a sound when the USB cable is plugged in?
Is data transfer activated? Everything works fine for me.
USB.jpg
 
  • Like
Reactions: Eclipse1991
Don't mess around with the developer options if you don't know what you're doing.
Just click on the BLUE USB symbol in the top left of the home screen, or drag it down, then a window will appear with the selection: Tap for more USB options, then select data transfer.
Done
 
  • Like
Reactions: ToneLa
I set the data transfer in developer option, but dont pop up this window.
Perhaps you have muted the notification or some such.
Dev options is not how you do it on the fly. It never has been.

That would destroy the different options on offer. Sometimes I want my phone to be browsable in Windows or Mac, that's a benefit of this being an option you make each and every time

On Usb connection the notification bar gives options: swipe down and choose data transferv

Do NOT blame the rom if you don't see this - it's on by default, it's Android built in.

Try it again and if you still don't see it change the notification settings you changed back or, I guess, format data and start again.

If you're not 101% what you're doing DO NOT do things to your phone. These are thousand dollar+ devices in some cases.

----

I bought a drawer unit this weekend. The instructions, relatively simple as they are, beg you to read them before starting.

I would say this goes double for your thousand dollar devices. Hey, it's your own choice.
 
  • Like
Reactions: hansi
Hello everyone, I recently updated my Xiaomi 13 Pro 512GB (Global Version) to HyperOS version 2.0.3.0 via Windows batch, but I'm experiencing battery drain issues. I would like to try updating further to version 2.0.100, but I can't find the links, Could someone share it here please? Thx (P.S: I'm not sure if I can start the OTA update that I see from: settings-> my device. I see that it says Hyperos 2.0.3.0 Stable by xiaomi.eu)
 
Last edited:
After updating to hyperos 2.0.1.0 the phone keeps rebooting. It's a pain as I don't want to downgrade and lose data. garnet from version 1.0.1.16.

As long as the display is on, nothing happens. If the display turns off, it cannot be turned on again and after a few seconds the device restarts

Edit: sorry, my mistake. I flashed the wrong modem fix for my phone. A14 instead of A15
After flashing A15 the problem seems to be solved.
 
Last edited:
  • Like
Reactions: midaspt and ToneLa
Hello everyone, I recently updated my Xiaomi 13 Pro 512GB (Global Version) to HyperOS version 2.0.3.0 via Windows batch, but I'm experiencing battery drain issues. I would like to try updating further to version 2.0.100, but I can't find the links, Could someone share it here please? Thx (P.S: I'm not sure if I can start the OTA update that I see from: settings-> my device. I see that it says Hyperos 2.0.3.0 Stable by xiaomi.eu)
Here you are


Sent from my 2210132G using Tapatalk
 
  • Like
Reactions: ToneLa and leostor
hi
when update and flashed twrp-3.7.1_12-v9.0_A15-zeus-skkk.img in my mi12 pro by
Advanced -> Install Recovery Ramdisk
The performance has become not smooth and there is a slight delay in the response when pressing any button on recovery mod. Please advise this problem and its solution.
However, this does not affect the phone's performance in normal operating mode
In my Xiaomi 12 pro, I had the same problem with TWRP.
After gaining help, I understood that I should use the boot and not recovery version of TWRP.
Download the file [boot] 3.7.1_12-mi12pro_v9.0_a15-zeus-skkk_1998d660.zip, unzip it, then run this command via terminal:
Code:
fastboot boot [BOOT]3.7.1_12-Mi12Pro_v9.0_A15-zeus-skkk.img
After installation, your device will be restarted on TWRP, so go to 'Advanced > Flash Current Twrp'
 
Hi,

is Android Auto working after upgrade to OS2.0.2.0.VLCCNXM ??? On my Xiaomi 12 after upgrade to HyperOS 2.0 AA will not launch, it crashes immediately :-(

thanx
 

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
50K
Replies
51
Views
61K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
88K
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
40K