HyperOS 2.0 HyperOS 2.0 STABLE RELEASE


My device is xiaomi 13 ultra, currently under hyperos 1.0.17 and TWRP 15A. i dowanloaded lateset 2.0.100 ROM through updater and soirceforge, but both files failed to pass both digest verification and zip signature verification.

Actuall i met this problem from 1.0.20 and 2.0.3, so i stayed at 1.0.17. For test purpose, i can still re-install 1.0.17succesuflly, it passed digest and zip signature verification without issue.

Please advise should I skip both digest and zip signature verification? Thanks.
 

Attachments

  • received_1315531166125312.jpeg
    received_1315531166125312.jpeg
    173.4 KB · Views: 74
Just dirty flashed OS2.0.100.0.VMBCNXM on my nuwa, unrooted and deleted magisk, so far the battery is the same as usual, which is actually commendable for an used device with 400 something battery cycles... Also the versioning number is different now..? In line with Xiaomis Hyperos OS2 beta apparently...
xiaomitime.com

HyperOS 2.1 Beta update released for Xiaomi 13 series - XiaomiTime

On January 17, Xiaomi announced the rollout of the official HyperOS 2 internal beta for the Xiaomi 13 series. This update is only available to users with the
xiaomitime.com xiaomitime.com

Is this a beta?
 
Jason Lin said:
My device is xiaomi 13 ultra, currently under hyperos 1.0.17 and TWRP 15A. i dowanloaded lateset 2.0.100 ROM through updater and soirceforge, but both files failed to pass both digest verification and zip signature verification.

Actuall i met this problem from 1.0.20 and 2.0.3, so i stayed at 1.0.17. For test purpose, i can still re-install 1.0.17succesuflly, it passed digest and zip signature verification without issue.

Please advise should I skip both digest and zip signature verification? Thanks.
Click to expand...
Only zip signature verification has to be disabled, our ZIPs are not signed.
As for digest, check that the MD5 hash matches the one on SourceForge.
 
Hello,

I am in Os 2.0.3.0, I want to update to Os 2.0.100.0, I do the download, but when it restarts in Twrp it does not ask me for the password and the phone memory is in Omb (no access to files). Do you know where the problem comes from?

Thank you, greetings.

Julio
 
bpjulio7 said:
Hello,

I am in Os 2.0.3.0, I want to update to Os 2.0.100.0, I do the download, but when it restarts in Twrp it does not ask me for the password and the phone memory is in Omb (no access to files). Do you know where the problem comes from?

Thank you, greetings.

Julio
Click to expand...
Your TWRP is outdated. Flash newer recovery.
 
AlexvdHorst said:
I just got this OTA Update bit Xiaomi 13Pro Nuwa OS2.0.100.0.VMBCNXM
Is this Xiaomi EU from or China?

xiaomitime.com

HyperOS 2.1 Beta update released for Xiaomi 13 series - XiaomiTime

On January 17, Xiaomi announced the rollout of the official HyperOS 2 internal beta for the Xiaomi 13 series. This update is only available to users with the
xiaomitime.com xiaomitime.com
Click to expand...
Updated Nuwa and works like a charm for me. Happy with the icon grid change. Although i also hope for 5x7 ☺️
Thanks a lot devs
 
Last edited:
  • Like
Reactions: Ramin Majidi and Cedric42
I previously asked if anyone with a POCO F6 is experiencing frequent freezes followed by reboots. For those with the same problem, it was caused by the fact that every time I have reset the phone, I restored apps using the Google Backup. I previously had a Poco F3 and most likely Google Backup overwrote some stuff from the factory apps (like the launcher) and caused crashes.

Now I can happily say all I had to do was do a reset and skip reinstalling the apps from a backup. Works very well.
 
@aerox_kid You could have find out by using the search function.
For updating:
TWRP > Install > Install image > Choose file > Select partition Recovery > confirm to flash > Reboot system or recovery
 
darki said:
@aerox_kid You could have find out by using the search function.
For updating:
TWRP > Install > Install image > Choose file > Select partition Recovery > confirm to flash > Reboot system or recovery
Click to expand...
I can't find the file when i choose install image

Enviado do meu 2210132G através do Tapatalk
 
Flash it in fastboot mode the same way you already installed it.
fastboot flash recovery_ab twrp.img(cmd)
or
./fastboot flash recovery_ab twrp.img(Power Shell)
then
./fastboot reboot recovery (Power Shell)
fastboot reboot recovery(cmd)
 
Updated from Xiaomi eu 1.0.24.4.8 DEV NUWA using the fastboot method to the latest hyperos 2 and everything working great. Thanks for the updates
 
Hi, I tried to update my NUWA to `OS2.0.100.0.VMBCNXM` but first the system did not boot for more than 20 min and then there was the previously mentioned problem with TWRP. I updated recovery and now I can mount all partitions using the password but after reflashing the new rom it still does not boot (once I got reboot to TWRP). Is this version somehow defective or does it require some extra tweaks to actually make it run? I was able to revert the system to 2.0.3 and now it can boot normally. I would appreciate some suggestions.
 
Xiaomi phone 13, updated to the latest 2.0.100, everything has been working great for 24 hours!
Many thanks to the developers!
 
fjp666 said:
After upgrading to HyperOS 2 on my Xiaomi 14, I’m having trouble connecting to my Xiaomi Watch 2 (Wear OS 4). Any ideas? Also, no FastPair pop-ups show up at all.


=====
Doesn’t look like it’s an EU version thing—I’ve seen similar complaints on Chinese forums. Looks like we’ll just have to wait for an update.
Click to expand...
Did you manage to get the watch set up? I also have problems getting my watch 2 pro set up on my Poco F5 pro after installing HyperOS 2. The App always stops at 12% into the pairing assistent. Although it works on my old Mi 9 with crDroid 10 and also did work on HyperOS 1.
 
fjp666 said:
After upgrading to HyperOS 2 on my Xiaomi 14, I’m having trouble connecting to my Xiaomi Watch 2 (Wear OS 4). Any ideas? Also, no FastPair pop-ups show up at all.


=====
Doesn’t look like it’s an EU version thing—I’ve seen similar complaints on Chinese forums. Looks like we’ll just have to wait for an update.
Click to expand...
cyablo said:
Did you manage to get the watch set up? I also have problems getting my watch 2 pro set up on my Poco F5 pro after installing HyperOS 2. The App always stops at 12% into the pairing assistent. Although it works on my old Mi 9 with crDroid 10 and also did work on HyperOS 1.
Click to expand...
It's a Wear OS 4 thing I guess. As soon as I upgrade my Xiaomi Watch 2 Pro it just refused to pair. From what I read it doesn't allow pairing global watch with China Roms

Sent from my 2210132G using Tapatalk
 
stathis95194 said:
It's a Wear OS 4 thing I guess. As soon as I upgrade my Xiaomi Watch 2 Pro it just refused to pair. From what I read it doesn't allow pairing global watch with China Roms

Sent from my 2210132G using Tapatalk
Click to expand...
Sh*t, that would be a dealbreaker for xiaomi.eu ROM's for me, if there will be no workaround.
 
You must log in or register to reply here.

Similar threads

ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
377K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
45K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
49K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
61K
HyperOS
KGVER
KGVER
ingbrzy
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
36K
HyperOS
emre_66
E
Top Bottom
Back