HyperOS 1.0 HyperOS 1.0 STABLE RELEASE


dakky said:
Just to say how I solved the GPay issue: on my Ishtar (CN 13 Ultra), GPay stopped working but... updating GPay module and then just uninstalling the updates to Play store and Services fixed everything. Just reboot after uninstalling updates and then wait for phone to get updates again (when downloads stop). No need to uninstall wallet and other stuff.
Click to expand...
brilliant, thanks, work perfectly on my CN 13 Ultra too, no need to change much
 
  • Like
Reactions: banie01, DRLaptop and Mario1944
stkrup said:
brilliant, thanks, work perfectly on my CN 13 Ultra too, no need to change much
Click to expand...
I'm struggling with Google pay since the 26/9 Xiaomi EU module.
I'm on a Poco F5 and running HyperOS 1.0.7.0.
I've done the steps of uninstall updates to Playstore & services. Updated the xiaomi.eu module and then rebooted but Google Wallet won't launch, I get a pop up asking "choose account to use with Google pay" image below.
Any ideas on next troubleshooting steps?
 

Attachments

  • 1000002196.jpg
    1000002196.jpg
    320.2 KB · Views: 293
Last edited by a moderator:
banie01 said:
I'm struggling with Google pay since the 26/9 Xiaomi EU module.
I'm on a Poco F5 and running HyperOS 1.0.7.0.
I've done the steps of uninstall updates to Playstore & services. Updated the xiaomi.eu module and then rebooted but Google Wallet won't launch, I get a pop up asking "choose account to use with Google pay" image below.
Any ideas on next troubleshooting steps?
View attachment 54090
Click to expand...
Settings-privacy-privacy dashboard-show system-SMS
Choose Google Play Services and allow

Sent from my 2210132G using Tapatalk
 
  • Like
Reactions: banie01
kekec01 said:
Hi all. Got Xiaomi 13 Pro CN Nuwa from Trading.... with latest stable MIUI. I want to fastboot install latest stable HyperOS. I enabled OEM unlocking, USB debuging, the phone is unlocked. I downloaded The Rom, unpacked it. Put the phone in Fastboot, connect it with original cable to pc, activate the first script for windows first time install and in the opened window it states "waiting for the device". I installed drivers, platform tools, minimal adb usb drivers, 15 second adb, restart the pc several times and it is the same. Previously I had Mi 11 Pro CN, Mi 12 Pro Global and I never had issues. This is my new Xiaomi after a while, maybe I am missing, forget something. Any advice?

Apparently missing drivers. Install adb on "C", do the Path, install phone driver with driver booster, restart the PC and now is installing. Cheers!!
Click to expand...
Only Chinese users can unlock the bootloader on a CN phone. Only phones with a CE mark can be unlocked by an EU citizen. This has only been the case since the end of 2023, but it is common knowledge. From your post it can be seen that you bought the device from Trading Senshen, so it is a pure CN device for the Chinese market.
 
  • Like
Reactions: Iain_B
Do i always have to install the Xiaomi.eu GPay Module everytime i do an update?
Like 1.0.3.0 to 1.0.4.0 or only the first time i do a major update?
 
There are some issues with the NUWA September 20 firmware. The gallery app is loading the cloud infinitely, and the authy app is showing issues with device integrity.
 
mimimimi said:
Do i always have to install the Xiaomi.eu GPay Module everytime i do an update?
Like 1.0.3.0 to 1.0.4.0 or only the first time i do a major update?
Click to expand...
Every time the GPay module is updated (the ROM update contains the most current version at time of release).
 
  • Like
Reactions: mimimimi
System launcher on latest LISA 1.0.5.0 keeps crashing, unable to use phone, unable to connect to wifi :( Also not sure since which version, the wifi on LISA unable to connect to wifi everytime the phone reboots. Need to reset the wifi everytime reboot the phone.
 
Last edited:
Raymond_123 said:
System launcher on latest LISA 1.0.5.0 keeps crashing, unable to use phone, unable to connect to wifi :( Also not sure since which version, the wifi on LISA unable to connect to wifi everytime the phone reboots. Need to reset the wifi everytime reboot the phone.
Click to expand...
Hi! Same here since updated latest xiaomi.eu Hyper OS Rom 1.0.8. Some System apps always crashes after reboot and no network available either WiFi or 4g/5g. Any solutions?
Is it possible to just flash the previous version 1.0.7 via TWRP or fastboot or is there a special procedure?
 
BlackCanary said:
Only Chinese users can unlock the bootloader on a CN phone. Only phones with a CE mark can be unlocked by an EU citizen. This has only been the case since the end of 2023, but it is common knowledge. From your post it can be seen that you bought the device from Trading Senshen, so it is a pure CN device for the Chinese market.
Click to expand...
You didn't read carefully. Phone is already unlocked and the issue was solved by installing missing drivers.
 
deRt0d said:
Hi! Same here since updated latest xiaomi.eu Hyper OS Rom 1.0.8. Some System apps always crashes after reboot and no network available either WiFi or 4g/5g. Any solutions?
Is it possible to just flash the previous version 1.0.7 via TWRP or fastboot or is there a special procedure?
Click to expand...
Did you try this command via ADB ?

adb shell pm compile -a -f --full
adb shell reboot
 
  • Like
Reactions: katerpanne and deRt0d
snoopera said:
feedback , previously was updated manually play store and play service and this did not fixed it, now tryed uninstall updates and update to the latest version on both and fixed it ( even was exact the same versions ), but...... big but... f**k google this resets my wallet and disconnect my wear os watch , so have to setup all again, this is total bullshit from google , why uninstall updates reset them , clear data resets them for sure , but why uninstall updates cleared the data too , there were no warning , no nothing , now have to setup the watch from scratch , which is very time consuming , as google do not allow watch to be paired again to the phone without fully reset first, so keep this in mind... very bad experience for me , had to do it twice before and it's pain in the ass , so keep this in mind if you have wear os device paired with the phone if you need to do it...
Click to expand...
I use Xiaomi watch S3. No such issues. Enjoy
 
Raymond_123 said:
System launcher on latest LISA 1.0.5.0 keeps crashing, unable to use phone, unable to connect to wifi :( Also not sure since which version, the wifi on LISA unable to connect to wifi everytime the phone reboots. Need to reset the wifi everytime reboot the phone.
Click to expand...
Also try my hint which I recommended to @deRt0d .
 
BlackCanary said:
Only Chinese users can unlock the bootloader on a CN phone. Only phones with a CE mark can be unlocked by an EU citizen. This has only been the case since the end of 2023, but it is common knowledge. From your post it can be seen that you bought the device from Trading Senshen, so it is a pure CN device for the Chinese market.
Click to expand...
Thank You for Your answer. I bought a revocation device from Tradingshenzhen which was allready unlocked and with latest MIUI installed (on my request). And since I have Xiaomi 14 Global on HyperOS it seemed smoother in work (I know it has a new gen SD) so I decided to flash HyperOS on 13 Pro as well. I just had little trouble until I installed proper drivers. However, I didn´t know the information that only chinese users can unlock chinese devices and european users CE marked devices. If that is true, and I don´t have the reason not to believe You, this is very usefull info for my next purchases.
 
TomSak said:
Question
Poco f6 pro that it says global rom with this code name: UNKMIXM
It supports call recording?
Thanks for your help
Click to expand...
Poco F6 Pro (vermeer / UNKCNXM) xiaomi.eu rom is based on China. The rom you mentioned is a global rom and does not support call recording
 
Hello

My wife installed my old Xiaomi 12 with Xiaomi.eu_CUPID_OS1.0.8.0.
It doesn't have many apps installed and I do a deep cleaning every now and then. Unfortunately, sometimes your Xiaomi is slow and hangs when opening some apps like camera, settings, etc. Do you have any ideas what I could try besides buying her a new cell phone?
I used to always delete the Davlik cache after an update. Are you still doing that today? I would like to attack her cell phone (for self-protection :D) as little as possible.
 
You must log in or register to reply here.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
138
Views
45K
HyperOS
xMarvin732
X
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
265K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
41K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
37K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
41K
HyperOS
KGVER
KGVER
Top Bottom
Back