MIUI 10 9.1.1/2/3
- Thread starter ingbrzy
- Start date
- Status
Thanks, but thats the basic way, i already tried and this didnt work too me becuase i had to install the china stock first otherwise i wasnt able to install twrp :/
I will try it now and this time format data
- Oct 6, 2016
- 9,881
- 322
"SIMs info report" where? Where are you reading this information?
Not possible.
It is FORMAT, done from TWRP, you need to acknowledge the action by typing "yes".Yeah, I wipe the data,dalvik and cache before installing. What could i have done wrong else ? I am trying it again and again but cant get it work
This will re-format your storage, and it will remove the encryption from the original Chinese ROM, and then you need to download the xiaomi.eu ROM and flash it
Press 5 times on settings \ my device \ internal memory
Or
*#*#4636#*#*
The default mode in all miui releases when set to "LTE preferred" seems to be configured for China. This is causing additional battery drain and signal loss during lte>3g handover
The default setting used to be different in earlier miui versions (global / td-scdma)
See also: https://xiaomi.eu/community/threads...by-of-mi8-caused-by-td-scdma-searching.46054/
This WILL NOT cause signal loss during handovers.
The handover target selections are controlled by the network, specifically the MME and RNC.
Also the cell selection and reselection process are also network defined.
I write samw before.
On some phone i have td-scdma/lte and work normall all bands in europe.
Some have auto prc etc its not make a differences for us
Last edited:
Tui up lên phát bị treo luôn, nhưng chắc là do ko wipe systemUp bình thường từ 8.12.27 lên có bình thường ko bác ? Có bị treo hay bay mất twrp ko bác
Mình cũng bị ý chang. Mình ko wipe gì cả. Có khi nào wipe thì nó sẽ ko bị chăng?? Ai thử chưa, cho biết với
Black screen after unlock in redmi 5, it happen when i update 9.1.2, i want go back 9.1.1 but i can't find it
I finally got it working. I had to change my pc to flash the china stock rom with miflash and then i was able to flash twrp. I chose the 1217 and installed the rom after formatting the data, thanks to everyone. Hope i dont find a lots of bugs now
You have to choose FORMAT!Yeah, I wipe the data,dalvik and cache before installing. What could i have done wrong else ? I am trying it again and again but cant get it work
Sent from my MI 8
In the case of the MI8 it does appear otherwise. I guess there's a baseband issue that's amplified by the network mode setting.
I'm aware that the handover is largely controlled by the mobile provider.
I ran a little test today to find out if other devices handle it better and it does appear to be so. Mido battery drain with LTE/WCDMA and LTE/TD-SCDMA/UMTS was exactly the same.
But the cell signal history wasn't...
Redmi Note 4X, Xiaomi.eu 9.5, 70km Highway drive with Waze and internet music stream running, fixed display brightness. Same route in both tests, just opposite directions - hence me flipping 2nd signal history in the following screenshot:
I ran a similiar test on my MI 8 a week ago and there were massive differences in battery drain and signal history...like I said I think MI 8 has a baseband issue. Cell standby drain seems to be unusually high.
MiMix2 [6/128GB], Weekly ROM 9.1.3
Bug with ANT+ devices.
ANT+ Service closes unexpectedly during "Find Device".
All ANT+ Services installed and with all permissions.
I have Bug report, but cannot attach files for some reason "Choose File" button on the "attach files" page does nothing (F-Secure SAFE browser) or only allows camera images (default MIUI Browser), not zip files.
Bug with ANT+ devices.
ANT+ Service closes unexpectedly during "Find Device".
All ANT+ Services installed and with all permissions.
I have Bug report, but cannot attach files for some reason "Choose File" button on the "attach files" page does nothing (F-Secure SAFE browser) or only allows camera images (default MIUI Browser), not zip files.
In your test for Redmond Note 4X I would caution against comparing the "out" and "back" routes, despite driving the same physical route.In the case of the MI8 it does appear otherwise. I guess there's a baseband issue that's amplified by the network mode setting.
I'm aware that the handover is largely controlled by the mobile provider.
I ran a little test today to find out if other devices handle it better and it does appear to be so. Mido battery drain with LTE/WCDMA and LTE/TD-SCDMA/UMTS was exactly the same.
But the cell signal history wasn't...
Redmi Note 4X, Xiaomi.eu 9.5, 70km Highway drive with Waze and internet music stream running, fixed display brightness. Same route in both tests, just opposite directions - hence me flipping 2nd signal history in the following screenshot:
I ran a similiar test on my MI 8 a week ago and there were massive differences in battery drain and signal history...like I said I think MI 8 has a baseband issue. Cell standby drain seems to be unusually high.
During my work in RF & RAN Optimisation, I see many situations like this caused by incorrect neighbour definitions, particularly with UMTS and it's SIB11 list limitations, and the H/O priority settings in the neighbour definitions.
Also I do not know the source of the cell signal history data - I assume where there is "grey" bar, the phone had no signal at all? Could you confirm that with a "Network Signal Guru" trace file?
There may well be a fundamental issue with the baseband for the Mi8, as the only time the network search list should look to the basic phone settings is when the phone is initially powered up (after manufacturing or a full "clean" flash.
Yeah I'll try to run another Mi 8 test with some proper cell monitor / logging software when I have the time.
Regarding signal history in the Android battery stats:
The colors represent signal strength.
Source: https://android.stackexchange.com/q...gnal-strength-colors-in-battery-usage-screens
Last edited:
I am not expert, but better network signal = better battery life always. Perhaps is not that perceptible. You can try changing between options and check the signal strength (minor number better)
Ok let's assume we found the best option for our Network.
How can we save it because after reboot it reverts back to pre defined option.
How can we save it because after reboot it reverts back to pre defined option.
Stronger signal does not necessarily mean better battery life - in many areas with "strong signal" there is often high interference (both uplink and downlink), which has many negative consequences for device battery usage.
Thank you, this is the first time flashing the kernel, looks like it has a lot of good things on it. Perfect combo. Love it.
@GreasyMonkey1960
Network signal monitor doesn't work without root. :/
I could provide a netmonster cell log?
There's mods that require root or we modify the system apk in Rom.
Network signal monitor doesn't work without root. :/
I could provide a netmonster cell log?
We can't.
There's mods that require root or we modify the system apk in Rom.
Additional Settings/Backup & Reset/Network settings reset
Does this produce the same result as a full (clean) flash?
- Status
