deepblue2000
Members
- 14 Apr 2017
- 947
- 182
MIUI 10 8.12.6 v2
- Thread starter ingbrzy
- Start date
- Status
deepblue2000
Members
- 14 Apr 2017
- 947
- 182
SUSPEND mean no body knows when it available except Xiaomi Team it self.
Sent from my MI 8 using Tapatalk
Poco F1 latest eu rom. ;
Google play sign button after black screen issue.
Not sign google play account !
https://hizliresim.com/dvn1G7
https://hizliresim.com/4jLEGJ
Google play sign button after black screen issue.
Not sign google play account !
https://hizliresim.com/dvn1G7
https://hizliresim.com/4jLEGJ
zSyntex
Members
- 20 Feb 2018
- 41
- 20
For Mi Max 3 Users ....
Before update i was on 8.10.25. The most runs well. One bug i have was known in OREO. SD Card shows sometimes 0Kb files. The other was the delay when i close a app and wents back to homescreen. So i plan to go to Pie. Sadly there´s no nitrogen TWRP version which supports Pie. I ask here sometimes if a known version exists. So the only way - seems - are the fastboot way. This i didn´t want, so i wait. Meanwhile the users here have reported for many bugs in the first version so i wait. And the most posters here tells to update with a clean install. This means everything must be new installed. I have no pleasure for that. So i tried a dirty install : At first i found a custom TWRP Version with Pie Support. I forget on which place - means somewhere on the XDA forums. The name : MiMax3-twrp-3.2.3-2-nitrogen-nijel8.img Try google. I didn´t know if its allowed to post it here. 1 Step i delete useless files and clean cache from the phone. 2. Step i flash this TWRP via fastboot to phone. 3. Step i copy the 8.12.6 v2 zip to sdcard. 4.Step i boot the phone into TWRP, wipe Cache/dalvik and install the rom without reboot. The time to flash was very quick - i stop 4min and a few seconds. After install reboot. First boot costs 3min 41 sec. Everything seems ok. 5. Step i went again to TWRP and flask Magisk 17.2. As well everything wents good. Phone boots extremely fast under Pie. The delays i discribe are away. The 0kb bug also gone. The Phone is fast, stable and the battery charging/drain is much better than before. The only mistake - the camera2api doesn´t works anymore. Bad. But i remember a post from a user here who offers kindly a patch for enabling Camera2api. The name was Camera_2API_Pie.zip. My respect to this user. Read the posts and you find it here. Flashing this file with TWRP and all works well. So it seems - by me - that a dirty install with TWRP works good. The Bootloader stays unlocked after flash. Also ARB is not active. check with this command - fastboot getvar anti - gives me this result : fastboot getvar anti failed. Means no ARB. Hope this helps all Mi Max 3 Users.
Happy X-mas
Anony
Before update i was on 8.10.25. The most runs well. One bug i have was known in OREO. SD Card shows sometimes 0Kb files. The other was the delay when i close a app and wents back to homescreen. So i plan to go to Pie. Sadly there´s no nitrogen TWRP version which supports Pie. I ask here sometimes if a known version exists. So the only way - seems - are the fastboot way. This i didn´t want, so i wait. Meanwhile the users here have reported for many bugs in the first version so i wait. And the most posters here tells to update with a clean install. This means everything must be new installed. I have no pleasure for that. So i tried a dirty install : At first i found a custom TWRP Version with Pie Support. I forget on which place - means somewhere on the XDA forums. The name : MiMax3-twrp-3.2.3-2-nitrogen-nijel8.img Try google. I didn´t know if its allowed to post it here. 1 Step i delete useless files and clean cache from the phone. 2. Step i flash this TWRP via fastboot to phone. 3. Step i copy the 8.12.6 v2 zip to sdcard. 4.Step i boot the phone into TWRP, wipe Cache/dalvik and install the rom without reboot. The time to flash was very quick - i stop 4min and a few seconds. After install reboot. First boot costs 3min 41 sec. Everything seems ok. 5. Step i went again to TWRP and flask Magisk 17.2. As well everything wents good. Phone boots extremely fast under Pie. The delays i discribe are away. The 0kb bug also gone. The Phone is fast, stable and the battery charging/drain is much better than before. The only mistake - the camera2api doesn´t works anymore. Bad. But i remember a post from a user here who offers kindly a patch for enabling Camera2api. The name was Camera_2API_Pie.zip. My respect to this user. Read the posts and you find it here. Flashing this file with TWRP and all works well. So it seems - by me - that a dirty install with TWRP works good. The Bootloader stays unlocked after flash. Also ARB is not active. check with this command - fastboot getvar anti - gives me this result : fastboot getvar anti failed. Means no ARB. Hope this helps all Mi Max 3 Users.
Happy X-mas
Anony
Face unlock isn't working with my phone after updating on Pocophone f1
Nevermind, if face unlock isn't working delete face data and add it against and it work properly
Nevermind, if face unlock isn't working delete face data and add it against and it work properly
Go settings-->search face data--> delete face data-->Add a New one
Sent from my MI 8 using Tapatalk
Sent from my MI 8 using Tapatalk
Blame your network provider. I'm almost at full speed. Less than 2 minutes for downloading ROM.
zSyntex
Members
- 20 Feb 2018
- 41
- 20
Well, "blame yourself" because this files is hosted only on one server, instead of multiple locations of AFH.
It's obvious that a busy server hosted in Canada (so far from Europe) is more slow than our server.
So, please, stop say stupid things.
You are right IT was 1 hour for me to do download
Sent from my MI 8 using Tapatalk
Sent from my MI 8 using Tapatalk
Just installed Ursa version (Mi8 explorer edition) install took less than 4 minutes, so far no probs, face unlock works like never before, slomo video works in 120, 240 and 960 fps
Great job!!!
Now I just have to check the next couple of days if battery drain is gone..
Many many thanks to EU team!!!!
Great job!!!
Now I just have to check the next couple of days if battery drain is gone..
Many many thanks to EU team!!!!
Aybabtu
Members
- 31 Aug 2016
- 388
- 52
Thanks for the update. Install on MI8. First impression, works nice but :
- Still have this problem in messenge app (sms), the contact names don't appears instantly, but shows firs with phone numbers (don't know if i'm clear enough ! ).
- Slow motion in 240 and 960 working but screen is blinking
- Had to reconfigure the face unlock but that's not big deal
....
- Still have this problem in messenge app (sms), the contact names don't appears instantly, but shows firs with phone numbers (don't know if i'm clear enough ! ).
- Slow motion in 240 and 960 working but screen is blinking
- Had to reconfigure the face unlock but that's not big deal
....
- Status
