MULTI 7.8.24


Do you like this MIUI version?


  • Total voters
    338
Status
Not open for further replies.
Aahhh, I'm gonna be crazy!.

I've got a xiaomi mi max pro helium with nougat 8.5.1,
Which twrp i have to install?

Twrp_helium_7 from option 1 in the image? Or twrp 3.x from option 2?

Thanks in advance
b1532c6066c23c71a1aed2153387e880.jpg


Enviado desde mi MI MAX mediante Tapatalk

Here you are: https://eu.dl.twrp.me/helium/twrp-3.1.1-0-helium.img.html
 
Hello.
Have device Xiaomi Mi Max 2, unlocked bootloader, installed TWRP (oxygen), wipe all data and installed the firmware from this topic.
Immediately after reflashing, I noticed that the internal memory is completely empty.
The phone works fine, but the memory is empty; (
There are no system folders. I can not copy anything there.
Please tell me how can I fix the problem?

Thanks!
 
My kenzo rom is xiaomi.eu miui 8.1
What should i do to install this rom? Do i should be install the latest miui 8.6 or not?

Sorry for may bad english. Thanks in advice!
 
My kenzo rom is xiaomi.eu miui 8.1
What should i do to install this rom? Do i should be install the latest miui 8.6 or not?

It would be worth your while to upgrade to MIUI 8.6, to make sure your device is on the latest firmware.

Kenzo MIUI 9 rom is not available yet (middle to late September).

Last available rom was 7.6.(8/10) so that is where you will find the download!
 
Last edited:
Updated today for this rom.

Google don't get showed on startup permissions. So that I can use OK Google. Already Uninstalled rebooted but still not shown.

Using Mi5 pro
8247d2d1dad4ffa713361d547994cf34.jpg
 
Hello,
Mi5c here running 7.8.24, no severe issues so far. Missing minor translation in the search app, it still shows chinese chars under its app version tab (looks like some kind of changelog). Though there's a major issue with TWRP: after booting into recovery the touch is not working at all, not even after a 10+ minutes wait. The workaround is pressing firmly for around 1 second the volume down + power key combo: that quickly restarts TWRP's GUI and touch starts working correctly. Such issue does not happen with 7.7.20 or stable 8.5.4.0, so it might be caused by some driver/kernel changes in MIUI 9. Can any dev take a look into this problem? Also I'de like to know if song/meri TWRP is going to be updated to the latest version, as it is still based on 3.1.0. Anyway, thanks for the amazing work you've done!
 
Xiaomi redmi note 4x
Lates MIUI build
This message appeared just after using dual apps feature
 

Attachments

  • Screenshot_2017-08-29-21-40-19-423_com.miui.securitycore.png
    Screenshot_2017-08-29-21-40-19-423_com.miui.securitycore.png
    143.8 KB · Views: 480
After 2 days of usage, I found out there is an issue with Mi Cloud sync. The notification for syncing is always presented, the phone syncs, but it looks like it can't. Mi4c.

Sent from my Mi-4c using Tapatalk
 
  • Like
Reactions: Loddle
Xiaomi redmi note 4x
Lates MIUI build
This message appeared just after using dual apps feature
I have this too, I don't know what it is but I've pressed back key and dual app works fine so I thinks it is not so important

Device: Mi4S (aqua)
Language: Italian
 
I have this too, I don't know what it is but I've pressed back key and dual app works fine so I thinks it is not so important

Device: Mi4S (aqua)
Language: Italian
That means creating dual apps will be doubled Google services. This is required using dual apps.

If you use dual apps just check in installed apps you have Google services doubled

Sent from my MI 5 using Tapatalk
 
  • Like
Reactions: Mi4CMX
Hello guys. I noticed that by playing a simple card game the battery drains more than the "MIUI 8". it's normal?
 
See in 7.8.31 changelog from MIUI forum : 'Home Screen
Users can set their main Home screen in the editing mode.
Finally I will probably pass to MIUI 9 next Friday

Envoyé de mon MI 4S en utilisant Tapatalk
 
That means creating dual apps will be doubled Google services. This is required using dual apps.

If you use dual apps just check in installed apps you have Google services doubled

Sent from my MI 5 using Tapatalk
I have Google services and Google account manager doubled, thanks for the info

Device: Mi4S (aqua)
Language: Italian
 
I can't enable Install via USB anymore under developer options. When I toggle it, it pops up an allowing message in the bottom for a few seconds and then it is toggled off.

Same for the usb debugging(security settings) option below it (with the anyong 3 popups that require 5 seconds eacht before being able to accept them).

Almost seems like something is blocking it.
 
Last edited:
Hello everyone! First of all, thank you for this ROM. My Mi4c is superfast now, even if I had problems during installation (TWRP showed something like volume failed/full, I can't remember). However, I had a serious issue this morning. The phone had no charge in the battery, so I put it in charge. I was waiting for the MIUI sign to appear but nothing. I pressed the power-on button, but nothing. After a while that the phone had not showed any sign yet, I changed cable (I am not using the original one anymore). Nothing. I connected it to my laptop and waited, nothing. After a while, I press again the power-on button for 10-12 seconds, and the phone finally turns on...showing 59% of battery. Now, I don't think the phone was charging as it was rather cold on the back and there wasn't time to collect 59% of charge. But what I'm noticing now is that the quickcharge behave strangely. It says 69% but also more than 1 hour to complete the charge, which seems too much for me.
I hope it has been an occasional issue, but I wonder if something similar happened to anyone in the forum. Thanks.
 
Mi4c

From security -> Manage shortcut

When you tap as described in the table below you get on the home the action described on the right side of the following table instead of the corresponding action

Deep clean -> Battery usage
Battery usage -> Permissions
Security scan -> Deep clean
no label -> Security scan
 

Attachments

  • Screenshot_2017-08-30-10-44-54-639_com.miui.securitycenter1.png
    Screenshot_2017-08-30-10-44-54-639_com.miui.securitycenter1.png
    92 KB · Views: 500
  • Screenshot_2017-08-30-10-44-10-733_com.miui.securitycenter.png
    Screenshot_2017-08-30-10-44-10-733_com.miui.securitycenter.png
    124.1 KB · Views: 479
  • Like
Reactions: turtlix
I can't enable Install via USB anymore under developer options. When I toggle it, it pops up an allowing message in the bottom for a few seconds and then it is toggled off.

Same for the usb debugging(security settings) option below it (with the anyong 3 popups that require 5 seconds eacht before being able to accept them).

Almost seems like something is blocking it.
I attached Fiddler to my phone and found out that when I try to enable the setting it tries to connect to a miui server

[Fiddler] The connection to 'srv.sec.miui.com' failed. <br />Error: TimedOut (0x274c). <br />System.Net.Sockets.SocketException A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 47.74.139.122:443

Why does it need to connect to a remote server for this?
 
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
Replies
51
Views
45K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
54K