HyperOS 1.0 24.6.10/11


Status
Not open for further replies.

ingbrzy

Xiaomi.eu Project Leader
Staff member
Feb 11, 2012
11,601
322
Status: RELEASED

68747470733a2f2f692e696d6775722e636f6d2f44424566616e712e706e67


RULES WHEN POSTING
1. If a ROM is not published DONT ASK ABOUT ITS ETA
2. If a ROM is not published DONT ASK why!
3. If a ROM is available, download it and use it
4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed
5. If you use any form of abusive or derogatory language to admins or other users you will be BANNED forever!
6. If you quote whole first or second post, your post will be deleted and ignored
7. We do not own all supported devices, so in case of issue, post log to be able fix it
8. Only posts in English language are accepted

Full rules here: https://xiaomi.eu/community/threads/rom-release-thread-rules-final-warning-of-bad-conduct.51332/

DOWNLOAD WEEKLY 24.6.10
https://sourceforge.net/projects/xi...eu/HyperOS-WEEKLY-RELEASES/OS1.0.24.6.10.DEV/

DOWNLOAD WEEKLY 24.6.11 HOUJI, SHENNONG
https://sourceforge.net/projects/xi...eu/HyperOS-WEEKLY-RELEASES/OS1.0.24.6.11.DEV/

devices_weekly_23122702.png


Requirements:
  • Your device's bootloader must be unlocked.
Installing with Fastboot:
  • Download Xiaomi.eu ROM zip file
  • Extract the ROM zip to a new folder
  • Power off your device
  • Boot your device in Fastboot mode (Hold volume down + power buttons)
  • Connect to PC via USB cable
  • Run one of the installation scripts (according to your PC operating system):
    - first_install_with_data_format - with data wipe, if you're flashing Xiaomi.eu ROM for the first time or downgrading.
    - update_rom - without data wipe, if you're updating from an older Xiaomi.eu ROM.
  • Done!
Installing with TWRP:
(TWRP must be installed with Fastboot mode)
  • Download Xiaomi.eu ROM zip file
  • Reboot to TWRP
  • If installing for the first time or downgrading: Wipe -> Format Data
  • Copy the ROM zip file to the internal storage
  • Install -> Select the ROM zip file
  • Reboot to system
  • Done!
Updating via Updater app:
(A Xiaomi.eu ROM and TWRP must already be installed on your device)
  • Download Xiaomi.eu ROM zip file
  • Copy the ROM zip file to the internal storage
  • Updater -> Menu (...) -> Select update package
  • Select the ROM zip file
  • Confirm any dialogs
  • Done!
Translators:
  • Follow XML changes in Source of HyperOS here
  • Our translation guide is here
  • Check for errors in your repo here
Give kudos to your translators. This is a huge group effort and continues to grow bigger!

Language included in our HyperOS 1.0:
Notes:
  • HyperOS Changelog + See CHANGELOG for your language...
  • Our ROMs were approved by official EU distributor ABC Data to not void warranty for devices sold by them!
  • (Of course, officially unlocked BL and no ROOT installed)
Our ROMs features (what's not in Global):
  • Based on China Beta builds
  • 3way reboot menu (in dev settings)
  • HyperOS Contacts and Dialer
  • Removed ads in HyperOS system apps
  • HyperOS Dialer and Messages apps
  • Steps counter in Assistant screen
  • More shortcuts on left lockscreen
  • Wake up gestures for all devices
  • Option to auto-expand first notification
  • Notifications priority settings
  • More edit options in Gallery app
  • Enabled MiDrive in File Explorer
  • Google apps support integrated
  • Removed 5GHz region restrictions
  • Confirm dials from call logs
  • Morning report on alarm at morning
  • More apps supported for AOD notifications
  • More styles for AOD screen
  • Raise to wake gesture
  • AOD notification received animation
  • Tap fingerprint sensor to wake toggle
  • Double tap to lock screen
  • Battery AI scenes
  • Allowed disabling specific system apps
  • Importing theme .mtz from zhuti.xiaomi.com via ThemeManager
  • No useless Chinese bloatware apps
  • More free RAM due to less background processes
  • Mi Video, Mi Music, Mi Browser: No any useless Chinese content and ads
  • No possibility to re-lock bootloader accidentally with flash any xiaomi.eu release
  • Added real 27 languages translation made by Official MIUI Fansites and MIUI Fans
  • Added EU T9 dialer support
  • Added charging sound switch
  • Optimized GPS settings for EU
  • Optimized Battery consumption
  • Optimized RAM consumption
  • Added GSMalphabet into SMS app options
  • SafetyNet passed by default without ROOT (Google Pay)
  • Play Store Certified
  • Deodexed
  • Added automated tasks in Security app
  • Widevine L1 (for supported devices)
  • And more, and more made by our 12 years mods experience.
 
13 Ultra major problem! Not able to do anything once rebooted can't open any apps after install, can't even go though system update to install older rom so having to do via usb stick. On third installation atempt alls ok now (that was very scary as thought id have to format and start afresh)
 
Last edited:
Oh Houji this time while i was flashing with the script, appeared a warning message:
Warning: skip copying super image avb footer due to sparse image.
Don't know why..

Anyway thank you developers!
 
  • Like
Reactions: Kaliban69
Oh Houji this time while i was flashing with the script, appeared a warning message:
Warning: skip copying super image avb footer due to sparse image.
Don't know why..

Anyway thank you developers!
try Diferent ways to get fastboot screen

From google seach ... and other forum .... starts with X .... :)

After discovering this I understood that the FASTBOOT mode which I enter when I reboot the phone pressing Volume Down + Power or if I use the command:

adb reboot bootloader

is working completely DIFFERENTLY than the FASTBOOT mode if I:

Reboot in to the recovery (TWRP / Lineage OS / AOSPA) and after that from the recovery sub menu I Reboot to Fastboot.
 
Oh I forgot to say that that I still receive an a crash that it's something related about turning on the screen while unlocking the device, anyone can confirm that is present to other Houji phone?
PS yes before flash I replaced the modemconfig.img

Thank you
 

Attachments

  • Screenshot_2024-06-15-12-02-07-591_com.miui.bugreport.jpg
    Screenshot_2024-06-15-12-02-07-591_com.miui.bugreport.jpg
    1.1 MB · Views: 356
try Diferent ways to get fastboot screen

From google seach ... and other forum .... starts with X .... :)

After discovering this I understood that the FASTBOOT mode which I enter when I reboot the phone pressing Volume Down + Power or if I use the command:

adb reboot bootloader

is working completely DIFFERENTLY than the FASTBOOT mode if I:

Reboot in to the recovery (TWRP / Lineage OS / AOSPA) and after that from the recovery sub menu I Reboot to Fastboot.
Ok but on Houji there isn't a recovery that descript the phone, so can I ignore this?

Regards
 
Oh Houji this time while i was flashing with the script, appeared a warning message:
Warning: skip copying super image avb footer due to sparse image.
Don't know why..

Anyway thank you developers!

try Diferent ways to get fastboot screen

From google seach ... and other forum .... starts with X .... :)

After discovering this I understood that the FASTBOOT mode which I enter when I reboot the phone pressing Volume Down + Power or if I use the command:

adb reboot bootloader

is working completely DIFFERENTLY than the FASTBOOT mode if I:

Reboot in to the recovery (TWRP / Lineage OS / AOSPA) and after that from the recovery sub menu I Reboot to Fastboot.
No idea what this has anything to do with what he said.
 
  • Like
Reactions: saf.oda


No idea what this has anything to do with what he said.
Not sure why :) ... but I've encountered this issue with my POCO F5 PRO before.
When initiating fastboot mode using the Power + Volume key combination, I experience problems flashing the device using the *.BAT script from the command line.
However, if I reboot the phone into fastboot mode via Magisk recovery or through an ADB command (with the device connected via USB), the *.BAT script executes without errors.
This suggests that fastboot exhibits different behaviors depending on the method used to enter the mode.
Just my 2 cents :)
 
Not sure why :) ... but I've encountered this issue with my POCO F5 PRO before.
When initiating fastboot mode using the Power + Volume key combination, I experience problems flashing the device using the *.BAT script from the command line.
However, if I reboot the phone into fastboot mode via Magisk recovery or through an ADB command (with the device connected via USB), the *.BAT script executes without errors.
This suggests that fastboot exhibits different behaviors depending on the method used to enter the mode.
Just my 2 cents :)
"via Magisk recovery"? What's that?
"through an ADB command"? Which command?
 
Always on display and mode "always on" is this considering as screen off according to full charge speed at 120w on shennong?
 
Hey, IShtar here. was there a change in grid options I missed, I only see 4 options. 4x6, 4x7, 5x6 and 5x7?
 
Hey, IShtar here. was there a change in grid options I missed, I only see 4 options. 4x6, 4x7, 5x6 and 5x7?
In this launcher update, available options are calculated according to the set icon size.
Decrease the icon size, and you'll have more options.
 
  • Like
Reactions: Iain_B
Status
Not open for further replies.

Similar threads