HyperOS 1.0 23.11.8/13/16


Status
Not open for further replies.
Is call recorder still available?

If I clean install this version, can I downgrade in the future to MIUI14?

(Xiaomi 13 Ultra)
 
Two questions:
1. Is it possible to enable color notifications on the status bar? They used to be colorful in MIUI 14, now they are all white.
2. I noticed a problems with notifications from messenger and Whatsapp. They appear only when I open the app. Did a test: closed the apps, sent a message from different phone and no notification. Probably I could have it working by enabling autostart for them, but it's it really the only way? I MIUI it wasn't necessary.
Regards
 
For anyone with the Gallery crashing issue. This is how I fixed it:

1) Open 'Gallery' app info
2) Under Permissions, make sure 'Location' is set to 'While using app'
3) Try and open Gallery app again. If it works, great. If it crashes again, go to step 4.
4) Under Developer options: Make sure 'USB Debugging' is on. Make sure 'USB Debugging (Security settings)' toggle is set to ON. Connect phone to PC.
5) Open ADB and run: adb shell pm clear com.miui.gallery
6) Repeat steps 1 - 3.
7) Should now work.

Hope that helps.

Note to devs: The Gallery app only has a "Clear cache" option in App info. Maybe a "Clear data" could solve this without the need for adb?
Just had some time to test this and i confirm that it's working perfectly. I needed to enable USB Debugging in Developer settings as per your advice as well or else i was getting an error
 
  • Like
Reactions: pricklyleaks
Wait, you were running latest weekly .eu with a13 skk . Copied hyperOS and new a14 skk v8.1t5 to device storage, rebooted to a13 twrp, dirty flashed HyperOS, rebooted and then flashed A14 twrp using rebooting in a13 again? Did you removed pin/pass before you booted to update to hyperOS?
I updated with twrp a14skk, then install HyperOS, it works perfect! Xiaomi 13 Pro
 
Last edited:
ok, so first twrp update to a14, but didnt you used any pin or passcode for unlocking phone or can you put in in and decrypt on a14 twrp
I updated to HyperOS (mondrian) first and then installed A14 twrp, i got no issues. So i don't think it matters
 
  • Like
Reactions: PeaceOne
ok, so first twrp update to a14, but didnt you used any pin or passcode for unlocking phone or can you put in in and decrypt on a14 twrp
Yes, i updated first TWRP and after that, i install HyperOS. I have a PIN in TWRP which i have not lost with update. I update TWRP a14 directly in TWRP a13.
 
  • Like
Reactions: marcel112
Wait, you were running latest weekly .eu with a13 skk . Copied hyperOS and new a14 skk v8.1t5 to device storage, rebooted to a13 twrp, dirty flashed HyperOS, rebooted and then flashed A14 twrp using rebooting in a13 again? Did you removed pin/pass before you booted to update to hyperOS?
I was on latest Miui14 weekly with 13 Ultra and TWRP for A13. I downloaded current HyperOS for 13 Ultra on internal storage and installed via A13 TWRP. System worked without issues, but TWRP couldn't decrypt (password entry not possible), but system was working. Then yesterday I updated TWRP to A14 version using fastboot method (flash to recovery A/B as described in this board).

All working, PIN working with the same as before on A13 version of TWRP.
 
Last edited:
  • Like
Reactions: marcel112 and strub
Two questions:
2. I noticed a problems with notifications from messenger and Whatsapp. They appear only when I open the app. Did a test: closed the apps, sent a message from different phone and no notification. Probably I could have it working by enabling autostart for them, but it's it really the only way? I MIUI it wasn't necessary.
Regards
Ad.2 I've just noticed that both apps DO have autostart enabled, but they don't display notifications unless I open the apps.
I have checked another application for which I didn't receive the notification for 5h! (I was able to read it only when I opened the app manually). BTW, notifications are enabled for all of them.
What is the problem? Anyone experiencing the issue?
Regards
 
Grant SMS and Nearby Devices permissions to the Wallet app (SMS is a hidden one, you may want to use the Hidden Settings app or similar to manipulate hidden permissions)
dont help - sms and nearby on. Can you share your Hidden Settings?
 
Hello 2 all

Thanks again devs for this milestone. I really appreciate your hard work. I wouldn't use Xiaomi without Xiaomi.eu at all! Just love it! I can't wait to install HyperOS on my 13 Pro but I'm a bit scared as the device is my daily device. After reading every post I still have some questions. Maybe you can help me out.

Here's my setup:
Xiaomi 13 Pro (nuwa) - China Import running 14.02.23.9.18 DEV (latest weekly)
Root with magisk (nice to have but not necessary for me)
TWRP 3.7.0.0_12-Xiaomi13Pro_v7.2v_A13
Would flash thru Fastbook on my Mac (can go thru Windows 11 as well).

My questions:
1. Clean install is always best I know but if it works thru dirty flash I would be happy. Anyone has good experience with dirty flash?
2. As my bootloader is unlocked I will not run into problems regarding bootloader as I'm using a chinese market device, correct? I read about "no unlock BL without Level 5" but I assume it's for new devices. Is that correct?
3. Do I need to update my TWRP to twrp-3.7.0_12-v8.1t5_A14-nuwa-skkk.img before installing thru fastboot? I know it's not encrypting yet. Mine seems to be a bit old.

Thank you so much for your support! I appreciate!
 
Hello 2 all

Thanks again devs for this milestone. I really appreciate your hard work. I wouldn't use Xiaomi without Xiaomi.eu at all! Just love it! I can't wait to install HyperOS on my 13 Pro but I'm a bit scared as the device is my daily device. After reading every post I still have some questions. Maybe you can help me out.

Here's my setup:
Xiaomi 13 Pro (nuwa) - China Import running 14.02.23.9.18 DEV (latest weekly)
Root with magisk (nice to have but not necessary for me)
TWRP 3.7.0.0_12-Xiaomi13Pro_v7.2v_A13
Would flash thru Fastbook on my Mac (can go thru Windows 11 as well).

My questions:
1. Clean install is always best I know but if it works thru dirty flash I would be happy. Anyone has good experience with dirty flash?
2. As my bootloader is unlocked I will not run into problems regarding bootloader as I'm using a chinese market device, correct? I read about "no unlock BL without Level 5" but I assume it's for new devices. Is that correct?
3. Do I need to update my TWRP to twrp-3.7.0_12-v8.1t5_A14-nuwa-skkk.img before installing thru fastboot? I know it's not encrypting yet. Mine seems to be a bit old.

Thank you so much for your support! I appreciate!
All already answered by many and also many shared how it worked for them. Reading helps.

1. Yes
2. Yes. You are unlocked already
3. No
 
i flashed latest miui 14, rebooted, setup, rebooted to a13 twrp, flashedtwrp a14, flashed hyper os. all good. After setting up hyper os, rebooted back to a14 twrp, encryption working, and flashed magisk 26.1 without issues. fuxi

got issues connecting samsung watch 5 pro though.. google play services needs update... know the issue....is due to wrong fw for connecting... to bad. bye hyper os
 
Last edited:
  • Like
Reactions: strub
Status
Not open for further replies.

Similar threads

Replies
51
Views
45K
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
53K