MIUI 12.2 20.10.22

[Ted presley]

its automatic go to TWRP after download the update file to decryption the phone and update it via TWRP
and what i know after install the latest updates i cant use TWRP any more so i cant update then?!

Manually update, download the zip file through web and update instead using the buit-in updater.

 

[sweetxtooth]

Manually update, download the zip file through web and update instead using the buit-in updater.

i do same i download the update file from pc then put it in phone and choose manual update file and after verify the update file its say must decrypt the phone to update and it manually reboot and boot to TWRP to decrypt the phone and update it

 

[Ted presley]

i do same i download the update file from pc then put it in phone and choose manual update file and after verify the update file its say must decrypt the phone to update and it manually reboot and boot to TWRP to decrypt the phone and update it

You have to manual, manual, just don't use that booting to twrp from phone, you have to boot to fastboot AND boot TWRP from there.

Which mean everytime you update the rom, you have to use the PC. That's the most annoying part.

 

[suntzulee]

why is that phone call recording fail in October rom onwards? It was working fine in September rom. Is there any fix for it. When i try to play all the recorded file during phone call, the whole recording seem no sound when played...

 

[sweetxtooth]

You have to manual, manual, just don't use that booting to twrp from phone, you have to boot to fastboot AND boot TWRP from there.

fast boot is when the phone off i hold volum up and power and then choose fastboot correct ???
im now on old unoffical Beta TWRP do i install the new offical TWRP 3.4.0-0 from twrp.me???
on change log its say (most currently supported devices)

 

[gkalen]

Some devices with Android 11 have the known issue with twrp ..
You have to download the rom to phone ..
Reboot pnone and hold volume down to enter fastboot mode..
Connect phone to pc and turn on a cmd ..
fastboot devices
fastboot boot twrp.img
Now phone will enter twrp , flash update , done ..

 

[ray yek]

Can I flash this week rom via TWRP for Mi 10 youth/lite zoom vangogh?

 

[Iago14]

try to raise volume. maybe its volume off

also try to connect to any other bluetooth maybe its model conflict. also try to flush cache in bluetooth apk

That doesnt fix. I tried clean install.

 

[Iain_B]

After i made recovery by twrp and the update installed ,there was two option 1: reboot system 2 wipe cache i selected option 1
, that step should turn on normally but the phone was turn off ,i tried to turn on ,the screen just showed me the mi logo as normal when we turn on it ,and the show for a secend and phone turn off ,i treid to comeback to recovery mode but it didin't work.

You have the Mi 10 Pro. This has known issues with TWRP.

If you have not already done it, you download your new ROM;
You should go into TWRP Recovery using Fastboot, eg. through power on and volume down;
Through Fastboot, you go into TWRP Recovery by flashing the TWRP image from your PC;
You log into TWRP to decrypt memory;
You should clear Cache and Dalvik (assuming you are updating from a recent ROM);
You should delete /data/system/package_cache folder (again assuming from recent ROM);
Install your ROM for the Mi 10 Pro;
Reboot to system.

This should now boot your phone correctly.

 

[carlofarina]

why is that phone call recording fail in October rom onwards? It was working fine in September rom. Is there any fix for it. When i try to play all the recorded file during phone call, the whole recording seem no sound when played...

then it happens to others too! I also tried to do clean install and it worked for 1 hour and then it stopped working.

 

[kuzu115]

Try to go to settings/apps/manage apps/ (show system apps) type delmar fingerprint (force stop and clear data) and go to security too flush data

The name of the application in my phone is In-Display Fingerprint. After cleaning data of this app and adding a new fingerprint, unlock works ok again.
Only deleting and readding fingerprint didn`t help.
Thanks!

 

[MAMAC]

The name of the application in my phone is In-Display Fingerprint. After cleaning data of this app and adding a new fingerprint, unlock works ok again.
Only deleting and readding fingerprint didn`t help.
Thanks!

So now its all ok?

 

[MAMAC]

That doesnt fix. I tried clean install.

Clean install here is very discussible term. I make 4 times clean install and he still keep some files. It was very strange im sure that i flush all partition several times. So u maybe can try manualy to do that.

 

[cegyedi]

Hello someone have idea to activate long exposure and all stuff from mi 10t camera app? To mi note 10

 

[kuzu115]

So now its all ok?

Figerprint unlock now works perfect!

 

[MAMAC]

Figerprint unlock now works perfect!

Ok im glad that it helped

 

[Doron Ezon]

You have the Mi 10 Pro. This has known issues with TWRP.

If you have not already done it, you download your new ROM;
You should go into TWRP Recovery using Fastboot, eg. through power on and volume down;
Through Fastboot, you go into TWRP Recovery by flashing the TWRP image from your PC;
You log into TWRP to decrypt memory;
You should clear Cache and Dalvik (assuming you are updating from a recent ROM);
You should delete /data/system/package_cache folder (again assuming from recent ROM);
Install your ROM for the Mi 10 Pro;
Reboot to system.

This should now boot your phone correctly.

Sorry for the question - for my clarification - for installing this ron, is that need to make only clean install? cnat i install in on the current system (of course by using flashboot)?

 

[Iain_B]

Sorry for the question - for my clarification - for installing this ron, is that need to make only clean install? cnat i install in on the current system (of course by using flashboot)?

As far as I am aware, this is OK for a 'dirty' install, ie. on top of your previous and recent version, without having to do a complete wipe.
This is assuming that you were not upgrading from a much earlier or different version.

 

[MAMAC]

not at all.. while sleeping, only 2% for 7 hours...wifi and cellular data always on

I can confirm that heavy usage still at the end of the day i have like 40%. But if he have battery drain. He can try that and also he can try to go to settings/apps/manage apps/ find system app called miuibiometric and clear data

 

[LosTigeros]

Try to go to settings/apps/manage apps/ (show system apps) type delmar fingerprint (force stop and clear data) and go to security too flush data

I couldn't find "delmar fingerprint" but I've found "In-Display fingerprint" stopped and cleared the data + stopped and cleared the "Security" data too.
The error is still there.

 

[MAMAC]

I couldn't find "delmar fingerprint" but I've found "In-Display fingerprint" stopped and cleared the data + stopped and cleared the "Security" data too.
The error is still there.

Sorry just to be clear u have a problem with slow fingerprint unlock? I mean "the error is still there" confuse me. What kind of error?

 

[skorvy]

Mi 9T.

Battery backup is good. As you can see at the screenshot. It is the first charging after install. Dirty flash.

Is it me or camera is somehow improved? Especially night mode?

 

[gkalen]

fast boot is when the phone off i hold volum up and power and then choose fastboot correct ???
im now on old unoffical Beta TWRP do i install the new offical TWRP 3.4.0-0 from twrp.me???
on change log its say (most currently supported devices)

Try this twrp ... https://androidfilehost.com/?fid=8889791610682877441
Do not flash the twrp.img , just boot in twrp through fastboot mode ..
So the steps are ..
Hold vol down and power on to enter fastboot mode ..
Open a cmd and type ..
fastboot devices ( cmd will recognize the device )..
fastboot boot TWRP_cmi.img ( phone will enter to twrp )..
If internal space is encrypted do a format data , go to WIPE , choose right box which says format data , type yes and hit enter ..
Then go back to main menu of twrp and choose REBOOT, then hit Bootloader ( phone will enter fastboot mode ) ..
fastboot boot TWRP_cmi.img ( phone will enter again twrp ) ..
Now twrp probably will be encrypted and you can copy zip rom file in your sd card ..
Choose Wipe and swipe right to do a factory reset ..
After installation finished , choose left button and swipe to wipe cache and dalvik ..
Reboot system , Done !!

 

[smohanv]

Try this twrp ... https://androidfilehost.com/?fid=8889791610682877441
Do not flash the twrp.img , just boot in twrp through fastboot mode ..
So the steps are ..
Hold vol down and power on to enter fastboot mode ..
Open a cmd and type ..
fastboot devices ( cmd will recognize the device )..
fastboot boot TWRP_cmi.img ( phone will enter to twrp )..
If internal space is encrypted do a format data , go to WIPE , choose right box which says format data , type yes and hit enter ..
Then go back to main menu of twrp and choose REBOOT, then hit Bootloader ( phone will enter fastboot mode ) ..
fastboot boot TWRP_cmi.img ( phone will enter again twrp ) ..
Now twrp probably will be encrypted and you can copy zip rom file in your sd card ..
Choose Wipe and swipe right to do a factory reset ..
After installation finished , choose left button and swipe to wipe cache and dalvik ..
Reboot system , Done !!

This has been explained few times earlier. Couldn't find answer for the questions about flashing magisk v21. Can we root the device flashing magisk via booting to TWRP through fastboot command. Thanks.

 

[gkalen]

This has been explained few times earlier. Couldn't find answer for the questions about flashing magisk v21. Can we root the device flashing magisk via booting to TWRP through fastboot command. Thanks.

Yes , you can flash magisk with the same procedure .. boot to twrp and flash magisk ..
I don't use magisk though and i don't know if it gives issues after installation ..