MIUI 13 MIUI 13 STABLE RELEASE


Status
Not open for further replies.
I want to report a problem applications MI messages and MI Gallery they always remain in English no matter which language I choose.Is anyone else having this problem?
Device: Redmi Note 10 Pro
MIUI 13.0.14 by xiaomi.eu
Concrete language Serbian.
 
Hi, I need help please. I tried to install xiaomi.eu_multi_MI10Ultra_V13.0.5.0.SJJCNXM_v13-12.zip with TWRP but it was 0mb so I
  • Change File System, choose Ext2, and swipe to confirm.
  • Now switch back to Ext4 and swipe to confirm.
After that I saw the mb of my cellphone and installed the zip file but since then the phone either always goes to twrp or it's looping on Mi logo
Also Install says "Updater process ended with ERROR:1"
Failed to mount /vendor
Failed to mount /product
Failed to mount /odm

What can I do? thanks for help
look here…
 
A locked bootloader's purpose is to prevent flashing any unofficial images to the device...
An instruction to "go through bootloader unlocking process" is not even necessary. What's necessary is common sense and basic knowledge of what a locked bootloader is in the first place...
If you were allowed to flash unofficial images with a locked bootloader, then that lock would be useless.
Sorry, I've just asking for the addition locale setting in my last post :p
 
Hello, I don't know if that was already posted here, but I have a problem while using Waze in my car (Android auto), the navigation crashes whatever in 5, 10, 15 mins... If i unplug the cable and plug again next exiting Waze and reloading, the problem remains.
The problem appeared next flashing that rom, i don't know what could be wrong ?
Without connecting to Android auto, there is no problem but i wished i could connect without any worry.
Does anyone else have the same problem? Any way to solve that, if possible, please?
I am on 12TPro (europe) and did format data while flashing that rom.
Except that, I didn't notice anything else "bugging".
Regards from France.
Finally solved the problem, in application settings, select waze, and set "no restriction" about battery.
I don't know why it can freeze on Android Auto when selecting "battery saver"...
Regards.
 
  • Like
Reactions: bingho
Hi. I wonder if anyone can give advice or maybe experienced the same issue.
My 12Pro on the latest 13.0.41 version has issue with charging speeds.
I only noticed that they have added Boosted charging menu which I haven't seen before ( I also didn't need to use as phone would always charge at full speed)
But I noticed that my phone no longer charges fast regardless of the settings and the charger used.
For example using a 120W.
One I plug it it shows fast charge at 120W but its actually only charging at max 30W. It will not fast charge.
The only solution is to reboot the phone. Then it works for a short while and then stops again..

Im totally lost,I already reinstalled the firmware in hope that would fix it but no...
 
You flash using TWRP for A12 since your system is still A12. Once you booted A13 successfully, you may flash the new TWRP for A13.

Thanks for the reply.


Now we only need to wait until the first A13 Rom is released

Edit: And will you release a stable Rom when it is available to beta pilots or only when it is available for everybody?
 
Good afternoon, I have the version that I received via OTA (13.0.2.0 SJWMIXM) on a redmi note 9s, I wanted to know if there is any difference (less pre installed applications, etc) between that version received by OTA and the ROM published here, greetings and many Thanks in advance
 
Good afternoon, I have the version that I received via OTA (13.0.2.0 SJWMIXM) on a redmi note 9s, I wanted to know if there is any difference (less pre installed applications, etc) between that version received by OTA and the ROM published here, greetings and many Thanks in advance
If you are are already on Xiaomi.eu Stable and then you receive the OTA update notification, it will be the same ROM as if you manually download following the link(s) from the first post

Of course, the installation is easier if you are already on the Recovery Xiaomi.eu ROM - you just accept the update and follow the instructions

If you are on the Fastboot Xiaomi.eu ROM, you will have to look for the guide about installing custom recovery for A12 (there must be at least one post with that link among the last 20-30 posts here, ie, if not on this page then look for on the previous page), and to follow that guide to download and install your TWRP and then the downloaded Xiaomi.eu Recovery ROM upgrade
 
Last edited:
  • Like
Reactions: katerpanne
If you are are already on Xiaomi.eu Stable and then you receive the OTA update notification, it will be the same ROM as if you manually download following the link(s) from the first post

Of course, the installation is easier if you are already on the Recovery Xiaomi.eu ROM - you just accept the update and follow the instructions

If you are on the Fastboot Xiaomi.eu ROM, you will have to look for the guide about installing custom recovery for A12 (there must be at least one post with that link among the last 20-30 posts here, ie, if not on this page then look for on the previous page), and to follow that guide to download and install your TWRP and then the downloaded Xiaomi.eu Recovery ROM upgrade
Thanks for your answer, I don't have the xiaomi.eu ROM installed on my device, I have the xiaomi stock ROM, and I wanted to know if there is a difference between one and the other in terms of battery consumption, pre-installed apps, etc.
 
Thanks for your answer, I don't have the xiaomi.eu ROM installed on my device, I have the xiaomi stock ROM, and I wanted to know if there is a difference between one and the other in terms of battery consumption, pre-installed apps, etc.
Of course there is a DIFFERENCE between your STOCK ROM and the Xiaomi.eu CUSTOM ROM - this forum is not about the stock ROMs

Besides, you cannot install any custom ROM (Xiaomi.eu or any other) without unlocking the Bootloader first

Xiaomi.eu are great ROMs but sorry to say, apparently you are not aware what is all this here about, so please think twice, read, study, learn and then decide

PS: I don't have your Note 9s. If Xiaomi.eu ROM for your device is based on Global (not on China, as for many other devices), then Xiaomi.eu is kind of 'debloated' stock Global. But to install Xiaomi.eu, you still need the unlocked BL and custom recovery
 
Last edited:
hello everyone, themes app in chinese, okay, but can't import 3rd party mtz files, when using import, it see MTZ extension like folder, cant select, please help to solve problem - no one answering
 
I updated my Poco F3 to 13.0.9.0, update went smooth and fast no issue m whatsoever only problem is i can't make this go away...

Tried cleaning cache and data of the updater nothing seems to help.
 

Attachments

  • Screenshot_2022-11-08-22-59-12-338_com.android.settings.jpg
    Screenshot_2022-11-08-22-59-12-338_com.android.settings.jpg
    231.8 KB · Views: 1,420
  • Screenshot_2022-11-08-22-59-17-113_com.android.settings.jpg
    Screenshot_2022-11-08-22-59-17-113_com.android.settings.jpg
    268.3 KB · Views: 1,398
Of course there is a DIFFERENCE between your STOCK ROM and the Xiaomi.eu CUSTOM ROM - this forum is not about the stock ROMs

Besides, you cannot install any custom ROM (Xiaomi.eu or any other) without unlocking the Bootloader first

Xiaomi.eu are great ROMs but sorry to say, apparently you are not aware what is all this here about, so please think twice, read, study, learn and then decide

PS: I don't have your Note 9s. If Xiaomi.eu ROM for your device is based on Global (not on China, as for many other devices), then Xiaomi.eu is kind of 'debloated' stock Global. But to install Xiaomi.eu, you still need the unlocked BL and custom recovery
I know the whole issue of installing a ROM like this or any other because I already did it on different devices, they all worked without problems, my question was because the stock rom that I have installed is consuming a lot of battery, I know that removing apps that are not used help, that's why I asked what the difference was in terms of performance between one and the other, according to what I read, the xiaomi.eu for the note 9S comes from the global stock rom but not from the Chinese one, greetings
 
Hi guys, I wonder what's going on here, there's an update notification but when I tried to download them it says updater isn't responding and also check the site for downloading recovery rom and it's not available yet. My device is Redmi note 9 pro.
 

Attachments

  • Screenshot_2022-11-09-20-33-29-189_com.android.updater.jpg
    Screenshot_2022-11-09-20-33-29-189_com.android.updater.jpg
    194.5 KB · Views: 435
  • Screenshot_2022-11-09-20-33-57-870_com.miui.home.jpg
    Screenshot_2022-11-09-20-33-57-870_com.miui.home.jpg
    329.6 KB · Views: 436
Last edited by a moderator:
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
38K
Replies
51
Views
31K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
32K
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
30K