MIUI 13 MIUI 13 STABLE RELEASE


Status
Not open for further replies.
No my device is locked, i want to update my rom from old version to newest version, i didn't get OTA update so far, but i found latest rom for EEA in this site, i couldn't do it with xiaomi flash tool
Just to make sure it is clear for you, this is a custom ROM forum, not an official Xiaomi EEA ROM download site.
 
  • Like
Reactions: katerpanne
Hi, there. I have a note 9 pro, but it's still freeze on miui 12, android 10 and security patch of 2021-03.
I tried with an hard reset to fix the problem but nothing changed. So I tried to unlock the bootloader to make a manual update.
After miflash said to wait the classical week, I tried also with the OEM Unlock feature but the prompt shows me this error:
fastboot flashing unlock FAILED (remote: 'Token Verify Failed, Reboot the device').

Is there something else I can do or try now? Keeping a resetted device for a week is very annoying.
 
Hi, there. I have a note 9 pro, but it's still freeze on miui 12, android 10 and security patch of 2021-03.
I tried with an hard reset to fix the problem but nothing changed. So I tried to unlock the bootloader to make a manual update.
After miflash said to wait the classical week, I tried also with the OEM Unlock feature but the prompt shows me this error:
fastboot flashing unlock FAILED (remote: 'Token Verify Failed, Reboot the device').

Is there something else I can do or try now? Keeping a resetted device for a week is very annoying.
did you use the miui unlock tool ? look here…
 
  • Like
Reactions: Ratzfatz
did you use the miui unlock tool ? look here…
Yep, I tried to use it like first attempt, but like I said, I need to wait 168 hours before complete the unlock with it.
 
Running MIUI 13.0.7.0 xiaomi.eu on my Mi10 and wanna close bootloader and flash stock MIUI 13.0.6.0 EEA over MiFlash... can I do it?
 
You don't format data when flashing the same ROM, but different versions. Stock miui, Xiaomi EU stable and Xiaomi EU weekly ARE different ROMs, so Data partition wipe is required because the encryption changes slightly and it causes problems.
oh my fault thanks
 
what is your challenge? please describe the issue while installing the recovery rom

look here…
Hello, I'm having the same problem. got the OTA update from 13.0.8 via Updater but after it tries to reboot prior to install the update it goes back to system. So i tried by booting Ofox and Twrp to update it manually but when finishes installing It doesnt boot just go back to recovery.
 
Hey!
Could someone help?
I'm trying to install twrp on my Poco F3, but on my PC, it says that the content of the disk image file is corrupted. What could cause this? So frustrating, I don't know what to do.
 
Dear @ingbrzy , please make the latest 13.0.9.0 global rom for Mi 11 lite 4G Courbet with FASTBOOT INSTALL as previous one, because the recovery version doesnt installs for me via TWRP...
PLEASE! MAKE FASTBOOT ROM! The Latest TWRP does not work (Can not decrypt storage, and returns to TWRP after reboot again and again)
 
I have miui 13.0.5 and poco x3 pro, is normal that fingerprint not work on paypal or postepay?
Try checking if your device has lost Widevine L1 status. If that's the case, then you can get the L1 certification back by going to

Settings->Passwords & Security-> Fingerprint unlock->Fingerprint payments-> Widevine (L1)

and pressing the download button. Provided there's nothing else wrong with your device, after you get a 'Update successful' toast message and rebooting (to be on the safe side) you'll be able to use contactless payments once again.

EDIT: Checking whether your phone passes SafetyNet check won't hurt either.
 
Try checking if your device has lost Widevine L1 status. If that's the case, then you can get the L1 certification back by going to

Settings->Passwords & Security-> Fingerprint unlock->Fingerprint payments-> Widevine (L1)

and pressing the download button. Provided there's nothing else wrong with your device, after you get a 'Update successful' toast message and rebooting (to be on the safe side) you'll be able to use contactless payments once again.

EDIT: Checking whether your phone passes SafetyNet check won't hurt either.
do you have poco x3 pro? it work on your device? il already have widevine l1 available, don't know what is the problem, maybe a bug of rom
 
The brightness is darker at the highest Level one Xiaomi 12. On the previous version the Display was brighter.

Or ist this only on my Device?
 
Xiaomi 12s ultra 13.0.10 in this version someone has presented overheating when charging the phone?

Thanks
 
I've been hesitant to upgrade my k30pro on stable MIUI 12.5, 12.5.7 (android 11) as I've heard so much back and forth..

Is it worth the hassle and risk to update with fastboot? I've got the 8gb/256 version and its almost full with data... Are there any big differences on MIUI 13 that are worth while? Bugs etc? Right now my phone works great only issue is scroll screenshots for chrome.. But I can live without that..

Any advice appreciated

Thanks
 
I use exactly this TWRP,
Installation complete without any errors, but when i reboot into system? it returns to TWRP after reboot again and again
PLEASE HELP!

Mi 11 Lite 4G Courbet
do you have magisk modules, is it your first installation of xiaomi.eu rom, did you move from weekly to stable or vice versa, did you tried to install it again?

it is not working is not helpful… perhaps this will work. extract boot.img from last fastboot and flash it.. but its the last what I want to do

# fastboot flash boot boot.img

https://xiaomi.eu/community/threads/howto-install-recovery-image.66211/
 
do you have magisk modules, is it your first installation of xiaomi.eu rom, did you move from weekly to stable or vice versa, did you tried to install it again?

it is not working is not helpful… perhaps this will work. extract boot.img from last fastboot and flash it.. but its the last what I want to do

# fastboot flash boot boot.img

https://xiaomi.eu/community/threads/howto-install-recovery-image.66211/
I haven't magisk modules, i try to update xiaomi.eu rom 13.0.8 to 13.0.9.
Previous 13.0.8 was Fastboot rom, and it's flashed correctly. But the update 13.0.9 is TWRP rom, and this is a problem, he don't want to install anyway.
 
Last edited:
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
41K
Replies
51
Views
38K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
42K
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
33K