MIUI 13 MIUI 13 STABLE RELEASE


Status
Not open for further replies.
I can't unzip the Mix 4 last archive (V13.0.8.0) on a mac. Am I the only one? I downloaded it multiple times and also from the phone it self.
 
Last edited:
Hi there,
I'm already on Miui 13.0.4 Android 12 global version. Bootloader unlocked and with twrp installed. I flashed this rom via twrp. then reboot. But i can tell my device have no system. After first rebooting, there is a red xiaomi logo. Now, my phone is empty. there is no files on "files" twrp option.
I know how to unbricked with MiFlash. It's Done.
Although I want to install xioami EU. (no the fastboot ones)
¿Does anyone know the correct steps to install xioami eu on this device?
 
Hi there,
I'm already on Miui 13.0.4 Android 12 global version. Bootloader unlocked and with twrp installed. I flashed this rom via twrp. then reboot. But i can tell my device have no system. After first rebooting, there is a red xiaomi logo. Now, my phone is empty. there is no files on "files" twrp option.
I know how to unbricked with MiFlash. It's Done.
Although I want to install xioami EU. (no the fastboot ones)
¿Does anyone know the correct steps to install xioami eu on this device?
which device do you have and which twrp and rom version did you use? did you see any errors while flashing with twrp?

 
the same with me
Deavice: Xiaomi 11 Ultra
Rom Version now: xiaomi.eu_multi_MI11Pro_MI11Ultra_22.8.10_v13-12
I've recently had the problem that my call list and messages are no longer synchronized.
Already flashed back to original ROM stable Rom and back to xiaomi.eu.
When I try to activate it, I get the message to enter my phone number.
Then fails with the message SMS sync has not been activated Tap to repeat service has not been activated tap to try again....
 
Aïe, I don't know how to flash a recovery
And after installing recovery, we can flash the new rom?
No you don't flash the recovery, the MIX 4 recovery is boot only for now, so use `fastboot boot xxxx.img` to boot into TWRP, then flash the ROM.
 
No you don't flash the recovery, the MIX 4 recovery is boot only for now, so use `fastboot boot xxxx.img` to boot into TWRP, then flash the ROM.
OK
So I put my phone in fastboot mode and I click on the boot (.img) file?
And then in recovery I choose the zip file (rom) I downloaded...
 
OK
So I put my phone in fastboot mode and I click on the boot (.img) file?
And then in recovery I choose the zip file (rom) I downloaded...
look here…
 
look here…
Thank you, I think I'm not able to do this...
I will not do this new update.
 
I tried to update my POCO X3 Pro to the latest version (recovery), but it tells me that the internal storage is encrypted. I've tried entering the PIN I have on the lock screen and even removed it, but I can't get access to the update package. Has it happened to anyone else?
 
I tried to update my POCO X3 Pro to the latest version (recovery), but it tells me that the internal storage is encrypted. I've tried entering the PIN I have on the lock screen and even removed it, but I can't get access to the update package. Has it happened to anyone else?

without any details ... I will use my glass sphere :)

Now you need a TWRP for your device A12
- download TWRP for your device from xiaomi.eu
- or download TWRP for your device from skkk

TWRP update shows ERROR: 1 / can not mount system ...
- this error can occur if you try the update with updater app or if you started TWRP manually
- Solution:
-> while you are in TWRP reboot your device in recovery mode
-> try to install the rom again
-> if it will fail, reboot in recovery again
-> or use "fastboot boot twrp.img" again
-> sometimes you need more then one try
-> if it will not work choose another twrp version

If you cant decrypt / see your folders after booting TWRP
-
check if you use the correct TWRP (see links)
- change Pattern/Password to PIN
- remove the PIN in system and try it again
- solution from @Karpfenhai
- solution1 & solution2 from @digeratz
- if it will not work choose another twrp version
 
  • Like
Reactions: adrianhh89

without any details ... I will use my glass sphere :)

Now you need a TWRP for your device A12
- download TWRP for your device from xiaomi.eu
- or download TWRP for your device from skkk

TWRP update shows ERROR: 1 / can not mount system ...
- this error can occur if you try the update with updater app or if you started TWRP manually
- Solution:
-> while you are in TWRP reboot your device in recovery mode
-> try to install the rom again
-> if it will fail, reboot in recovery again
-> or use "fastboot boot twrp.img" again
-> sometimes you need more then one try
-> if it will not work choose another twrp version

If you cant decrypt / see your folders after booting TWRP
-
check if you use the correct TWRP (see links)
- change Pattern/Password to PIN
- remove the PIN in system and try it again
- solution from @Karpfenhai
- solution1 & solution2 from @digeratz
- if it will not work choose another twrp version
Sorry, I will try to give more details:
Device: POCO X3 Pro
Current version: 13.0.3.0.SJUMIXM
Upgraded version: 13.0.5.0.SJUMIXM
TWRP version: twrp-3.6.2_11-0

I don't know if you need any more data.
I have accessed TWRP both from the update button from settings, and manually and with the physical buttons of the device, but in all cases does not read me the internal storage because it is encrypted.
I've tried to set the unlock PIN, I've tried to remove it (right now I have no security enabled), but I can not access the internal storage so I can flash the update ROM.

Any help would be welcome
 
Sorry, I will try to give more details:
Device: POCO X3 Pro
Current version: 13.0.3.0.SJUMIXM
Upgraded version: 13.0.5.0.SJUMIXM
TWRP version: twrp-3.6.2_11-0

I don't know if you need any more data.
I have accessed TWRP both from the update button from settings, and manually and with the physical buttons of the device, but in all cases does not read me the internal storage because it is encrypted.
I've tried to set the unlock PIN, I've tried to remove it (right now I have no security enabled), but I can not access the internal storage so I can flash the update ROM.

Any help would be welcome
you have to use twrp for a12 not a11…
see filename… _11 instead of _12

its available, try it
 
  • Like
Reactions: adrianhh89
AFAIK the offical twrp (3.6.2_11-0) doesn't support A12 yet. So you'll need to find an unofficial version that supports A12.

Already answered above.
 
  • Like
Reactions: katerpanne
On GAUGUIN, I use Bluetooth unlock. Many times when I swipe the lockscreen, it asks for pin. Then I tap back and swipe again, and it unlocks properly using my MiBand. This never happened previously. I tried re-pairing my miband, reinstalling Zepp Life (as well as Xiaomi Wear) and changing lock screen. Nothing helped.
Anyone has a fix for this? I would say it happens 30% of the time I unlock.
V13.0.6.0.SJCNXM on GAUGUIN.
 
Can i get 90fps pubg game play on miui 13 stable or should i revert to miui 12. Am using poco x3 pro global, please advise
 
which device do you have and which twrp and rom version did you use? did you see any errors while flashing with twrp?

which device do you have and which twrp and rom version did you use? did you see any errors while flashing with twrp?

I have a Redmi note 11 (spes).
I used 3.6.2 twrp version.
I was on MIUI 13.0.4 global Android 12. Then boot twrp, flash current twrp, flash Xiaomi EU 13.0.2 android 12. And occurred than error.

I'm currently on Xiaomi eu 13.0.10 android 11. I've already tried to install the update via updater app and twrp.
However, I get the same red Xiaomi logo after rebooting.
 
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
38K
Replies
51
Views
31K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
32K
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
30K