MIUI 13 MIUI 13 STABLE RELEASE


Status
Not open for further replies.
Thank You. Made like you told me and now i am on Miui 13.
The only think i see now is that bank apps doesnt let me use my fingerprint... You know why is this happening? Like i lost the security... No matters if i try to add or remove new fingerprints the bank apps Dont like the security now on the phone and Dont let me use It... How can i solve this? Thanks
 
Grazie. Fatto come mi hai detto e ora sono su Miui 13.
L'unico pensiero che vedo ora è che le app bancarie non mi permettono di usare la mia impronta digitale... Sai perché sta succedendo? Come se avessi perso la sicurezza... Non importa se provo ad aggiungere o rimuovere nuove impronte digitali, le app della banca Non mi piace la sicurezza ora sul telefono e non farmela usare... Come posso risolverlo? Grazie
Factory reset
 
I cannot see bat file inside ROM zip to flash this update via fastboot.

However, I could boot in to TWRP recovery and decrypt password to get to system files. Does it mean that I can flash this update via TWRP.

My device details:
Xiaomi 12 Pro running on Android 12 (i.e MIUI 13.0.36 which was the last update released on 23rd June).
 
I cannot see bat file inside ROM zip to flash this update via fastboot.

However, I could boot in to TWRP recovery and decrypt password to get to system files. Does it mean that I can flash this update via TWRP.

My device details:
Xiaomi 12 Pro running on Android 12 (i.e MIUI 13.0.36 which was the last update released on 23rd June).
yes…
 
  • Like
Reactions: Ratzfatz
Any update on wireless charging?
working fine for me , 38% till full , according to the franko kernel app , charges at about 7.5~10w most of the time ( non-original charger 15w max, connected to 27w xiaomi charger), maybe a little slower than before , but i think this because of the ambient temperature here, which is higher these days , so maybe phone heats more than usual
 
  • Like
Reactions: Will197
working fine for me , 38% till full , according to the franko kernel app , charges at about 7.5~10w most of the time ( non-original charger 15w max, connected to 27w xiaomi charger), maybe a little slower than before , but i think this because of the ambient temperature here, which is higher these days , so maybe phone heats more than usual
Thanks for that. Any idea why wireless charging might not be working for me and a few others? It happened when going to Miui 13
 
Hi, I installed the correct TWRP on my mi 11 ultra, when I try to do the update via OTA it reboots to recovery, but when I try to install it gives me mount error at system root(by the way I deleted the dalvik and it formatted everything, good thing I have bakup on the qnap), I tried changing slots on the B but it's the same. I attach photos of the steps. Thanks

x1.jpgx2.jpgx3.jpg
 
Hi, I installed the correct TWRP on my mi 11 ultra, when I try to do the update via OTA it reboots to recovery, but when I try to install it gives me mount error at system root(by the way I deleted the dalvik and it formatted everything, good thing I have bakup on the qnap), I tried changing slots on the B but it's the same. I attach photos of the steps. Thanks

View attachment 43414View attachment 43415View attachment 43416

TWRP update shows ERROR: 1 / can not mount system ...
- this error can occur if you try the update with updater app or if you started TWRP manually
- Solution:
-> while you are in TWRP reboot your device in recovery mode
-> try to install the rom again
-> if it will fail, reboot in recovery again
-> or use "fastboot boot twrp.img" again
-> sometimes you need more then one try
-> if it will not work choose another twrp version
 

TWRP update shows ERROR: 1 / can not mount system ...
- this error can occur if you try the update with updater app or if you started TWRP manually
- Solution:
-> while you are in TWRP reboot your device in recovery mode
-> try to install the rom again
-> if it will fail, reboot in recovery again
-> or use "fastboot boot twrp.img" again
-> sometimes you need more then one try
-> if it will not work choose another twrp version
Perfect restarted in recovery from recovery the installation succeeded, if I had asked earlier I would not have lost my data. Thanks
 
  • Like
Reactions: katerpanne
the only drawback now if i use TWRP flashing the Xiaomi 11T Pro, i cannot use the Online Banking app, it says its not anymore secure.

Before when i update the phone thru fastboot, i can still use the app. thanks :)
 
did you try to flash the BOOT version?
It is also a problem, that are there too many TWRP version. TWRP is tricky and not User friendly. The only reson that xiaomi.eu Rom is used by many Users is, that you have the MIUI Phone, Contacts and Message App. But the most stay away, because TWRP causes problems from the beginning of the installation.
 
It is also a problem, that are there too many TWRP version. TWRP is tricky and not User friendly. The only reson that xiaomi.eu Rom is used by many Users is, that you have the MIUI Phone, Contacts and Message App. But the most stay away, because TWRP causes problems from the beginning of the installation.
That's why you should not install TWRP on your phone! I always start it from the laptop with "fastboot boot twrp.img". It works...
 
  • Like
Reactions: steberg
the only drawback now if i use TWRP flashing the Xiaomi 11T Pro, i cannot use the Online Banking app, it says its not anymore secure.

Before when i update the phone thru fastboot, i can still use the app. thanks :)
- check if your device is certified
- check if safetynet is ok/green
- check that you dont have a folder like /twrp
- you can try to disable developer options and oem unlocking
 
That's why you should not install TWRP on your phone! I always start it from the laptop with "fastboot boot twrp.img". It works...
haha what a nonsense
installed twrp with the option recovery ramdisk
i had those permission errors to what helped for me was remove pincode lock
 
  • Like
Reactions: Will197

TWRP update shows ERROR: 1 / can not mount system ...
- this error can occur if you try the update with updater app or if you started TWRP manually
- Solution:
-> while you are in TWRP reboot your device in recovery mode
-> try to install the rom again
-> if it will fail, reboot in recovery again
-> or use "fastboot boot twrp.img" again
-> sometimes you need more then one try
-> if it will not work choose another twrp version
it can not be done
 
I would like to ask a question regarding camera optimizations, I don't know if it's the right 3d: will you ever be able to put the adjustable zoom even in the 50mpx(mi 11 ultra) setting? Not so much for dizzying telephotos, but to take advantage of the 2.0 X magnification that corresponds to the 50mm and portrait mode. Thanks
 
  • Like
Reactions: ssssp87
I would like to ask a question regarding camera optimizations, I don't know if it's the right 3d: will you ever be able to put the adjustable zoom even in the 50mpx(mi 11 ultra) setting? Not so much for dizzying telephotos, but to take advantage of the 2.0 X magnification that corresponds to the 50mm and portrait mode. Thanks
Nothing to do with our ROM.
 
yes…
Thanks. It failed halfway through.

E2001: Failed to flash vendor_a partition
Updater process ended with ERROR: 1
Failed to mount '/vendor' (Invalid argument)
Failed to mount '/vendor_dlkm' (No such file or directory)
Failed to mount '/odm' (No such file or directory)
 
Last edited:
  • Like
Reactions: katerpanne
Please use the "Search" function or at least read the last page of this thread.
All worked. Found the issue. I downloaded on to the phone and transferred to my PC. It seems there was an issue in the download. I identified it by unzipping the Zip file downloaded in my phone directly which cause error in unzipped. This proves to me that the download was an issue.

I downloaded with my PC directly and flashed which was successful on the first attempt.
 
  • Like
Reactions: katerpanne
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
41K
Replies
51
Views
36K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
38K
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
32K