MIUI 11 MIUI 11.0 STABLE RELEASE


Status
Not open for further replies.
pfnevess said:
Thanks!

I had the exact same issue before. I think we need to remove all lockscreen protection, password and fingerprint. But I'm not sure. If someone knows, go ahead and share :)
Click to expand...
Dirty flash here from 11.0.4 to 11.0.6 and everything is fine without lose anything. Before flash i removed PIN lock screen and fingerprint
 
  • Like
Reactions: pfnevess
Updated my poco f1 from 11.0.4 to the new 11.0.6 rom , but now SafetyNet check in magisk manager reports cstProfile false, this have never been an issue with any xiaomi-eu rom that I flashed before, it this a new change or just me have this problem ?
 
Beroshima said:
Format data or wipe data in twrp!

Poslano sa mog Mi 9 SE koristeći Tapatalk
Click to expand...
Hey i wiped data and everything is OK, hieroglyphs is gone, and i try to install a xiaomi EU stable rom, twrp everything do it all, but when TWRP proces is done, hi restarts and on the screen shows like in other updates a Mi logo and under mi logo write thats phone is unlocked, and there where is write "phone unlocked" there is must show a ANDROID SING WITH 3 DOTS, but that Android logo is not showing, and phone reboot again in twrp!

Poslano sa mog Mi 9 SE koristeći Tapatalk
 
[QUOTE = "snoopera, post: 531602, membro: 221438"]
Atualizei meu poco f1 da 11.0.4 para a nova 11.0.6 rom, mas agora o SafetyNet check-in no magisk manager relata cstProfile false, isso nunca foi um problema com nenhum xiaomi-eu rom que eu exibi antes, é uma nova alteração ou só eu tenho esse problema?
[/CITAR]

How to pass SafetyNet on Poco F1

While there have been many guides on passing SafetyNet on Poco. All are generic and not tuned/tweaked for our device . So today I'm gonna be posting one specific for Poco. To proceed you will need prior 1.Unlocked bootloader 2. Magisk latest build (18.1 at the time of writing this guide)...
telegra.ph telegra.ph
 
Problem solved, reinstalled weekly and there's an extra permission about pup ups. It's working like a charm.

wimjh67 said:
Hopefully a Dutch reader with a 9T Pro is reading this and telling whether it works on their phone.

Anyway, thanks for your reply.
Click to expand...
 
Hi everyone, I'm in a beta compilation of the 6X, and I wanted to know if you can flash a stable one without problems. And if you can then put beta on stable?
 
darvi ruben said:
Hi everyone, I'm in a beta compilation of the 6X, and I wanted to know if you can flash a stable one without problems. And if you can then put beta on stable?
Click to expand...
Yes you can go from beta to stable or vice versa, you just have to wipe data, cache and dalvik, and install the ROM, if you don't wipe data you can have some problems later, data is just apps, not internal storage
 
I lost my root and I cannot get it back. This is what I do:

1. Install ROM
2. Start to system
3. Reboot to recovery
4. Format data
5. Install magisk.zip in twrp
6. Cant install because: Update process ended with ERROR: 1"

What am I doing wrong?
 
Flacito said:
I lost my root and I cannot get it back. This is what I do:

1. Install ROM
2. Start to system
3. Reboot to recovery
4. Format data
5. Install magisk.zip in twrp
6. Cant install because: Update process ended with ERROR: 1"

What am I doing wrong?
Click to expand...
Format data before flash rom not afterwards.
 
  • Like
Reactions: Flacito
trahzebuck said:
Exactly
Click to expand...

Thanks again. However, it seems that now I cannot even start up my system, as it goes in a bootloop.
Here are my steps:
  • Wipe data
  • install MIUI 11 EU
  • (install force encryption disabler v18) -> with or without, doesn't matter; it won't work
  • install magisk
  • bootloop
Alternatively, this does not work either:
  1. Wipe data
  2. (install force encryption disabler v18) -> with or without, doesn't matter; it won't work
  3. install magisk
  4. install MIUI 11 EU
  5. no magisk installed
Maybe I'm going now offtop for the purposes of this post though...
 
Flacito said:
Thanks again. However, it seems that now I cannot even start up my system, as it goes in a bootloop.
Here are my steps:
  • Wipe data
  • install MIUI 11 EU
  • (install force encryption disabler v18) -> with or without, doesn't matter; it won't work
  • install magisk
  • bootloop
Alternatively, this does not work either:
  1. Wipe data
  2. (install force encryption disabler v18) -> with or without, doesn't matter; it won't work
  3. install magisk
  4. install MIUI 11 EU
  5. no magisk installed
Maybe I'm going now offtop for the purposes of this post though...
Click to expand...
Don't WIPE the data FORMAT data - just like you wrote ;)
 
For Poco F1, at least for me 11.0.4 seems to have been a much better (smoother scrolling and better benchmarking) version than 11.0.6. I don't know why this is the case. Since I also got the Feb patch via Google update, I'll be switching back. Just thought it was weird.
 
Hi all.
Have a question, if someone knows the answer I appreciate some help...
Yesterday I have migrated to xiaomi.eu on my lavender...
I have unlocked bootloader, installed twrp, and... I have done a backup of my entire system before installing xiaomi.eu rom...
I don't know if the fact of having selected to do a backup of efs and vendor on the same backup, have cause the problem I'm going to describe, but:

After the backup I have done all the wipes, and installed the rom... Bootloop after installation and my sdcard not recognised...

Then, formated data, installation of the rom, some hours on te configuration and now all is OK...

My question is: can I keep my backup with the efs, partition and vendor, for later use? Because I have seen, later on, than we don't need these 3 things on our backups.... And I'm afraid one day, using these backups and brick the phone...

Beside these problems, great rom... I was missing the flawless of xiaomi.eu rom since my Vince...

Thanx all.
 
thanhtho said:
Use Szaki tool to safty remove it. With android auto you need to wait developer add to the list or you can manually remove it by entering package name of its.

Warning: with release 6.9+ you need JDK 11 instead of 8

Download appropriate version here: https://github.com/Szaki/XiaomiADBFastbootTools/releases Click "Assets"
Click to expand...
Thank you for the information

And now my battery backup is way better after 3 battery drain cycles
 
How to fix ctsProfile on Magisk ? I can't use Gpay since the last release on the k20/Mi 9T

Tried many options like only core functions in magisk, changing device fingerprint or flashing gpay fix. Nothing work
 
  • Like
Reactions: Arni69
Status
Not open for further replies.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
208
Views
78K
HyperOS
sparksys98
S
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
272K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
41K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
38K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
42K
HyperOS
KGVER
KGVER
Top Bottom
Back