HyperOS 2.0 HyperOS 2.0 STABLE RELEASE


Hi everyone,
I upgraded to latest ROM on my Mondrian. First hour of usage was very buggy, very slow. But then everything worked great! Thanks devs
I only have one question: I had to re-install Magisk and now Integrity does not work anymore, I cannot use wallet. Of course I have installed the latest inject app. Perhaps I have not setup Magisk correctly. Is there a guide to cross-check the process?

Moreover I get another error "Polaris keeps stopping", not related to my problem above.
 
Last edited:
hello guys, sorry for my ignorance, I was on vacation and I couldn't follow the group. I have a Xiaomi 13 fuxi that has the stable version 1.0.13.0 of hyper os1 and I would like to update to version 2. Do I have to do a data reset or is a dirty update enough? thanks and sorry again
 
I am using Xiaomi 13 Ultra.
The phone screen does not turn on when the alarm rings. The screen is off. You have to press the power button for a long time and then turn the phone back on.
 
  • Like
Reactions: Pakino2004
davidetrivella said:
hello guys, sorry for my ignorance, I was on vacation and I couldn't follow the group. I have a Xiaomi 13 fuxi that has the stable version 1.0.13.0 of hyper os1 and I would like to update to version 2. Do I have to do a data reset or is a dirty update enough? thanks and sorry again
Click to expand...
I durty flashed my 1.0 Fuxi to 2.0 and it worked perfectly.
 
LordGlace said:
Is there any way to put the old control center? This one that looks like IOS is a huge problem for me being left handed....
I don't have the option to change it like in hyperOS 1.
Click to expand...
You can change the control center side.
Left side - control center
Right side - notifications
 
  • Like
Reactions: darki
Hi,

I've installed version 2.0.9 on Huiji about 15 times, and I've noticed there's roughly a 10% chance that Google files get installed by default. Otherwise, they don't install, or at least they aren't visible in the app list.
 
poweruser44 said:
going to say something totally baseless and crazy but.. i used to get 4h 30m screen on time (on 4g) when i was rooted with magisk on os2.0.3.0 on nuwa

the day before i did a clean install and did not flash magisk this time around, and today i got 6h 20m screen on time (on 1440p!, 4g only)... if you have magisk, try uninstalling it or clean flashing..

not to mention my banking apps just work without fuss thanks to the xiaomi.eu module too..

also my phone battery is quite depleted too, i have 430 cycles, will use it till one thousand then likely upgrade my phone, or change the battery.
Click to expand...
I don't use magisk and i am sure that the battery performance got worse after installing 2.0.11.0. Let's see if the next update solves the problem, otherwise I will try a new clean install.
 
eng333 said:
I'm on Aurora. I was using Hyperceiler and Pengeek. However, Hyperceiler doesnt fully support Android 15 and Pengeek doesnt seem to support at all.
Does any one have any suggestions for alternative modules that work well with HyperOS 2?
There's only a few options I was using: Add seconds to clock in status bar, Remove privacy dot, add battery bar to top of status bar
Click to expand...
After all this time, you've probably found a solution yourself...
In case you didn't: For Hyperceiler, the HyperOS 2.0 update was just published today (on GitHub), and there's an official Pengeek beta build that works on HyperOS 2.0 in the telegram group. Works well for me.
 
Did anyone find a solution to the WiFi problem on the X14Pro and HyperOS2? Mine seems to be related to 5GHz band mostly where signal is lost. The 2.4Ghz band seems to work ok except range.
 
botcanhga said:
difference between windows_format_data_only.bat windows_install_and_format_data.bat windows_install_upgrade.bat commands
Click to expand...
the names literally explain what it means....

windows_format_data_only.bat formats data partition only (factory reset)
Click to expand...
windows_install_and_format_data.bat for first install or clean install
Click to expand...
windows_install_upgrade.bat for updating (when you are already on Xiaomi.EU ROM)
Click to expand...
 
  • Like
Reactions: ToneLa
Hello,
I have a question, is it normal that I can't find the HyperAI feature on nuwa (Xiaomi 13 Pro)? I can only find The accessibility setting for HyperAI engine but nothing else. To my knowledge it should be available for nuwa and fuxi, at least on China rom (and xiaomi.eu is based on China rom). I hope this is just a bug, idk.
 
AlfaX said:
Hello,
I have a question, is it normal that I can't find the HyperAI feature on nuwa (Xiaomi 13 Pro)? I can only find The accessibility setting for HyperAI engine but nothing else. To my knowledge it should be available for nuwa and fuxi, at least on China rom (and xiaomi.eu is based on China rom). I hope this is just a bug, idk.
Click to expand...
xiaomi.eu

HyperOS 2.0 - HyperOS 2.0 STABLE RELEASE

@Nameless Victim By losing data, yes Is the installation method the same or does it change?
xiaomi.eu xiaomi.eu
 
Hello,
In the following image I show you the behavior of my MONDRIAN in the WIFI connection.
Each yellow mark is the time that the device is connected, so we can observe the constant interruptions.

This did not happen with HYPEROS 1.

Does anyone know what configuration I can check to solve this problem?

Thank you!


Captura de pantalla 2025-01-02 193719.png
 
You must log in or register to reply here.

Similar threads

ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
352K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
46K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
56K
HyperOS
KGVER
KGVER
ingbrzy
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
35K
HyperOS
emre_66
E
Top Bottom
Back