HyperOS 2.0 HyperOS 2.0 STABLE RELEASE


iGears88 said:
Strong is for locked bl, maybe with root, but if u don't close the bl, never get strong.

Ps don't try close the bl with Xiaomi.eu ROM
Click to expand...

I have a MI11 pro with BL Unlocked but with original firmware, and all bank apps works perfectly. We are getting problems only with xiaomi.eu Firmwares, even with NO root.
 
I'm using 14 Ultra, HyperAI Engine is available as a tab in the settings. I was making the adjustments I wanted, but now there is no HyperAI Engine. It is only in the accessibility tab and there are no settings. How can I fix it?
 
Hi all,
Will it be fine to dirty flash HyperOS 1.0 over the latest HyperOS2.0.7 - Xiaomi 14?
Since a backup with twrp can't be made, I don't want to bother with a clean install :|

reasons:
1. Been on HyperOS 2 since it rolled out but sometimes notifications are missing
2. LSPosed framework does not work with HyperOS2.0.7 - using LSPosed v1.10.1
3. Pengeek app which allows full customization of the launcher still not compatible with Android 15.
 
xMarvin732 said:
What do you mean with not working? never used the feature so i wanted to check if it works on my end
Click to expand...
Try recording 120&240 fps slow motion and play it in gallery. It won't play or show to choose the slowmotion area in the video. 960fps works fine though
 
Stoyanski said:
Hi all,
Will it be fine to dirty flash HyperOS 1.0 over the latest HyperOS2.0.7 - Xiaomi 14?
Since a backup with twrp can't be made, I don't want to bother with a clean install :|

reasons:
1. Been on HyperOS 2 since it rolled out but sometimes notifications are missing
2. LSPosed framework does not work with HyperOS2.0.7 - using LSPosed v1.10.1
3. Pengeek app which allows full customization of the launcher still not compatible with Android 15.
Click to expand...
Lsposed and Pengeek are working on my side, look for the right versions lsposed 1.9.3 (custom) I think working for me and Pengeek you can also find a "special" version working fine.

For me also no issues with notifications (dirty flashing for quite some time/versions), now on 2.0.7.0 without issues.
 
I see that hyper os 2 has been released for vermeer, will try to download and install it. btw, since i'm coming from eu hyper os 1.0.20.0, will i need to clean flash? thanks in advance

EDIT: just updated, no clean flash needed
 
Last edited:
My Mi 14 Ultra (Aurora) runs perfectly with OS2 version 2.0.8, but I miss the possibility to check for new ROM updates.
Clicking on the ROM version display under 'My device', which always led to an update search with OS1 and MIUI, has no effect under OS2. This was also the case with version 2.0.6.
Does anyone know whether the query has been moved to another location or has it simply been forgotten to include it?
 
  • Like
Reactions: carR9
Hi, i just install hyper os 2 for vermeer

few thinks to report

1) mi connect keeps force closing every few minutes, i deleted all of the data of the app but same result
2) cant change default launcher, i can choose another but xiaomi launcher remains

3) a question can i change the quick setting to the android default (combine notification and quick setting ) or this option is not available at hyper os v2


ps: dirty flash over hyper os v1

and thanks for your effort
 
You can check updates in this app
1000012238.png

cbs3000 said:
My Mi 14 Ultra (Aurora) runs perfectly with OS2 version 2.0.8, but I miss the possibility to check for new ROM updates.
Clicking on the ROM version display under 'My device', which always led to an update search with OS1 and MIUI, has no effect under OS2. This was also the case with version 2.0.6.
Does anyone know whether the query has been moved to another location or has it simply been forgotten to include it?
Click to expand...
 
  • Like
Reactions: Zolika1 and cbs3000
I have an aurora (Xiaomi 14 Ultra CN).

I suspect that I have encountered a bug or undocumented behavior while trying to flash this xiaomi.eu ROM. I suspect that the latest version of the xiaomi.eu ROM, with HyperOS 2.0, cannot be flashed onto a phone running HyperOS 1.0. devs, is this expected?

The following is what happened that prompted my suspicion.

Initially, my phone was running official CN HyperOS 1.0. I flashed the xiaomi.eu ROM of this thread using fastboot. When it rebooted, the normal boot screen very briefly flashed before the fastboot screen came back. I tried flashing again and the same thing happened, so the ROM was not working.

Through a hunch, I flashed the official CN ROM with HyperOS 2.0 and the phone booted. After that, I used fastboot to flash the xiaomi.eu ROM and this time it worked.

Has anyone managed to flash this xiaomi.eu ROM successfully over an official CN ROM with HyperOS 1.0?
 
Last edited:
alexander932 said:
does anyone know how to pass strong integrity? because i can't use some mobile banking apps. i'm new to this thing.
Click to expand...
Till now I didn't see a banking app asking for strong integrity. What app are we talking about? Majority apps require at least the to pass the device integrity, not the strong one.
 
@Syncopated If you were not using the Xiaomi.eu ROM previously, you are expected to do a clean install (I try to guess, it is not clear in your post what you did)
 
Vermeer: after an update (install_update) the poco f6 pro does not recognize the simcard anymore. Beside that the screen to type in the pin is not showing the keyboard (all black).
How to solve this?
Came from eu rom os1.0
 
Last edited:
I am using a Xiaomi 14 Pro, and after a few minutes of downloading the file to update to HyperOS 2.0, an error occurs. The file is downloaded, but the format is different from usual. Is there a way to get the download file other than through the update app?
 

Attachments

  • Screenshot_2024-12-01-08-51-50-582_com.alphainventor.filemanager.png
    Screenshot_2024-12-01-08-51-50-582_com.alphainventor.filemanager.png
    61.3 KB · Views: 120
  • Screenshot_2024-12-01-08-45-01-138_com.alphainventor.filemanager-edit.jpg
    Screenshot_2024-12-01-08-45-01-138_com.alphainventor.filemanager-edit.jpg
    170.2 KB · Views: 102
groxFR said:
Vermeer: after an update (install_update) the poco f6 pro does not recognize the simcard anymore. Beside that the screen to type in the pin is not showing the keyboard (all black).
How to solve this?
Came from eu rom os1.0
Click to expand...
didn't experience this. i also came from eu hyper os 1, specifically 1.0.20.0.
 
JiaiJ said:
@Syncopated If you were not using the Xiaomi.eu ROM previously, you are expected to do a clean install (I try to guess, it is not clear in your post what you did)
Click to expand...
I was definitely not using a xiaomi.eu ROM previously and was using the official ROM, as I stated originally, unless you are talking about another reply than https://xiaomi.eu/community/threads/hyperos-2-0-stable-release.74372/post-738254

I was also definitely using only clean install (linux_install_and_format_data.sh). A non-clean install (linux_install_upgrade.sh) on top of official ROM would be nonsensical so I thought this aspect goes without saying especially since I was not asking for help but reporting a suspected bug after finding a workaround.

I'm not sure which part you found unclear. Perhaps it was not obvious that by "CN HyperOS 1.0" I mean the official ROM from xiaomi that came with the phone, so I edited the reply to say "official CN HyperOS 1.0"
 
Last edited:
You must log in or register to reply here.

Similar threads

ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
515K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
50K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
61K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
88K
HyperOS
KGVER
KGVER
ingbrzy
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
40K
HyperOS
emre_66
E
Top Bottom
Back