HyperOS 1.0 HyperOS 1.0 STABLE RELEASE


OIs anyone else having excessive battery drain issues on their mi 11 ultra? I installed hyper OS on mine and it's simply drinking the battery, it doesn't last more than 3 hours
 
Edit, the battery is drain 11.5% per hour, with just brave, normally I am between 3 and 5%
 

Attachments

  • Screenshot_2024-11-02-02-41-59-288_com.gsamlabs.bbm.pro-edit.jpg
    Screenshot_2024-11-02-02-41-59-288_com.gsamlabs.bbm.pro-edit.jpg
    136 KB · Views: 74
Edit, the battery is drain 11.5% per hour, with just brave, normally I am between 3 and 5%
I had the same thing after a clean install. Maybe its the same after an update. Android system consumed most power, this stopped after approx 9 days and the battery life went up. Just give it some time to do its thing in the background and the battery life will be like it was. At least that is what happened in my case.
 
I had the same thing after a clean install. Maybe its the same after an update. Android system consumed most power, this stopped after approx 9 days and the battery life went up. Just give it some time to do its thing in the background and the battery life will be like it was. At least that is what happened in my case.
I go see that, I hope it's just optimisation in background
 
HELP! Peridot is not functioning after update! 1.0.17
Turns on, but pop up "system not responding" spamming. Can't connect to network, can't connect to wifi, nothing. Not a single app works. Phone keeps restarting by itself (The hyperOS 2.0 logo).. Any ideas what to do?
 
HELP! Peridot is not functioning after update! 1.0.17
Turns on, but pop up "system not responding" spamming. Can't connect to network, can't connect to wifi, nothing. Not a single app works... Any ideas what to do?
Did you try this?


Sent from my 2210132G using Tapatalk
 
Did you try this?


Sent from my 2210132G using Tapatalk
Everything went as success besides the error at the very end "Error: Unable to get package com.miui.miwallpaper.snowmountain" after the first command.
System launcher isn't responding...
edit: ton of pop ups that apps stopped working like google services, system launcher, etc.
 
Everything went as success besides the error at the very end "Error: Unable to get package com.miui.miwallpaper.snowmountain" after the first command.
System launcher isn't responding...
Try to reflash the ROM from fastboot

Sent from my 2210132G using Tapatalk
 
Try to reflash the ROM from fastboot

Sent from my 2210132G using Tapatalk
Again same. This time got warrning "skipped copying due to sparse image". Then went to fastboot via adb reboot fastboot. Reflashed again without the warning. Sadly everything is remains the same... "Camera keeps stopping", "System aluncher keeps stopping" etc.

edit: tried your previous comment with those adb commands, now i get error "CMD: Failure calling service package: Broken pipe (32)". Not sure if that has anything to do with my problem..
 
Again same. This time got warrning "skipped copying due to sparse image". Then went to fastboot via adb reboot fastboot. Reflashed again without the warning. Sadly everything is remains the same... "Camera keeps stopping", "System aluncher keeps stopping" etc.
Just a random thought since you mentioned the sparse image error, but are you using KernelSU by any chance? If yes try to rename
/data/adb/ksu and reflash rom.
If you are not using KSU ignore my comment


Sent from my 2210132G using Tapatalk
 
Just a random thought since you mentioned the sparse image error, but are you using KernelSU by any chance? If yes try to rename
/data/adb/ksu and reflash rom.
If you are not using KSU ignore my comment


Sent from my 2210132G using Tapatalk
Sadly no, not rooted..
edit: phone restarted again by itself and even though it still pops some errors about apps that keep stopping, it works now. Some apps now work, but problem remains...
thank you @stathis95194 for your help!
 
Last edited:
You run those right? Not from fastboot from cmd while phone is on cable with USB debugging enabled

You run those right? Not from fastboot from cmd while phone is on cable with USB debugging enabled

adb shell pm compile -a -f --full
adb shell reboot

Sent from my 2210132G using Tapatalk

adb shell reboot

Sent from my 2210132G using Tapatalk
Yes, everything went good and got an error at the end "Error: Unable to get package com.miui.miwallpaper.snowmountain"
 
Yes, everything went good and got an error at the end "Error: Unable to get package com.miui.miwallpaper.snowmountain"
Is snow mountain the wallpaper you are using? Can you disable it? Maybe there is an issue there. Or the phone is not functioning at all?
I don't have any other ideas, maybe someone with more knowledge can chime in and help

Sent from my 2210132G using Tapatalk
 
  • Like
Reactions: saf.oda
Is snow mountain the wallpaper you are using? Can you disable it? Maybe there is an issue there. Or the phone is not functioning at all?
I don't have any other ideas, maybe someone with more knowledge can chime in and help

Sent from my 2210132G using Tapatalk
I disabled it right away (edit: restarted the phone one more time, the wallpaper comes back. Can't get into wallpaper options to change it, it closes right away...). Phone is functioning partly. Keyboard keeps stopping, "permission keeps stopping" etc. Can make call and connect to a wifi unlike in the beginning, but still it's not working fully... Thank you very much for your recommendations!
 
Hi, I have a Redmi Note 13 NFC Sapphiren.

I just need to know if, apart from the Rom, it is mandatory to install the GPay module to be able to make payments with my phone or is it enough with a clean installation of the Rom?

Or:

Is the GPay module installed from the Recovery (I have OrangeFox) after installing the clean Rom and no Wipes are needed, right?

Thank you very much in advance!
 
HELP! Peridot is not functioning after update! 1.0.17
Turns on, but pop up "system not responding" spamming. Can't connect to network, can't connect to wifi, nothing. Not a single app works. Phone keeps restarting by itself (The hyperOS 2.0 logo).. Any ideas what to do?
That's strange, I flashed my POCO F6 with 1.0.17 and all went smoothly.
Did you try to download the firmware again, it might be corrupted.
Once downloaded, check its MD5 hash to be sure it did not get corrupted during download.
Then update your device using Fastboot with one of the .bat files provided in the .ZIP file.

Good luck.
 
Hi, I have a Redmi Note 13 NFC Sapphiren.

I just need to know if, apart from the Rom, it is mandatory to install the GPay module to be able to make payments with my phone or is it enough with a clean installation of the Rom?

Or:

Is the GPay module installed from the Recovery (I have OrangeFox) after installing the clean Rom and no Wipes are needed, right?

Thank you very much in advance!
Its just an apk with fresh unbanned fingerprint. You just download it and update it by clicking on it.
 
  • Like
Reactions: Rotofonfedro
On peridot, 11% in 42min with 40min of screen on, the battery drain by android system is massif
Oh yes Gsam Battery Monitor Pro sounds like abandonware I can trust

Jokes aside, what would you consider a normal drain under those circumstances? I mean how much battery do you expect to be consumed?
 
  • Like
Reactions: Smaritz
Good day gents. I am running 13 Ultra (Ishtar) and it has always bothered me, but how to actually keep all the camera filters on?
 
Like darki said, a forum is not a single thread. There has to be an order so that the forum doesn't turn into a "general discussion chatroom".
You can choose to ignore what I said and have your comments consistently deleted, it's up to you.

It seems like you didn't recognize this forum has more areas than just the ROM release area.
true, but any discussion pertinent to the use of the rom is important to facillitate user growth and knowledge, as well as, the growth of this site which makes money from advertising money. If users are gone, what happens to the advertising income?
 
true, but any discussion pertinent to the use of the rom is important to facillitate user growth and knowledge, as well as, the growth of this site which makes money from advertising money. If users are gone, what happens to the advertising income?
I don't get your point, the whole forum is here to help the users, it is still not a good reason to put all the random "useful" topics in the install thread.
 

Similar threads

Replies
51
Views
45K
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
54K