HyperOS 1.0 HyperOS 1.0 STABLE RELEASE


FlexWheeler said:
guys, i'm so scared help me. After flashing OS1.0.13.0.UNRCNXM stable on my Poco X6 global, I noticed I have no signal data.
I cannot use my phone on the go. No signal. How to solve this???
Click to expand...
xiaomi.eu

Fix Networks for GARNET

Mobile sees the SIM but you have no signal?nal? Download this package: Garnet_modem_global_A14 HyperOS 1.0 Garnet_modem_global_A15 HyperOS 2.0 Installation in fastboot: 1. Unzip the ZIP file on the PC 2. Connect the mobile phone in fastboot mode to the PC 3. Run the modem installation with the...
xiaomi.eu xiaomi.eu
 
gogocar62 said:
xiaomi.eu

Fix Networks for GARNET

Mobile sees the SIM but you have no signal?nal? Download this package: Garnet_modem_global_A14 HyperOS 1.0 Garnet_modem_global_A15 HyperOS 2.0 Installation in fastboot: 1. Unzip the ZIP file on the PC 2. Connect the mobile phone in fastboot mode to the PC 3. Run the modem installation with the...
xiaomi.eu xiaomi.eu
Click to expand...
oh my god! it worked! thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I was so afraid of loosing life stuffs 'cause phone didn't have signal !! now I can run out thanks
 
  • Like
Reactions: katerpanne
before you replied me, i did "fastboot flash boot modem.img" ...but it didn't solve my issue. Modem.img file was in xiaomi.eu_GARNET_OS1.0.13.0.UNRCNXM_14.zip .zip file, it's where I found it. Some weird orange screens were at booting then it booted regulaly. Hope i didn't mess up with something. It looks like it is working right now without any crash due to that modem file boot on flashboot by me. I also rooted it. If I wanted to update HyperOS firmware, how can I do that without messing up with Magisk installed?
 
update to Poco F5 (Marble) does not work.
I get an update displayed. Download the update. Then select update package at the top. Then the message “Start recovery. It starts in TWRP but nothing happens there at first.
If I then go to install I get to a file manager but the file is not displayed there.
I can't copy the file to the root directory because I don't have root.
Next I tried to start in fastboot.
Started. PC connected via USB and selected the Windows update version. No reaction.
I also had problems like this with the last update. But I can't remember how.

Translated with DeepL.com (free version)
 
gyr0ray0 said:
What do you mean by "fast battery drain after reboot"?

Your battery dropped from 100 to 0?
Click to expand...
From 50% down 20% for just a couple of seconds without open apps. Just Android Systems who really eats the battery. Sorry I can't attached the screenshot. I don't know why it is disabled the option to post it here
 
Last edited:
How can i fix this issue?
I was trying to flash xiaomi.eu_GARNET_OS1.0.13.0.UNRCNXM_14.zip via fastboot.
 

Attachments

  • Cattura.PNG
    Cattura.PNG
    143.6 KB · Views: 202
Xiaomito said:
Hi, would you recommend HyperOS for MI10Pro (cmi)?
Which are the main issues/bugs with with this phone?
Thanks in advance.
Click to expand...
Did it a few weeks ago (just search for my posts in this thread). Works fine for me. Can't see any impact on battery life or functionality.

There is just one issue without any solution in sight and not even the guys hear can help me with it: Dual Apps connecting via Bluetooth are not working anymore.

I wouldn't do it again, but there's no way back without data wipe.
 
i don't know why when i try to update xiaomi 13 fuxi 1.0.17.0 it sais waiting for device and it's stucked like this. the pc sees the phone in fastboot mode. first time when happens this
 
der-mann-vom-mond said:
update to Poco F5 (Marble) does not work.
I get an update displayed. Download the update. Then select update package at the top. Then the message “Start recovery. It starts in TWRP but nothing happens there at first.
If I then go to install I get to a file manager but the file is not displayed there.
I can't copy the file to the root directory because I don't have root.
Next I tried to start in fastboot.
Started. PC connected via USB and selected the Windows update version. No reaction.
I also had problems like this with the last update. But I can't remember how.

Translated with DeepL.com (free version)
Click to expand...
Update with fastboot in Win works fine.
Open command prompt on your windows PC
go to the directory of your unzipped Rom
start the .bat file you need
 
Hello
Xiaomi 13 pro
Unable to download "xiaomi.eu_NUWA_OS1.0.15.0.UMBCNXM_14"
the download says "virus detected" what can I do to overpass this ?
Thank you
 
miccao said:
Hello
Xiaomi 13 pro
Unable to download "xiaomi.eu_NUWA_OS1.0.15.0.UMBCNXM_14"
the download says "virus detected" what can I do to overpass this ?
Thank you
Click to expand...
I downloaded and installed it this morning without any problem.
Have you downloaded it from the browser or from the update app?
 
gogocar62 said:
These commands are entered while the device is running. Not via fastboot.
They are ADB commands.
Code: 
adb shell pm compile -a -f --full
adb shell reboot
The "USB debugging" and "USB debugging (Security settings)" functions must be enabled in the "developer options" settings.
Click to expand...
You hero, saved my day (and phone from wiping data). I've tried to upgrade 11 Ultra (star) from 1.0.3.0 to 1.0.6.0 in twrp and had sim cards disconnecting. And made stupid mistake trying to install back to 1.0.3.0, where flash system broke (wrong user password in twrp, phone boot up, but apps and settings cannot work). After reflashing in fastboot mode to 1.0.6.0 sim cards still was reconnecting, screen brightness was blinking and this adb compile command looks like fixed phone to normal. Is it bad, that some compile processes failed? Like:
[com.xiaomi.bluetooth] Failure
[com.android.vending] Failure
 
Last edited:
Hi all. I have a stupid question.....If I want to factory reset my CN Xiaomi 13 Pro with latest stable .eu Rom....How do I do that? Reflash the Rom again in fastboot or just click the factory reset button in the settings menu? I don´t have TWRP installed. Thanks!
 
kekec01 said:
Hi all. I have a stupid question.....If I want to factory reset my CN Xiaomi 13 Pro with latest stable .eu Rom....How do I do that? Reflash the Rom again in fastboot or just click the factory reset button in the settings menu? I don´t have TWRP installed. Thanks!
Click to expand...
You can via the settings menu, or flash again like clean install
 
How fix it?
Fuxi last update non-root
Xiaomi interconnectivity
 

Attachments

  • Screenshot_2024-10-30-04-59-57-077_com.miui.home.jpg
    Screenshot_2024-10-30-04-59-57-077_com.miui.home.jpg
    426 KB · Views: 299
Last edited by a moderator:
sayloure said:
How fix it?
Fuxi last update non-root
Xiaomi interconnectivity
Click to expand...
You can't fix it.
xiaomi.eu

Frequently Asked Questions

This is a collection of frequently asked questions and our answers. It will be updated from time to time as more questions are being asked repeatedly. If you asked any of these questions again, don't be surprised if someone redirected you here. Are there changelogs for Stable ROMs? No, each...
xiaomi.eu xiaomi.eu
 
You must log in or register to reply here.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
2K
Views
903K
HyperOS
stathis95194
stathis95194
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
431K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
53K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
47K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
70K
HyperOS
KGVER
KGVER
Top Bottom
Back