HyperOS 1.0 HyperOS 1.0 STABLE RELEASE


panjaksli said:
Would not recommend on Poco F3... The Dolby presets are completely gone, and so is the audio quality. Also tends to hang randomly.
Click to expand...
Same on 12x. Except it didn't hang. The "mark as read" option in messaging app is missing, unimportant notifications option is missing. A lot of stuff is missing only to be able to personalize the lock screen. It sucks. Went back to MIUI 14 and immediately saw huge battery increase
 
panjaksli said:
Would not recommend on Poco F3... The Dolby presets are completely gone, and so is the audio quality. Also tends to hang randomly.
Click to expand...
Also forgot to mention... Dynamic refresh rate is totally broken. It runs at 120Hz and doesn't drop even when the screen is stationary, and then when using PIP the screen runs at 60Hz and instantly switches to/from 90 Hz when touching the screen... The colors are totally off because the display is not calibrated for 90Hz.
 
  • Like
Reactions: WontedDiscovery
ingbrzy said:
Status: RELEASED

68747470733a2f2f692e696d6775722e636f6d2f44424566616e712e706e67


RULES WHEN POSTING
1. If a ROM is not published DONT ASK ABOUT ITS ETA
2. If a ROM is not published DONT ASK why!
3. If a ROM is available, download it and use it
4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed
5. If you use any form of abusive or derogatory language to admins or other users you will be BANNED forever!
6. If you quote whole first or second post, your post will be deleted and ignored
7. We do not own all supported devices, so in case of issue, post log to be able fix it
8. Only posts in English language are accepted

Full rules here: https://xiaomi.eu/community/threads/rom-release-thread-rules-final-warning-of-bad-conduct.51332/

DOWNLOAD STABLE
https://sourceforge.net/projects/xi...xiaomi.eu/HyperOS-STABLE-RELEASES/HyperOS1.0/

Xiaomi.eu GPay Module download
https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/Xiaomi.eu-app/

devices_stable_os1_24041613.png


Requirements:
  • Your device's bootloader must be unlocked.
Installing with Fastboot:
  • Download Xiaomi.eu ROM zip file
  • Extract the ROM zip to a new folder
  • Power off your device
  • Boot your device in Fastboot mode (Hold volume down + power buttons)
  • Connect to PC via USB cable
  • Run one of the installation scripts (according to your PC operating system):
    - first_install_with_data_format - with data wipe, if you're flashing Xiaomi.eu ROM for the first time or downgrading.
    - update_rom - without data wipe, if you're updating from an older Xiaomi.eu ROM.
  • Done!
Installing with TWRP:
(TWRP must be installed with Fastboot mode)
  • Download Xiaomi.eu ROM zip file
  • Reboot to TWRP
  • If installing for the first time or downgrading: Wipe -> Format Data
  • Copy the ROM zip file to the internal storage
  • Install -> Select the ROM zip file
  • Reboot to system
  • Done!
Updating via Updater app:
(A Xiaomi.eu ROM and TWRP must already be installed on your device)
  • Download Xiaomi.eu ROM zip file
  • Copy the ROM zip file to the internal storage
  • Updater -> Menu (...) -> Select update package
  • Select the ROM zip file
  • Confirm any dialogs
  • Done!
Remember:
If you are going from HyperOS Weekly ROM to HyperOS Stable ROM, you are doing a downgrade, so format data is mandatory!

Translators:
  • Follow XML changes in Source of HyperOS here
  • Our translation guide is here
  • Check for errors in your repo here
Give kudos to your translators. This is a huge group effort and continues to grow bigger!

Language included in our HyperOS 1.0:
Notes:
  • HyperOS Changelog + See CHANGELOG for your language...
  • Our ROMs were approved by official EU distributor ABC Data to not void warranty for devices sold by them!
  • (Of course, officially unlocked BL and no ROOT installed)
Our ROMs features (what's not in Global):
  • Based on China Beta builds
  • 3way reboot menu (in dev settings)
  • HyperOS Contacts and Dialer
  • Removed ads in HyperOS system apps
  • HyperOS Dialer and Messages apps
  • Steps counter in Assistant screen
  • More shortcuts on left lockscreen
  • Wake up gestures for all devices
  • Option to auto-expand first notification
  • Notifications priority settings
  • More edit options in Gallery app
  • Enabled MiDrive in File Explorer
  • Google apps support integrated
  • Removed 5GHz region restrictions
  • Confirm dials from call logs
  • Morning report on alarm at morning
  • More apps supported for AOD notifications
  • More styles for AOD screen
  • Raise to wake gesture
  • AOD notification received animation
  • Tap fingerprint sensor to wake toggle
  • Double tap to lock screen
  • Battery AI scenes
  • Allowed disabling specific system apps
  • Importing theme .mtz from zhuti.xiaomi.com via ThemeManager
  • No useless Chinese bloatware apps
  • More free RAM due to less background processes
  • Mi Video, Mi Music, Mi Browser: No any useless Chinese content and ads
  • No possibility to re-lock bootloader accidentally with flash any xiaomi.eu release
  • Added real 27 languages translation made by Official MIUI Fansites and MIUI Fans
  • Added EU T9 dialer support
  • Added charging sound switch
  • Optimized GPS settings for EU
  • Optimized Battery consumption
  • Optimized RAM consumption
  • Added GSMalphabet into SMS app options
  • SafetyNet passed by default without ROOT (Google Pay)
  • Play Store Certified
  • Deodexed
  • Added automated tasks in Security app
  • Widevine L1 (for supported devices)
  • And more, and more made by our 12 years mods experience.
Click to expand...
Gentleman/Expert, I am newbie in this forum. For your information i am Xiaomi/Redmi fans since Redmi Note, till then keep upgrading and recently bought Redmi Note 13 pro, unlikely is Chinese version instead, i am struggling to get local (Malaysia) support to change my ROM to global version so i can use it, since seller refuse for refund, is due to my negligence. Therefore, i hope you guys are expert might can support/help guide to convert my OS to global version. do help and guide me step by step so can do it well without spoiling the newly purchased phone. Enclosed with attachment my phone detail. Million of thanks for support and helps.
 

Attachments

  • WhatsApp Image 2024-04-28 at 2.32.08 PM.jpeg
    WhatsApp Image 2024-04-28 at 2.32.08 PM.jpeg
    59.1 KB · Views: 225
shade8055 said:
Gentleman/Expert, I am newbie in this forum. For your information i am Xiaomi/Redmi fans since Redmi Note, till then keep upgrading and recently bought Redmi Note 13 pro, unlikely is Chinese version instead, i am struggling to get local (Malaysia) support to change my ROM to global version so i can use it, since seller refuse for refund, is due to my negligence. Therefore, i hope you guys are expert might can support/help guide to convert my OS to global version. do help and guide me step by step so can do it well without spoiling the newly purchased phone. Enclosed with attachment my phone detail. Million of thanks for support and helps.
Click to expand...
First of all you will have to unlock your bootloader. You have a complete guide for HyperOS XiaomiEU ROM in the first post of this thread.
 
  • Like
Reactions: shade8055
@shade8055
1. To start with, your post violates rule number 6, so always read before you write.
2. Everything you need is in the quoted post. There are also further descriptions in the forum. So please use the search function.
 
  • Like
Reactions: shade8055
Looks like I'll be going back to miui 14, I have Mi 11 did clean install of hyperos I've had it over a week the battery drain is too much tried to live with it and hope for update but having to charge twice a day is too much also it's reducing the battery lifespan

Performance wise not noticing any difference between miui 14 or hyperos, maybe I'll try again later when hyperos gets further updates and battery drain is fixed
 
SuleymanYunus said:
MAGISK
1 - Install Magisk Apk.
2 -Patch the init_boot file from Magisk.
3 - Change the file name. magisk_patched_boot.img
4 - Command: fastboot flash init_boot magisk_patched_boot.img
5 - We open Magisk and click install directly.
Click to expand...
xiaomi 12s pro still is 1.04 version now, no 1.0.9 version. 1.0.3 is nromal, but i can't rebcak old version.
 
Fuxi 1.0.7. I cannot share anything via file manager. None of the sharing buttons in this page works. Has anyone met this bug?
IMG_20240428_210114.jpg
 
Hi everyone, I wanted to ask if anyone knows how to enable notifications on Poco F5 Pro Mondrian. It's not possible that I no longer receive any notifications. I checked all the various settings and everything is enabled. thanks to those who answer me.
 
Iljapo said:
If anyone is interested, I've resolved this by myself. The Settings > "More connectivity options" > NFC > Secure element position > "Embedded secure element" had to be changed to "HCE Wallet". I have no idea what does it mean, but mobile banking app's NFC payment started working. Haven't yet tested GPay though.
Click to expand...
That worked on my F4 , thanks a lot !
 
Since I installed the EU operating system, I cannot log in to WhatsApp. The app thinks it's fake. I don't know if this is a security issue or a completely individual problem. The phone I use is Xiaomi 14 ultra. I would be happy if you help. If anyone knows how to overcome this error, that would make me very happy.
 
Iljapo said:
Hi,

Not sure if this is a generic issue or related to this update, but I successfully did a dirty upgrade from last stable MIUI 14 to latest HyperOS for Xiaomi 12X. All looks well and works smooth so far, except NFC. Both GPay and Banking app NFC stopped working. It shows error on payment terminals and waking nothing on the phone.

In Google Wallet there is no "missing requirements" popup as GPay fix was applied. Hence even with thst error banking app NFC worked well previously.

Any ideas? Didn't find anything here in the forum NFC related for HyperOS.
Click to expand...
How's the battery life on your 12x?
 
MeiGuddet said:
@shade8055
1. To start with, your post violates rule number 6, so always read before you write.
2. Everything you need is in the quoted post. There are also further descriptions in the forum. So please use the search function.
Click to expand...
Thanks MG, anyway still a newbie for this forum, to catch up and reads all info that i require
 
Hello i want to ask, everytime i playing pokemon go with AR feature the game didnt detect the camera / not detect the google AR core, and then will be crash.
I attach the log.
Alr uninstall then install again the ar core still the same.
Any solution? Thankyou verymuch.
 

Attachments

  • Screenshot_2024-04-29-00-30-27-518_com.miui.bugreport.jpg
    Screenshot_2024-04-29-00-30-27-518_com.miui.bugreport.jpg
    827.5 KB · Views: 168
You must log in or register to reply here.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
962
Views
396K
HyperOS
iGears88
iGears88
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
341K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
45K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
54K
HyperOS
KGVER
KGVER
Top Bottom
Back