Mali2
Members
- 3 Jan 2017
- 244
- 67
Umi (Mi 10), stable 1.0.3.0 works without issues (>24h) after dirty flash with twrp 8.6. Thank you!
Thank you for your fast answer. Do you know what is the difference between twrp-3.7.1_12-v8.6_A14_FBEv2-umi-skkk.img and twrp-3.7.1_12-v8.6_A14-umi-skkk.img ? I could not find any info at the download page. I am also a bit confused about the naming of the v8.6_A14 TWRP. I thought I should use a TWRP for android 13, because the HyperOS for Umi is based on android 13. Is the A14 TWRP compatible to lower versions? Thanks again for your help, but this just confuses me a bit.
Yes, you have to install TWRP after flashing the ROM.I have Mi11 and currently have TWRP installed for A13, if I install hyperos using Fastboot first_install_with_data_format will this also remove twrp thats already installed,
I want to do clean install with hyperos
Mmm, everytime i asked in past it was "no upgrade from weekly to stable" (MiUI14), OP says "...from Hyperos weekly to stable" (not MIUI14 to Hyperos), but last time i asked someone said from MIUI14 to HyperOS it will be an upgrade, so its possible to upgrade. So i think you are wrong here, btw, clean install is always better, but i never had any problems with upgrade installation in past.Read always carefully the OP before upgrade .EU ROM
The answer is that you SHOULDN'T upgrade from Weekly to Stable without FORMAT
HyperOS 1.0 - HyperOS 1.0 STABLE RELEASE
RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of abusive or...xiaomi.eu
FBv2 je určena pro AOSP ROM. You can also use TWRP A13.Thank you for your fast answer. Do you know what is the difference between twrp-3.7.1_12-v8.6_A14_FBEv2-umi-skkk.img and twrp-3.7.1_12-v8.6_A14-umi-skkk.img ? I could not find any info at the download page. I am also a bit confused about the naming of the v8.6_A14 TWRP. I thought I should use a TWRP for android 13, because the HyperOS for Umi is based on android 13. Is the A14 TWRP compatible to lower versions? Thanks again for your help, but this just confuses me a bit.
Hello, what friend would like to ask you if you did the installation from miui 14 to hyperOs in dirty using twrpThanks to the Devs for the latest HyperOS Update on Munch. Works without problems as always
am i not supposed to rename the rom etc, please can you be more specificUpdate from MIUI 14 07.17 version for VENUS worked. View attachment 52463
typed "cmd" after powershell box opened, then typed "windows_fastboot_update_rom.bat" and hit enter. see attachment
Thanks to the Devs for the latest HyperOS Update on Munch. Works without problems as always
Munch F4 updated using twrp all good
Hello, how are you, greetings, I wanted to ask you if the update that you did was done dirty using twrp since I am on the latest 1014 stable and I want to update to the first one of hyperOs and I wanted to know if everything was fine, that is, if it worked for you No problem since I also want to do it but I want to be sure that everything goes well. I appreciate your response, thank you.Munch F4 updated using twrp all good
you dont have to rename anything ... here is an older detailed how toam i not supposed to rename the rom etc, please can you be more specific
Yes I updated from the last miui 14 .EU stable with twrp. All looks okay so far. NFC card payments seem okay to, I didn't need to reinstall anythingHello, how are you, greetings, I wanted to ask you if the update that you did was done dirty using twrp since I am on the latest 1014 stable and I want to update to the first one of hyperOs and I wanted to know if everything was fine, that is, if it worked for you No problem since I also want to do it but I want to be sure that everything goes well. I appreciate your response, thank you.
itsyou dont have to rename anything ... here is an older detailed how to
https://xiaomi.eu/community/threads/howto-install-fastboot-image.64508/
its a whole lot to do with, please can you tell me how to overcome the twrp internal storage not showing errors when formatting data on twrp since i am used to flashing via recoveryyou dont have to rename anything ... here is an older detailed how to
https://xiaomi.eu/community/threads/howto-install-fastboot-image.64508/
I'm using it for daily usage and seems very stable, like MIUI 14POCOF3
Have anyone tried HyperOS?
Is stable enough to use?
Thanks
Does not work SMS. Updated from stable Miui 14 from Xiaomi.eu. The phone has two SIM cards. Wherein Sms doesn't work in both. At the same time, everything is in order with SIM cards: Calls and mobile Internet work correctly and without errorsPOCOF3
Have anyone tried HyperOS?
Is stable enough to use?
Thanks
Mine works Mi 11 Venus and Google Messages app. The OS is very stable and everything works.Does not work SMS. Updated from stable Miui 14 from Xiaomi.eu. The phone has two SIM cards. Wherein Sms doesn't work in both. At the same time, everything is in order with SIM cards: Calls and mobile Internet work correctly and without errors
I am adding to my answer: The application was installed on the phone "Sms From Google" . I forcibly installed the standard application as the default application and everything worked.
You have to extract the contents of the zip file to access the update.bat and run it. Do not flash the zip file, that won't work. Need to extract and run the windows_update bat fileam i not supposed to rename the rom etc, please can you be more specific
Sorry for quoting myself, but as nobody has an answer i gave it for myself ;-) Installed Hyperos on my phone via fastboot (with some errors, but i think that was a bad cable...works at 3nd try...), then booted into twrp and voila, there is latest twrp.....didn't install it so its inside the ROM zip.Hi, first many thanks for bringing HyperOS to Mi11 Ultra. Just a little question: I remember that with MIUI14 latest TWRP was inside the flashable zip, so that even with installing via fastboot we had latest TWRP without flashing that after. So it was easy to just boot to TWRP after flashing and flash magisk. Is it same now or do i have to boot latest A14 TWRP with fastboot and then install magisk (and twrp with "install to recovery ramdisk" ) ? Thx
it depends on your device… use fastboot as I have described in the how to. I think everything is described.its
its a whole lot to do with, please can you tell me how to overcome the twrp internal storage not showing errors when formatting data on twrp since i am used to flashing via recovery
This definitely shows you didn't read anything. The last 3 or 4 pages are full with this.Hey, I'm trying to look through the replies but haven't found anything related.
…
We use essential cookies to make this site work, and optional cookies to enhance your experience. Cookies are also used for ads personalisation