MULTI 7.2.9


Do you like this MIUI version?

  • Total voters
    362
Status
Not open for further replies.
Leron said:
There is no need to flash official rom,
maybe you can see in developer options for USB debugging and oem unlock. Otherwise you can try to see if there is an update version of miunlock

Inviato dal mio MI 4S utilizzando Tapatalk
Click to expand...
I already check the oem unlock and usb debugging and its on.. and im sure i have latest version. In past time i did unlock with unofficial ways. And now i have a permission. Is that matters?

Sent from my MI 4S using Tapatalk
 
Gospodar said:
Hello.
I have Mi4C. I have updated to Android 7 on Friday - version that is very fast draining my battery. I would like to update to reuploaded versions, but when I try to instal TWRP I can not: FAILED (remote: Partition flashing is not allowed). Ok, bootloader is locked. I try to unlock it. The program stops at 50% - Could not verify the device - current account is different from the account info on the device ( the account is the same, I have checked). I Put it the phone in developers mode, put the find device on... I do not know Why does is not work?
For unlocking: When I go to web page for unlock my device, when I enter all my data, I click that I confirm for accepting disclamer, but when I click apply now, nothing happens as the page does not work. I tried in diferent browsers and diferent computers. How can I unlock the device? Or how can I put the new version of ROM on my phone? Thank you.

Regards
Click to expand...
You should wait next update in this Friday for any improvement becuz this is the first update on 7.0...
 
grivam said:
  1. FOLLOW THIS GUIDE STEP BY STEP FOR UNLOOCK
  2. After you have recived xiaomi SMS download last gobal rom from xiaomi in your smartphone and flash this new ROM .zip using Updater app
  3. go to https://i.mi.com/ and disable your devices
  4. Don't set up the Wireless network and Mi Account on first boot
  5. After initial setup turn on Developer options, then turn on USB debugging and OEM unlocking
  6. Reboot the phone
  7. Set up the wireless network
  8. Go to Developer options > Mi Unlock status and click on Add account and device then set up Mi Account using account Id (accept every pop-up)
  9. Reboot into fastboot and try to unlock your phone by MI FLASH UNLOCK TOOL V1.1.0317.1
  10. enjoy
Click to expand...
Why not to set up wireless and mi account in first reboot?

Sent from my Redmi Pro
 
betsou said:
Is there a solution for the Mi4c owners stuck in this situation ? Maybe a Windows 10 bug, i read at the miui forums
Click to expand...
You need a Windows 64 bit computer. If the drivers are not correctly installed, you can't unlock
 
pablotomate said:
One question. Do I have to flash the 7.2.9 release before ask miui for unlock my bootloader? I mean, I am in 6.12.20 yet with unlocked boot. May I have to lock the bootloader before they give me permission to unlock?

XIAOMI MI4C
Click to expand...
Yes, first install Nougat rom and then ask for unlock

Enviado desde mi Mi-4c mediante Tapatalk
 
Noob question.

3 days ago I got Mi Max 32gb and today got an sms with approval for unlocking bootloader. I want to install xiaomi.eu nougat rom.

Questions:

1. After I install .eu Rom, will my bootloader become locked again (re-locked) or not?

2. Phone came with Android 6.0.1, miui8 stable 8.1.6.0. I just need to flash twrp and then install .eu Rom?

In the past I have been using .eu rom on RN2 but confused with locked bootloader.

Thanks for the help.
 
hi

just installed yesterday, the first issue i have , i cannot send voice message via Whatsapp, i don't know if this is a Miui issue or Whatsapp issue... but on previous version (8.2 - 5.1.1) it was working just fine...

And the rest is just fine, faster !
 
  • Like
Reactions: Morvarid
umutkoyun said:
hi

just installed yesterday, the first issue i have , i cannot send voice message via Whatsapp, i don't know if this is a Miui issue or Whatsapp issue... but on previous version (8.2 - 5.1.1) it was working just fine...

And the rest is just fine, faster !
Click to expand...
First active it in auto start if doesn't work yet,then check battery saver and choose no restriction

Sent from my Redmi Pro
 
Desmond said:
You need a Windows 64 bit computer. If the drivers are not correctly installed, you can't unlock
Click to expand...
I have an 64 bit Windows 10.
I think I have the drivers correctly installed. Is ther an "official" set of drivers for the mi4c ? I have the windows update driver that reconize perfectly the phone.
 
Morvarid said:
First active it in auto start if doesn't work yet,then check battery saver and choose no restriction

Sent from my Redmi Pro
Click to expand...


already activated in auto start and i have no battery saver set on... and as above, i guess it's a rom bug issue too...
 
betsou said:
I have an 64 bit Windows 10.
I think I have the drivers correctly installed. Is ther an "official" set of drivers for the mi4c ? I have the windows update driver that reconize perfectly the phone.
Click to expand...
your phone is correctly recognized by "adb devices" command?
 
  • Like
Reactions: Morvarid
pazdir said:
Hi all, I have a question regarding RN 3 pro (kenzo version) to all who tried the latest EU weekly rom:
Can anyone confirm that when you touch the fingerprint of the phone, it wakes up the screen? In previous EU roms, that excellent feature disappered about 2 months ago!
Click to expand...
Install 7.2.9 version last friday: No problem with fingerprint ! Work well with my configuration : 4 fingerprint profiles !
 
Zeciklon said:
Noob question.

3 days ago I got Mi Max 32gb and today got an sms with approval for unlocking bootloader. I want to install xiaomi.eu nougat rom.

Questions:

1. After I install .eu Rom, will my bootloader become locked again (re-locked) or not?

2. Phone came with Android 6.0.1, miui8 stable 8.1.6.0. I just need to flash twrp and then install .eu Rom?

In the past I have been using .eu rom on RN2 but confused with locked bootloader.

Thanks for the help.
Click to expand...

1. After install .eu Rom on Mi MAX bootloader status NOT changed.
 
akhter rasool said:
Xiaomi.eu people please please do something for VoLTE network issue really I am waiting for this rom
Click to expand...
Can I suggest instead of just asking, you do some research, collect logs using Netwok Signal Guru ( requires rooted device), and provide information as to where in the VoLTE setup/config the service is failing?

The VoLTE "domain" is a large block in the code, and if you provide guidance as to what is the failure at a network level, it makes fixing it so much quicker.

Also it is an "EU" ROM, not for Indian Jio network, so do not expect someone to fly to India for a connection and analysis, collect the traces yourself and contribute to the fix.
 
  • Like
Reactions: George TIU and ingbrzy
Hello. On any assembly is not working X-431 Pro3 application (freezes on the home screen), in what could be the problem
 
Status
Not open for further replies.

Similar threads

ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
245K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
41K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
36K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
38K
HyperOS
KGVER
KGVER
ingbrzy
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
32K
HyperOS
emre_66
E
Top Bottom
Back