HyperOS 1.0 24.4.15/16
- Thread starter ingbrzy
- Start date
- Status
desire1504
Members
- 22 Oct 2020
- 138
- 40
liteboy0906
Members
- 31 May 2023
- 9
- 15
if i choose chinese as system language for the first startup, although i choose gesture navigation mode , but after i enter launcher the navigation mode is three button!
if i choose english , there is no problem!
if i choose english , there is no problem!
I've a problem. I'm Italian. Phone App, Sms app and updater app are in English. Why? Before there last 2 update apps were in Italian. Thanx
I'm pretty new here and i'm flashing this rom on my xiaomi 12s for the first time, wish me luck.
gogito
Members
- 28 Mar 2024
- 73
- 20
No matter whether I try with the updater or boot directly via TWRP. This time I cannot select the zip file during the update. Even if I select the zip file with the updater and restart the system. In recovery mode, the zip file is no longer available because only the internal storage is displayed. Previously I was always able to select the zip file. Does anyone have any tips?
(Xiaomi 13 Pro, NUWA)
(Xiaomi 13 Pro, NUWA)
gogocar62
XM12 Tester
- 22 Apr 2021
- 5,074
- 322
Yes it is. For XM 14/14 Pro, sometimes after installing the ROM via fastboot, the device ends up in a bootloob. If TWRP is installed first and then the ROM is installed again via fastboot, everything is fine.
You need to update TWRP.
Thanks for the quick reply!
My TWRP version is 3.7.0_12-Xiaomi13Pro_v7.2_A13, my OS version is the weekly HyperOS 1.0.24.3.25.DEV Beta
Yes, you have to update your TWRP since your OS is Android 14 and your TWRP for Android 13.
gogocar62
XM12 Tester
- 22 Apr 2021
- 5,074
- 322
gogito
Members
- 28 Mar 2024
- 73
- 20
I encountered this as well, do we know the reason for this behavior?
Thanks guys!
And if anyone has the same problems updating the TWRP from Android 13 to Android 14 on Xiaomi 13 Pro (nuwa), this helped me:
1. installed adb-setup-1.4.3 on my computer.
2. downloaded "Xiami Mi Unlock Tool v. 7.6.727.43" and installed "MiUsbDriver.exe".
I had to connect my nuwa to my pc via usb cable in fastboot for this. The correct drivers were then installed.
3. run Fastboot as described here in the forum using cmd.exe. However, I had to modify the command line a little to make it work for me. My command line was "fastboot.exe flash recovery_ab ./recoveryfilename.img"
I was then able to update to the latest weekly version via TWRP and everything works.
Many thanks again!
so i have a question: i have a xiaomi 13 (fuxi) this version did not work on my phone ( apps do not start everything just chrashd)
my twrp version :
twrp-3.7.0_12-v7.9_A13-fuxi-skkk.img
do i have to renew the version although i always install per fastboot ?
if so how is it possible to update twrp without install a new phone ?
my twrp version :
twrp-3.7.0_12-v7.9_A13-fuxi-skkk.img
do i have to renew the version although i always install per fastboot ?
if so how is it possible to update twrp without install a new phone ?
@Samydp91 Since HyperOS is based on A14 and your TWRP for A13, you have to update TWRP.
Go into TWRP > Install > Click on "Install image" > Choose TWRP.img file
If you don't want to use TWRP and want to flash ROMs with fastboot, TWRP isn't necassary at all.
sourceforge.net
Go into TWRP > Install > Click on "Install image" > Choose TWRP.img file
If you don't want to use TWRP and want to flash ROMs with fastboot, TWRP isn't necassary at all.
Recovery for Xiaomi devices - Browse /fuxi at SourceForge.net
List of relevant recovery in one place
sourceforge.net
Gigabyte88
Members
- 4 Mar 2024
- 11
- 15
Xiaomi 14. The last two updates have messed up the entire system, and a lot of errors have appeared. 1- You cannot send an APK through a standard file explorer. 2 - Photo search does not work in browsers. 3 - Very fast battery consumption, 14% in 6 hours of sleep (before 2-3%)
huliganboy
Members
- 30 Jan 2024
- 8
- 15
- Status
