HyperOS 1.0 23.11.27/30

[claw88]

what about the heating? in the first build, the device heated up while, for example, crdroid was cold as ice

No heating issue.

 

[areyouanand]

My device (Xiaomi 14) randomly restarts every few minutes, but not completely. I see the Xiaomi HyperOS bootscreen and then I'm back on my lock screen.
I've set it up fresh with a wipe several times now. I haven't been able to find anything related to this in the thread so far, am I the only one?

same on SHENNOG, this soft reboot happens while selecting boot.img in Magisk for patching or using Brave, and launching google wallet.
Unfortunetly i cannot provide log atm.

WRT Magisk, 26.1/3/4 eneded with black screen after flashing thru TWRP. had flash older EU build to make the device boot.

 

[hewlett2008]

Can your LSPosed work?

Zygisk working now but LSPosed App is frozen...

 

[Masbucho]

Wallet/gpay worked using

Those who has no working Gpay on this ROM version, install this apk manually
https://sourceforge.net/projects/xi...eu-app/XiaomiEUModule_2023.12.01.apk/download

Wallet/gpay worked.. thanks for your help

 

[Masbucho]

Camera has glitch when create short film..
Hope this helps for your information

 

[maksam07]

Camera has glitch when create short film..

mi 13 pro - all good

Spoiler: screenshot

 

[maksam07]

I got the miui report sending window for the gallery once. Who is this report going to go to? Or maybe I can upload it here for the developers to check what's wrong?

 

[mczinho2000]

Xiaomi 13 pro updated from 11.19 to 11.27 via twrp. For now works without problems.

bro, whats your twrp version? its "twrp-3.7.0_12-v8.1t5_A14-nuwa-skkk"?

 

[mav744]

For the Problem with Zygisk and an active Module what use Zygisk i take a logcat. I take one with LSPosed active as Module in Magisk what needs Zygisk, and one with no Module active what needs Zygisk. Maybe the logcats can Help.

Logcat without Module Active

Logcat with LSPosed active

 

[rrayton]

guys wich twrp are you using for fuxi?

 

[taz80000]

Good little feedback on mi13
Even after enabling the command lines the gallery apk still closes by itself!!
Same for the lock screen!!

 

[darki]

Good little feedback on mi13
Even after enabling the command lines the gallery apk still closes by itself!!
Same for the lock screen!!

Did you try this?

HyperOS 1.0 - 23.11.8/13/16

No, unlikely. I installed via fastboot update and I have the issue. I posted the Gallery logcat previously. Hopefully this will help the devs locate the issue. Have you disabled Mi Video?

xiaomi.eu

 

[darki]

guys wich twrp are you using for fuxi?

Latest skkk release.

Recovery for Xiaomi devices - Browse /fuxi at SourceForge.net

List of relevant recovery in one place

sourceforge.net

 

[ingbrzy]

My device (Xiaomi 14) randomly restarts every few minutes, but not completely. I see the Xiaomi HyperOS bootscreen and then I'm back on my lock screen.
I've set it up fresh with a wipe several times now. I haven't been able to find anything related to this in the thread so far, am I the only one?

make a logcat

 

[moskito99]

Camera has glitch when create short film..
Hope this helps for your information

Raise bugs in bugs section. However I have no such issue on 13 ultra with any of the HyperOS releases.

 

[PeaceOne]

Poco F5 pro. I had the 23.11.8... Only that ROM without problems. I tried the current beta 4x, 4 ways. Almost everything is fine. I was unable without root for the security check to reach 100%. Clearing all data doesn't help. I wish good luck to whoever has more expertise and more patience. I'm back to official miui 14. I am patiently waiting for the stable HyperOS.

 

[taz80000]

Did you try this?

HyperOS 1.0 - 23.11.8/13/16

No, unlikely. I installed via fastboot update and I have the issue. I posted the Gallery logcat previously. Hopefully this will help the devs locate the issue. Have you disabled Mi Video?

xiaomi.eu

This was already happening to me with the first version when it was installed via fastboot!!

 

[darki]

This was already happening to me with the first version when it was installed via fastboot!!

That doesn't answer the question. If you didn't try, give it a try now. For me it worked.

 

[jamesliu0802]

Hello, I am a Chinese user. I found that whether it is MIUI CN or MIUI EU, there are problems with battery optimization. MIUI CN will add certain Chinese apps to the battery optimization whitelist. When I set it to the optimized state, its status will always be automatically restored. MIUI Global will only be restored after restarting the phone.

 

[mczinho2000]

Sorry if this is a trivial question, but why do different file-sharing sites have different firmware sizes?
androidfilehost: xiaomi.eu_multi_NUWA_OS1.0.23.11.27.DEV_os1-14.zip (5.7GB)
sourceforge: xiaomi.eu_multi_NUWA_OS1.0.23.11.27.DEV_os1-14.zip (6.1 GB)

they are the same files. just read different from each site

 

[stathis95194]

adb shell
pm compile -a -f -r cmdline
pm compile -f -r cmdline --secondary-dex com.google.android.gms
exit

This fixed all my apps that were not opening except from 1.

remote.control.tv.universal.forall.roku

Even uninstall and re-install didn't help. Any idea why this is happening?

 

[ingbrzy]

This fixed all my apps that were not opening except from 1.

remote.control.tv.universal.forall.roku

Even uninstall and re-install didn't help. Any idea why this is happening?

pm compile -f -r cmdline --secondary-dex remote.control.tv.universal.forall.roku

 

[maksam07]

Did you try this?

HyperOS 1.0 - 23.11.8/13/16

No, unlikely. I installed via fastboot update and I have the issue. I posted the Gallery logcat previously. Hopefully this will help the devs locate the issue. Have you disabled Mi Video?

xiaomi.eu

Linux:

./adb shell pm clear com.miui.gallery

Exception occurred while executing 'clear':
java.lang.SecurityException: PID 21591 does not have permission android.permission.CLEAR_APP_USER_DATA to clear data of package com.miui.gallery
        at com.android.server.am.ActivityManagerService.clearApplicationUserData(Unknown Source:549)
        at com.android.server.pm.PackageManagerShellCommand.runClear(Unknown Source:117)
        at com.android.server.pm.PackageManagerShellCommand.onCommand(Unknown Source:1135)
        at com.android.modules.utils.BasicShellCommandHandler.exec(Unknown Source:27)
        at android.os.ShellCommand.exec(Unknown Source:4)
        at com.android.server.pm.PackageManagerService$IPackageManagerImpl.onShellCommand(Unknown Source:24)
        at android.os.Binder.shellCommand(Unknown Source:0)
        at android.os.Binder.onTransact(Unknown Source:149)
        at android.content.pm.IPackageManager$Stub.onTransact(Unknown Source:28)
        at com.android.server.pm.PackageManagerService$IPackageManagerImpl.onTransact(Unknown Source:0)
        at android.os.Binder.execTransactInternal(Unknown Source:109)
        at android.os.Binder.execTransact(Unknown Source:39)

 

[Bec de Xorbin]

Linux:

./adb shell pm clear com.miui.gallery

Exception occurred while executing 'clear':
java.lang.SecurityException: PID 21591 does not have permission android.permission.CLEAR_APP_USER_DATA to clear data of package com.miui.gallery
        at com.android.server.am.ActivityManagerService.clearApplicationUserData(Unknown Source:549)
        at com.android.server.pm.PackageManagerShellCommand.runClear(Unknown Source:117)
        at com.android.server.pm.PackageManagerShellCommand.onCommand(Unknown Source:1135)
        at com.android.modules.utils.BasicShellCommandHandler.exec(Unknown Source:27)
        at android.os.ShellCommand.exec(Unknown Source:4)
        at com.android.server.pm.PackageManagerService$IPackageManagerImpl.onShellCommand(Unknown Source:24)
        at android.os.Binder.shellCommand(Unknown Source:0)
        at android.os.Binder.onTransact(Unknown Source:149)
        at android.content.pm.IPackageManager$Stub.onTransact(Unknown Source:28)
        at com.android.server.pm.PackageManagerService$IPackageManagerImpl.onTransact(Unknown Source:0)
        at android.os.Binder.execTransactInternal(Unknown Source:109)
        at android.os.Binder.execTransact(Unknown Source:39)

Did you follow step 4 completely?

 

[darki]

@maksam07 Do you also have "USB Debugging (security settings)" enabled?