MIUI 14 23.1.3


Status
Not open for further replies.
Hi, if I come from miui13 v22.10.26 on mi11 Venus.

Could I directly install newest 23.1.3 mi miui14?

Is it correct to:

1) first install twrp (newest skkk version from opening post) via fastboot boot twrp.img then install recovery to ramdisk by choosing twrp.img on phone

2) install newest image 22.1.3 without any format (I don't want to loose data (should I turn off security pin first, so that memory isn't crypted?)

Or is there an easier faster way to do the update without data loss?

Thx in advance
 
I want to upgrade from version 22.10.26 without losing data. I tried all versions for fastboot, the system does not start, goes into bootloop. Now I install through TWRP and again the system does not start. I just can not understand what prevents the system from starting? Mi11Pro (mars).
 
I have a bootloop on my F3. I have no errors when flashing into TWRP. The phone boots up, after the bootanimation a black screen appears and the phone reboots. Twice three times and boot into recovery. Maybe one of these logs will help.

https://mega.nz/folder/ldxUUYhA#SdklmSZR1HuJNMXUaFugBA

Same problem on K50 Ultra update, without format:
V13.0.7.0 fastboot to V13.0.10.0: work smooth
V14.0.22.12.26 fastboot to V14.0.23.1.3: get bootloop
 
Last edited:
Why are you inventing new methods to do standard procedures?
The correct way to boot into TWRP after flashing it via fastboot is "fastboot reboot recovery"
Please could you update the first post with a link to proper steps for the different divides, at least those with a_b partition and what to do for those without. I have read through comments and every one is trying everything else. Mostly success is after they have failed first time after wrong step meant for different device. Thank you
 
Please could you update the first post with a link to proper steps for the different divides, at least those with a_b partition and what to do for those without. I have read through comments and every one is trying everything else. Mostly success is after they have failed first time after wrong step meant for different device. Thank you
No worries, I'm working on a guide like that.
 
Issue installing this version on mi 12s ultra.
Tried through the updater app and failed then through latest twrp as can be seen in these images.
 

Attachments

  • IMG-20230108-WA0000.jpg
    IMG-20230108-WA0000.jpg
    162.7 KB · Views: 412
  • IMG-20230108-WA0001.jpg
    IMG-20230108-WA0001.jpg
    167.5 KB · Views: 404
Last edited by a moderator:
Good morning, I made the update without any problem and everything was fine. With this latest update, the biggest problem is excessive battery consumption, while using the phone I realized it, but tonight with the phone on standby it was amazing (see image) it's a problem I didn't have with the first one.
Can something be done?
Similarly, during charging the phone gets very hot.
Thanks for the gig and updating our phone. By the way,
I have a Poco F3
 

Attachments

  • Screenshot_2023-01-08-09-56-43-232_com.miui.securitycenter.jpg
    Screenshot_2023-01-08-09-56-43-232_com.miui.securitycenter.jpg
    175 KB · Views: 459
Last edited by a moderator:
Issue installing this version on mi 12s ultra.
Tried through the updater app and failed then through latest twrp as can be seen in these images.
If you will see this error in TWRP during ROM install, just reboot to TWRP again and try again (repeat until the installation is successful, maybe even 10 times)
It is written in the second post of this thread.
 
Good morning, I made the update without any problem and everything was fine. With this latest update, the biggest problem is excessive battery consumption, while using the phone I realized it, but tonight with the phone on standby it was amazing (see image) it's a problem I didn't have with the first one.
Can something be done?
Similarly, during charging the phone gets very hot.
Thanks for the gig and updating our phone. By the way,
I have a Poco F3View attachment 45563!!
Mine is 14% which still seems higher than usual. Same device
 
If you will see this error in TWRP during ROM install, just reboot to TWRP again and try again (repeat until the installation is successful, maybe even 10 times)
It is written in the second post of this thread.
Thank you, I've seen that yesterday but then forgot all about it until it happened to me this morning, sorry for that
 
Hello, I read the forum, I tried everything you wrote, the TWRP installation gives me an error message. I also tried the command lines that were suggested, then the old TWRP for Android 12 came up, which does not see the phone's internal storage
 

Attachments

  • Windows PowerShell 2023. 01. 08. 10_03_13.png
    Windows PowerShell 2023. 01. 08. 10_03_13.png
    53.9 KB · Views: 142
Thanks for newest recovery version.
12x (Psyche) no problems so far.
NFC
Android Auto
Battery
Performance
Chromecast
Camera

Thanks a lot!
 
Hello, I read the forum, I tried everything you wrote, the TWRP installation gives me an error message. I also tried the command lines that were suggested, then the old TWRP for Android 12 came up, which does not see the phone's internal storage
Use "fastboot flash recovery_ab twp.img" and then "fastboot reboot recovery".

Look at the first and second post in this thread
 
Code:
fastboot flash recovery_ab twrp.img
12S Ultra (thor)
12 Pro (zeus)
12 (cupid)
12S Pro (unicorn)
12T Pro / Redmi K50 Ultra (diting)
POCO F4 GT / Redmi K50 Gaming (ingres)
12S (mayfly)

Code:
fastboot boot twrp.img
Mi 10S (thyme)
Mi 11 Pro (mars)
Mi 11 Ultra (star)
Mi 11 (venus)
POCO F3 / Redmi K40 (alioth)
Mi 11i / Redmi K40 Pro/+ (haydn)
MIX 4 (odin)
12X (psyche)
POCO F4 / Redmi K40S (munch)
 
Xiaomi 12X here: I still have twrp-3.6.2_12... do I need to update it to 3.7.0 or can I just install the new Xiaomi-EU using my old twrp?
 
Update was Successfully!

Device: Mi 11 Ultra
Where do I come from: MIUI 13 Latest Weekly
Where am I now: MIUI 14 Latest Dev Build

My performed steps:
-
Download trwp.img for my Device
- rename it to "trwp.img"
- Download MIUI 14 Latest Dev Build
- Copy trwp.img & MUI 14 Rom on the Device
- Boot Device into Fastboot
- Type "fastboot devices" in cmd to make sure, my device is recognized
- Type "fastboot boot twrp.img" to boot Recovery
- Install Recovery (We only have the img so we need to go to "Advanced" and select "Install Recovery Ramdisk"
- Install MIUI 14
- Wipe Dalvik
- Reboot
- Finish


I made a dirty Installation and it works perfect for me.
I had some errors showing in the Recovery.
The error told me that he cant mount mi-ext, but i didn't care because i knew "mi-ext" was not necessary.

And thats it, i will test everything now but for the moment, my Installation was successfully without "Wipe Data" so i dont lose any Data :)

regards
 
Hi, M11 Lite 5G Renoir was already on fastboot long before the other phone models. Not sure about the reason for that. But yesterday I tried to install twrp latest version for Renoir , but it worked just once. Besides several error messages some partions seems to be missing. Anybody managed to get TWRP working permantly on that phone ?
Tks
 
Update was Successfully!

Device: Mi 11 Ultra
Where do I come from: MIUI 13 Latest Weekly
Where am I now: MIUI 14 Latest Dev Build

My performed steps:
-
Download trwp.img for my Device
- rename it to "trwp.img"
- Download MIUI 14 Latest Dev Build
- Copy trwp.img & MUI 14 Rom on the Device
- Boot Device into Fastboot
- Type "fastboot devices" in cmd to make sure, my device is recognized
- Type "fastboot boot twrp.img" to boot Recovery
- Install Recovery (We only have the img so we need to go to "Advanced" and select "Install Recovery Ramdisk"
- Install MIUI 14
- Wipe Dalvik
- Reboot
- Finish


I made a dirty Installation and it works perfect for me.
I had some errors showing in the Recovery.
The error told me that he cant mount mi-ext, but i didn't care because i knew "mi-ext" was not necessary.

And thats it, i will test everything now but for the moment, my Installation was successfully without "Wipe Data" so i dont lose any Data :)

regards
Great guide for mi 11 ultra, I will try later with these steps.
 
Yes. Boot into the existing TWRP and goto "install recovery as ramdisk" and select twrp-3.7.0_12-v6.6_A13-alioth-skkk.img linked above for Alioth/K40/F3.
I did, now it's stuck everytime I try to boot into TWRP, should have pick the correct one for my 11 pro xD, going to flash the older one again until it's working.
 

Attachments

  • IMG_20230108_134811.jpg
    IMG_20230108_134811.jpg
    954.1 KB · Views: 362
Last edited by a moderator:
Update succeful mi 11
 

Attachments

  • Screenshot_2023-01-08-14-27-07-158_com.android.updater.jpg
    Screenshot_2023-01-08-14-27-07-158_com.android.updater.jpg
    132.2 KB · Views: 325
Last edited by a moderator:
  • Like
Reactions: Cebrero
Downgrading twrp Version has to be done via fastboot? If current TWRP isn't working anymore, correct ?
 
I really think that this thread needs a better explanation about how each device works, how TWRP is flashed first time, how it's updated depending on the device. I see a lot of different experiences here with a lot of good and bad results in the mix.
The official way to install it the first time for all of the devices is fastboot boot twrp.img and then flash the appropriate rom. TWRP will be permanently installed, and updated along with the rom.
The other methods are just alternative workarounds I've been trying to provide for people who won't just use fastboot like they're told. Props to Camerado for compiling the list above.
 
Last edited:
  • Like
Reactions: Imtuga
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
Replies
51
Views
45K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
54K