MIUI 13 22.8.17


Status
Not open for further replies.
Birraque said:
After each update in the TWRP step the automatic installation does not restart when finished. - Report
I'm running the TWRP SKKK from MIUI.eu's script and I noticed now that the option "disable auto reboot after updated" is selected by default. (annex)
What is the correct configuration to restart at the end? I would like to test it in the next update.

Regards,
Click to expand...
reset TWRP settings to default..
 
  • Like
Reactions: JakSpoon, Vampiro, Birraque and 1 other person
ingbrzy said:
reset TWRP settings to default..
Click to expand...
I did it just after you asked to do and confirm now that previous Settings Tab is the TWRP SKKK Default configuration. (annex)
What's the recommended options to select and/or deselect to run MIUI.eu install script?
 

Attachments

  • IMG_20220820_122056.jpg
    IMG_20220820_122056.jpg
    343.5 KB · Views: 267
  • Like
Reactions: h464r and sena940
Birraque said:
I did it just after you asked to do and confirm now that previous Settings Tab is the TWRP SKKK Default configuration. (annex)
What's the recommended options to select and/or deselect to run MIUI.eu install script?
Click to expand...

Try with these. It's what I use and don't have an issue. Different phone though, I have cas


9ed0bfe6fb9e736dfc210f3cd87a4654.jpg


Sent from my M2007J1SC using Tapatalk
 
Last edited by a moderator:
  • Like
Reactions: biscoot and Birraque
Birraque said:
I did it just after you asked to do and confirm now that previous Settings Tab is the TWRP SKKK Default configuration. (annex)
What's the recommended options to select and/or deselect to run MIUI.eu install script?
Click to expand...
look here…
xiaomi.eu

[HowTo] Install Recovery image

How to install a xiaomi.eu recovery image Because of more and more working TWRP or OrangeFox on MIUI13 Android12 a little How To and here we go .... Unlock your device (only once) - you need to unlock bootloader -> a small [howto] to unlock bootloader Install Tools and Drivers - install USB...
xiaomi.eu xiaomi.eu
 
  • Like
Reactions: Birraque
It used to be that there was only ONE twrp recovery and Orangefox came along to help out.
We were notified if a new version came out to make an upgrade but now there are too many versions of the same software in use and nobody can follow them all to know which is the right one to get the job done.
Hey Devs, how about getting together and unite under one flag !
 
Staschme said:
It used to be that there was only ONE twrp recovery and Orangefox came along to help out.
We were notified if a new version came out to make an upgrade but now there are too many versions of the same software in use and nobody can follow them all to know which is the right one to get the job done.
Hey Devs, how about getting together and unite under one flag !
Click to expand...
What does it have to do with the thread though?
 
  • Like
  • Haha
Reactions: biscoot, Einar, katerpanne and 1 other person
stathis95194 said:
Try with these. It's what I use and don't have an issue. Different phone though, I have cas


9ed0bfe6fb9e736dfc210f3cd87a4654.jpg


Sent from my M2007J1SC using Tapatalk
Click to expand...
Thanks for your input. Since I have a confirmed Issue Report for Poco F3 open for one month with none response I decided to open this thread to help everyone who like me wants automatic installation with reboot at the end.
My suggestion is to deselect the option "disable auto reboot after updated" since the MIUI.eu script should do the reboot when finished. If it doesn't work, also select the option "reboot after installation is complete".

EDITED: I CONFIRM that just deselecting the option "disable auto reboot after updated" fix this reboot issue when automatic installation.

Regards,
 

Attachments

  • IMG_20220821_102147.jpg
    IMG_20220821_102147.jpg
    295.1 KB · Views: 487
  • Screenshot_2022-08-21-12-21-36.png
    Screenshot_2022-08-21-12-21-36.png
    141 KB · Views: 469
Last edited:
  • Like
Reactions: h464r and katerpanne
katerpanne said:
look here…
xiaomi.eu

[HowTo] Install Recovery image

How to install a xiaomi.eu recovery image Because of more and more working TWRP or OrangeFox on MIUI13 Android12 a little How To and here we go .... Unlock your device (only once) - you need to unlock bootloader -> a small [howto] to unlock bootloader Install Tools and Drivers - install USB...
xiaomi.eu xiaomi.eu
Click to expand...
Thanks for your prompt response.
It's an excellent step-by-step guide and perhaps could to include a note on the above discussion #60 as well for those who want automatic installation with reboot.
 
  • Like
Reactions: h464r and katerpanne
The main reason to come over here was to have a better battery life at least 20% better then stock. But here it's not the case. I think after unlocking bootloader, I lost camera quality as the photos always comes white ish instead of dark blacks worst scenerio is outdoor shooting in the shade faces comes grainy
I wish I could revert and get OTA update. I'm using MI 11 Ultra Global
 
Jacktackle said:
The main reason to come over here was to have a better battery life at least 20% better then stock. But here it's not the case. I think after unlocking bootloader, I lost camera quality as the photos always comes white ish instead of dark blacks worst scenerio is outdoor shooting in the shade faces comes grainy
I wish I could revert and get OTA update. I'm using MI 11 Ultra Global
Click to expand...
If you wanna roll back to MIUI by Xiaomi just Mi Flash the stock MIUI for your device model and lock it when finish. But I don't think you'll get better camera quality after that.
 
  • Like
Reactions: h464r and katerpanne
Do u think it always successful? As one youtuber said it stucks at the boot and then he unlocked again. So I'm not sure if it works
 
Jacktackle said:
Do u think it always successful? As one youtuber said it stucks at the boot and then he unlocked again. So I'm not sure if it works
Click to expand...
yes… install the original rom with miflash and then you can lock the bootloader, its a button in mi flash. if you install a false rom and lock the bootloader you have a nice door stopper :)

here you can as example download your original rom
https://mifirm.net/model/equuleus.ttt

on the other side ask the youtuber :)
 
  • Like
Reactions: Birraque
Hello older topics aren't open to post so I'll ask here.
After last rom I never get notifications from Google calendar and messages.. I have to check the app to see if I have any notifications..
Of course it's no battery restricted and autostart both.. Phone is poco f2 Pro

Any suggestions?
Thanks in advance
 
Hi guys,

Sorry to bother. I understand that mi 10 ultra is now using recovery to download updates. I want to know if I need to wipe or format data in order to download the recovery twrp. I have searched for a thread for instructions aswell but I cant seem to find a step by step guide. Again sorry if this is there, I have not seen it. If you can help, thank you.
 
i recently got a mi 11 ultra and in the chinese rom i was able to switch from wide camera to ultra wide while recording videos, now i'm in the last beta update and today i realized i can't.
 
Status
Not open for further replies.

Similar threads

ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
337K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
45K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
54K
HyperOS
KGVER
KGVER
ingbrzy
  • Locked
HyperOS 1.0 24.6.3
Replies
46
Views
46K
HyperOS
din.ibrahim
D
Top Bottom
Back