MIUI 12.5 21.2.3/4


Do you like this MIUI version?

  • Total voters
    421
Status
Not open for further replies.
MixRC said:
Yes, like i said, it's working...BUT...
Did you try to erase any app in system?
Click to expand...
If your device was shipped with Android 10 (and above), you should avoid to modify the /system partition. You can brick your device. ;)
=> But you need to know that Magisk can modify the /system partition "systemlessly" => You need to use/create a Magisk module for that.

If your device was shipped with Android 9 (and below), you can modify the /system partition without issue. :)
 
  • Like
Reactions: MixRC
MixRC said:
To install the apk you don't need to go to TWRP, just install directly from the file manager, then you can upgrade the build version from Magisk Manager.
The "zip" version, you can install from TWRP, it contains the apk itself.
Tried both versions, none are working with these roms (A11)
Click to expand...
Hmm..
That's ~how I install magisk after each update. We might be talking about the same thing, but have you seen this?
www.xda-developers.com

The Magisk Manager APK can now be flashed from within TWRP

Magisk is now distributed as part of the Manager APK, meaning you no longer need to flash a separate ZIP file from a custom recovery.
www.xda-developers.com www.xda-developers.com

Also @Poney70, thanks for the info, haha. I ~only use magisk (and edxposed) canary on my mi 10. The ~"full" beta tester pack.
 
  • Like
Reactions: MixRC
Poney70 said:
If your device was shipped with Android 10 (and above), you should avoid to modify the /system partition. You can brick your device. ;)
=> But you need to know that Magisk can modify the /system partition "systemlessly" => You need to use/create a Magisk module for that.

If your device was shipped with Android 9 (and below), you can modify the /system partition without issue. :)
Click to expand...

My device is the Poco F2 Pro, 256 Gb, 8 Gb ram....it was shipped with Android 10 and it was upgraded sometime ago with A11...a rom with lots of bugs, that's why i decided to go for a xiaomi.eu roms, because a had a Mix 2S, with xiaomi.eu roms, from the day i unlocked the bootloader....

About systemless hosts, they're active on Magisk...but i think you're talking about other "systemless" :)
 
Blastboom Strice said:
Hmm..
That's ~how I install magisk after each update. We might be talking about the same thing, but have you seen this?
www.xda-developers.com

The Magisk Manager APK can now be flashed from within TWRP

Magisk is now distributed as part of the Manager APK, meaning you no longer need to flash a separate ZIP file from a custom recovery.
www.xda-developers.com www.xda-developers.com

Also @Poney70, thanks for the info, haha. I ~only use magisk (and edxposed) canary on my mi 10. The ~"full" beta tester pack.
Click to expand...


Good news, i haven't see that, mate. Like you, i have Magisk Canary too, nothing against it...
 
  • Like
Reactions: Blastboom Strice
Poney70 said:
That's wrong, Stable Magisk v21.4 is working without any issue on Android 11. And I don't recommend the Canary version at all. ;)
Click to expand...
I am currently using Canary, and have absolutely no problems. I follow updates whenever they are notified.
To change into Stable, it looks as though all I need to do is change the channel in settings to 'Stable', and then 'Install' the new Manager (and then probably Magisk itself). Is this correct?
 
Iain_B said:
I am currently using Canary, and have absolutely no problems. I follow updates whenever they are notified.
To change into Stable, it looks as though all I need to do is change the channel in settings to 'Stable', and then 'Install' the new Manager (and then probably Magisk itself). Is this correct?
Click to expand...
I don't know if you can do that without issue... Keep Canary version if you don't have issue. ;)
 
  • Like
Reactions: Iain_B
Iain_B said:
I am currently using Canary, and have absolutely no problems. I follow updates whenever they are notified.
To change into Stable, it looks as though all I need to do is change the channel in settings to 'Stable', and then 'Install' the new Manager (and then probably Magisk itself). Is this correct?
Click to expand...
Yes, correct.
Done that a few times without issues
 
  • Like
Reactions: Poney70, Iain_B and Allessa
Arley said:
Problems with spotify in the notifications controls and lock screen. It does not let pause or pass the song.
Mi 9 device
Click to expand...

You're lucky to have only that problem. Spotify notifications and lock screen controls works well on my Mi 9.

On the other hand, I have this issue, more serious and that hasn't happened to anyone else here.
 
piskr said:
The battery drain is massive. I don't remember how it was with the stable rom because I used it only for basic functions due to the limitations but I can say that it is almost double as it was with my previous phones (Huawei, Vivo) considering the battery capacity and reduced refresh rate (60) Hz. I wonder how much significant higher resolution impacts battery drain. I must say that I can't recognize any difference between Mi 11 and previous hd resolutions.
Click to expand...
I moved from Stable to Weekly 21.2.3 on my Mi 10 Pro. The first day the battery was worse but the second day the battery performs same like the stable Version. Usually I still have 50% at night. Good Job Developers!!!
 
I have poco f2 pro it come with poco launcher but after instal v21. 2.4 i have mi launcher its ok but when i install poco launcher the Gestures do not work while they are on official launcher .. Why?
 
Ahmed Sabri said:
I have poco f2 pro it come with poco launcher but after instal v21. 2.4 i have mi launcher its ok but when i install poco launcher the Gestures do not work while they are on official launcher .. Why?
Click to expand...
I don't know but I guess Xiaomi.eu devs chose to replace Poco Launcher by Mi Launcher for this reason (not working full gestures with this ROM version). :)
 
  • Like
Reactions: Ahmed Sabri
Ahmed Sabri said:
I have poco f2 pro it come with poco launcher but after instal v21. 2.4 i have mi launcher its ok but when i install poco launcher the Gestures do not work while they are on official launcher .. Why?
Click to expand...

I dont know but the new version seems to be buggy for the poco f2 :/ I noticed some other bugs myself ( which i posted in the bugs section like the rules demand)
 
  • Like
Reactions: Ahmed Sabri
Here on Redmi Note 8 I don't know if this is normal when I opened any application for the first time it has a slight slowness, when it stays open in the background and I click again it already opens quickly, more if I clean the windows and open any application he has a little slow time.
Same thing the notification bar if you go down with the phone locked and click on the fingerprint to unlock the device, the notification bar will slowly disappear.

Well I don't know if this is happening to me only but I am reporting here.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 
Daniel Nascimento said:
Here on Redmi Note 8 I don't know if this is normal when I opened any application for the first time it has a slight slowness, when it stays open in the background and I click again it already opens quickly, [...]
Well I don't know if this is happening to me only but I am reporting here.
Click to expand...
This was much worse in the first release of miui 12.5 and all RN8 gingko users are hoping for the best in upcoming builds.
 
  • Like
Reactions: Daniel Nascimento
Poney70 said:
I don't know if you can do that without issue... Keep Canary version if you don't have issue. ;)
Click to expand...
geoorg said:
Yes, correct.
Done that a few times without issues
Click to expand...
Magisk modification from Canary to Stable carried out simply and successfully (I hope!).
I did my normal backup, just in case ;) - does not seem to have been needed though.
All still seems to be working fine now. Thanks
 
  • Like
Reactions: Poney70 and geoorg
Achimlk9 said:
I moved from Stable to Weekly 21.2.3 on my Mi 10 Pro. The first day the battery was worse but the second day the battery performs same like the stable Version. Usually I still have 50% at night. Good Job Developers!!!
Click to expand...
This confirms that a bit of time is needed for a 'settling in' period. And maybe the AI has now kicked in as well.
 
  • Like
Reactions: ddj123
Daniel Nascimento said:
Here on Redmi Note 8 I don't know if this is normal when I opened any application for the first time it has a slight slowness, when it stays open in the background and I click again it already opens quickly, more if I clean the windows and open any application he has a little slow time.
Same thing the notification bar if you go down with the phone locked and click on the fingerprint to unlock the device, the notification bar will slowly disappear.

Well I don't know if this is happening to me only but I am reporting here.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
Click to expand...
Well yes it is normal. We have to be reasonable RN8 is a lower mid range device - you should not expect miracles at that price range.
Regarding the first click and the the speed up afterwards - the app is loaded in RAM and then it starts more quickly on the second click. Keep in mind you are using a Super wallpaper that is officially only available for higher end devices, also you have other goodies like blurring and so on which are also adding load.
As @mankokoma said the performance has improved a lot in MIUI 12.5 and A11 and in my opinion this is the best MIUI firmware I had on this device for the 13 months that I have owned it. There are some small kinks in it but there will always be there it is beta, although from what I have seen with Xiaomi official even stable is beta :D
 
  • Like
Reactions: jutruka, Daniel Nascimento, ddj123 and 2 others
Status
Not open for further replies.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
168
Views
61K
HyperOS
xMarvin732
X
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
268K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
41K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
38K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
42K
HyperOS
KGVER
KGVER
Top Bottom
Back