MIUI 12.5 21.1.6/7


Do you like this MIUI version?


  • Total voters
    255
Status
Not open for further replies.
I can't use my fingerprint while screen is off. Mi 9 Lite

Confirmed, the same issue on Mi 9 SE with Android 11.

One more bug: the system plays the notification sound when I exit silent mode, no matter if the Unmute sound switch is turned on or off.
 
  • Like
Reactions: psydex
do not scare the owners of a mi 9 se (grus), if there is TWRP functional and it does not generate problems of stuck fastboot, nor problems of encryption, nor bootloop.

come to read here.

greetings to all!!
Can anyone with Mi9SE confirm this works?
I already gave up and returned back to stock until all these issues are ironed out
 
  • Like
Reactions: cutandaweb
The 2 original TWRP's don't work on my Mi 9 SE. So I installed unofficial TWRP (XDA) and the Mi9 SE downloaded the update 15.2 OTA and TWRP installed the rom. All good. I don't understand why the original TWRP's don't work.
But there's a note for installing the update, follow these steps first, maybe it works for you.
Thanks for your reply! I managed to flash the rom by booting into Redispade's TWRP on XDA. But when I finished flashing the rom, the phone went into fastboot mode. The only way to get it to boot to the system was by flashing the original TWRP 3.5.0 9-0, the same one that was giving me that error. I don't know why this is happening
 
Thanks for your work.

I am experiencing intermittent wifi problem on both the first and third version of 21.1.6. (The second version is bootlooping) on my K20 Pro.

The wifi connects but while connected, sometimes it cannot access the internet and sometimes can. Mobile data works flawlessly.

I am unable to replicate this problem on both my iPad and my laptop so I think it's a problem with this version of the ROM.

Anyone else having a similar issue?
 
Thanks for your reply! I managed to flash the rom by booting into Redispade's TWRP on XDA. But when I finished flashing the rom, the phone went into fastboot mode. The only way to get it to boot to the system was by flashing the original TWRP 3.5.0 9-0, the same one that was giving me that error. I don't know why this is happening

I use TWRP-3.3.2B-0301-XIAOMI9SE-CN-wzsx150 recovery on my Mi 9 SE (since android 10 update), with this I wasn't facing any problems with the update. I installed 20.12.28 last week, 21.1.6 today, everything went like a charm.
Currently I can't find this recovery to download, if someone needs is, I will upload to somewhere.
 
Good update & clean install from A10 to A11/12.5 on Mi 9 Lite. Did a full twrp backup beforehand, but not needed.

Just a couple of bumpy reboots after flashing Magisk 21.2. Otherwise, smooth restoration of apps.

Time for a Gin & tonic, and a donation on its way right now.
Thanks a lot.
 
I use TWRP-3.3.2B-0301-XIAOMI9SE-CN-wzsx150 recovery on my Mi 9 SE (since android 10 update), with this I wasn't facing any problems with the update. I installed 20.12.28 last week, 21.1.6 today, everything went like a charm.
Currently I can't find this recovery to download, if someone needs is, I will upload to somewhere.
You may also want to let those people know: https://xiaomi.eu/community/threads/twrp-recovery-list-of-relevant-recovery-in-one-place.57730/
 
I noticed some things in a mi9t pro:

* The animations in the home screen are a bit laggy.
* The fingerprint in some cases is very slow.

Maybe in future updates since some of this problems but for now I stay in this build.

Enviado desde mi Mi 9T Pro mediante Tapatalk
 
I noticed some things in a mi9t pro:

* The animations in the home screen are a bit laggy.
* The fingerprint in some cases is very slow.

Maybe in future updates since some of this problems but for now I stay in this build.

Enviado desde mi Mi 9T Pro mediante Tapatalk
 
Edit flash scripts, remove all lines that mention crc...
finally this is flash my Global rom Mi 12.04, now I flashing the latest TWRP and go back to Xiaomi.eu
man,you save me, I have all day searching for solution
 
I just keep getting loopin , format data , reboot to recovery put rom in phone flash and after flashing is done ,phone goes back to recovery, Poco F2 pro
I am on V12.0.8.0.QJKCNXM.. I was also try stock _V12.0.1.0.QJKMIXM its the same, always goes back to twrp
Try formatting data after installing the rom
 
thank you for your answer Igor. in the last beta I was able to switch between 4G and LTE. since the update, only LTE is available in the status bar. regardless of whether the switch is active or not. my operator is the same. I have an Umi and my last beta was 20.12.29

Gesendet von meinem MI 3W mit Tapatalk
What you had in the past is irrelevant. Weekly ROMs based on Android 11 have received a new System UI component, and now network type names are defined per operator (MCC/MNC) by Xiaomi.
 
  • Like
Reactions: Maximhtc
I am on Stock Rom Global or MI 12.04 , I just flash TWRP 3.4.1.b-0328 , can I now safe flash this last version of Xioami.eu rom?
in twrp format data, reboot to recovery , put rom into phone and flash
 
First of all thanks for your great work guys.
I Want some Help please.
I have mi 9 lite with 20.12.9 version.
Twrp 3.5. 0
I Want install New ROM..
Can i make a dirty flash like always?
Only install New ROM in twrp?
No problem because upgrade Android 10 to Android 11??
Thanks friends
 
Lavender. Dirty flash. New version running for 1 and a half day. All fine until now. Only thing I'm missing is the VoLTE symbol in statusbar. But this problem already exist long time
 
First of all thanks for your great work guys.
I Want some Help please.
I have mi 9 lite with 20.12.9 version.
Twrp 3.5. 0
I Want install New ROM..
Can i make a dirty flash like always?
Only install New ROM in twrp?
No problem because upgrade Android 10 to Android 11??
Thanks friends
Dirty flash
Clear cache & dalvik
Delete "data/system/package_cache" using twrp file manager

Reboot
Patient for 1st boot ~5-7mins

Cheers! :cool:
 
I flash TWRP 3.4.2b 1206 , when I enter TWRP DATA is checked , but when I want to format data to flash xiaomi.eu data cant mount.. what twrp to use for Global mi 12.04 stock rom that I just flashed
 
RN8 ok, no problem so far, you will see battery working
I'm on RN8 too, tried to dirty flash by rebooting into TWRP and choosing the zip but apparently it isn't asking me for password so I can't access internal storage and install the zip. What am I doing wrong? Thank you.
 
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
Replies
51
Views
45K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
54K
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
35K