MIUI 12.5 21.1.6/7


Do you like this MIUI version?


  • Total voters
    255
Status
Not open for further replies.
Poco F2 Pro: I have CTS profile match: fail and Google pay is not working.

Also in Google play it is written: the device is not certified.

I have no root, only TWRP

Flashed from stable 12.0.5. Everything worked fine on stable.

Probably that because I did a dirty flash from stable on Android 10 to weakly on Android 11. If I wipe dalvik and cache - will it help?
 
Updated Mi 10 ultra but would keep booting back into recovery. Flashed 20.12.29 and phone booted back up. Would be a bit cautious flashing on the Ultra. Using recovery that first came out for the Ultra (0642 I think) did not try the new one.
 
Do someone knows solutions for stuck on MIUI logo.
I try factory reset reinstall etc.
Mi 10.
If you're at b00tl0g0 you're past kernel load and system check. I would assume there's something wrong on data partition. Format data might help but wipes your data obviously.
 
Probably that because I did a dirty flash from stable on Android 10 to weakly on Android 11. If I wipe dalvik and cache - will it help?
Clean install , u need to format data , that should fix ur issue i think.

Good luck

Sent from my Mi9 Pro 5G using Tapatalk
 
that is exactly what I do, I learn this to do with my eyes close.

flash twrp - format data - type yes , reboot to recovery , put rom in phone , flash , and after flash it goes back to twrp.

what partition do I need to use EXT4 or F2FS?
I said as you are now , go to twrp and only try to format data and then reboot system , nothing to flash..
 
  • Like
Reactions: jin_60
little bug
 

Attachments

  • Screenshot_2021-01-09-09-36-38-520_com.android.thememanager.jpg
    Screenshot_2021-01-09-09-36-38-520_com.android.thememanager.jpg
    724.3 KB · Views: 272
Hey, I still wonder why I don't get the notification when I'm playing multimedia on Spotify, Poweramp or Youtube Vanced, you know, that notification when I can skip songs or stop the app. Does anyone know how can I solve it? I can get the notification on Poweramp using the legacy notification option but I can't do anything on the other two apps. I've even tried permanent notifications but nothing changes
 
1. By some reason none of flashed TWRP's request the unlock pattern now (earlier it was requested and file structure was ok to copy the ROM) for this reason on the sdcard there are files and folders with random letters and can not copy the ROM in it. What is that and what can be do to be able to copy the ROM?

View attachment 33899

2. How can I install the ROM with USB-OTG device, I have not found a description to do that
3. I would like to avoid clean install, because after several try i could install the previous ROM with format data only and spent two days with restoring.
Try to remove any pattern (no security or something), boot into twrp theway you do, putthe rom on a flash drive, connect it with otg the phone, select the otg storage in install tab and flash the rom.
 
Hello.
Mi 9. Dirty flash.

Battery drain problem (since 12.5). Hard to go to deepsleep.
System (other) - 70% battery usage when blocked. I think any of notyfication in status bar block deepsleep.
Description LTE is always (no 4G) despite of setting.
I donnt know if NFC (Gogle pay) work, with 20.12.28 -was not working.
 
Clean install , u need to format data , that should fix ur issue i think.

Good luck

Sent from my Mi9 Pro 5G using Tapatalk

Thanks for advice. No other way to fix it without formatting data?

Can someone prove that data format will help? Because don't want to loose all data and finally not fix a problem..

What steps with data format?
Format data... Then flesh this ROM?
 
Try to remove any pattern (no security or something), boot into twrp theway you do, putthe rom on a flash drive, connect it with otg the phone, select the otg storage in install tab and flash the rom.
Thank you I will try it. Regarding the security I think there is none since it is (a pattern) not requested when booting in recovery (that is the problem in my opinion with file structure decoding).
 
Hi All
I am currently on 20.12.29 Rom with Mi 10 pro (CMI) and current Twrp in memory is TWRP 3.4.2b 1206.

Should i update to 21.1.7 as below:
1) Go to updater
2) Select three dots...
3) Select choose package
4) Select RoM 21.1.7 and proceed for installation
By following these steps there would there not by any issue as i have twrp 1206 which us workable for mi 10 pro.

Further TWRP 3.4.0 (litter turtle) should be in memory for devices Mi 10 (UMI) and boot from fastboot command.

For Mi 10 Pro (CMI) it is fine to have Twrp
TWRP 3.4.2b 1206 in memory and can install ROM as explained above.

Can anyone please confirm this before i update rom to 21.1.7

Thanks
 
the same, mi 9t with the updated rom, boot to twrp.. switched back to the version uploaded yesterday night
A non-working new build has 21.1.6 xiaomi.eu MD5: 06234156EA4DCFC69403F1FFBE51E552
And it should be MD5: 8eaf85305ac9414ead8b3a208d9d4116
Put the previous version, before the bulkhead. It will load.
 
MiNote8 also with some camera problemes (camera slow)...the camera stops...not working.

Regards.
 
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
Replies
51
Views
45K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
54K
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
35K