MIUI 12.5 21.1.27/28

[Iain_B]

Maybe OT? Mi 10 (umi)
I have just had another Magisk Canary update (to 21407). I can confirm that after re-installing this week's ROM file, followed by the renamed .apk to .zip file, it still works as it should.

 

[Putti]

Very strange, on my MI9TPro a have L1, but still Netflix and prime video don't play in HD.
I deleted both apps and reinstalled them, with no success

 

[Poney70]

On my Mi 9T Pro (raphael) when I install Magisk, the phone don't boot

"MIUI" screen, but never start
Any can help me?

Did you wait at least 15 minutes?
And what version of Magisk did you install?

 

[Poney70]

Very strange, on my MI9TPro a have L1, but still Netflix and prime video don't play in HD.
I deleted both apps and reinstalled them, with no success

Netflix should work (are you using Magisk? You may need to hide Netflix in Magisk Hide menu, in Magisk Manager) but for Amazon Prme, you can check this thread => https://xiaomi.eu/community/threads/mi-9t-pro-to-redmi-k20-pro-conversion-patch-miui-11-12.56158/

 

[memesfromdlc]

I'm unable to setup screen lock because the system asks me to set up a fingerprint.

And I can't set up the fingerprint, since it's simply not recognizing my finger. The fingertip icon lights up, but the print won't add. I don't use screen protectors, etc.

Are there any workarounds for this thing? I'm not sure if I want to jump to another ROM again

Mi 9 Lite, Full Wipe

 

[Putti]

On my Mi 9T Pro (raphael) when I install Magisk, the phone don't boot

"MIUI" screen, but never start
Any can help me?

Same thing happened to me. It was one module or the fact that I flashed them all at once. I uninstalled magisk and rebooted, reflashed magisk and it worked. In my case it could have been an audio modification module

 

[Poney70]

I'm unable to setup screen lock because the system asks me to set up a fingerprint.

And I can't set up the fingerprint, since it's simply not recognizing my finger. The fingertip icon lights up, but the print won't add. I don't use screen protectors, etc.

Are there any workarounds for this thing? I'm not sure if I want to jump to another ROM again

Mi 9 Lite, Full Wipe

Can you check if you have Widevine L1 support, with "DRM Info" app?

About fingerprint issue, I saw a few reports for your device but no solution given...

 

[Iain_B]

Mi 10 (umi)
I've just noticed that under Settings / Battery / Battery, it says, "Fully charge and discharge your device 3-5 times to improve the accuracy of the battery health stats".
Perhaps this will reduce the number of people rushing in to complain about their battery each week.

 

[memesfromdlc]

Can you check if you have Widevine L1 support, with "DRM Info" app?

Not sure if I'm looking in the right direction, but I guess I do have this support? Here's the screenshot:

Spoiler: Pic

 

[Poney70]

Not sure if I'm looking in the right direction, but I guess I do have this support?

Yes, it's fine.

 

[Frenz75]

Beautiful rom! Only two very very very big problems:
i cant activate the app postepay (for credit cart mastercar Postepay Evolution) of Poste Italiane. It give me error transaction...
And i can to use Hide Magisk Manager, it can't to install the app with other name...

Same problem with postepay (transacion error BB1), enabled Install via USB from developer options, hided MagiskManager and reinstalled with another name, but postepay still not working

 

[Kacper Skrzypek]

Very strange, on my MI9TPro a have L1, but still Netflix and prime video don't play in HD.
I deleted both apps and reinstalled them, with no success

Can you send "Display specifications" screenshot? (Netflix settings)

 

[Poney70]

Same problem with postepay (transacion error BB1), enabled Install via USB from developer options, hided MagiskManager and reinstalled with another name, but postepay still not working

Hide Magisk Manager is a good idea but the most important thing to do is to go in the MagiskHide list (on the shield page in Magisk Manager), find your problematic app then expand to see all available activities of the app and enable for all.

Now, you should clean all data of your app in phone's settings.

If it's not working, try to rename the TWRP folder in the root of your phone's storage.

 

[Frenz75]

Hide Magisk Manager is a good idea but the most important thing to do is to go in the MagiskHide list (on the shield page in Magisk Manager), find your problematic app then expand to see all available activities of the app and enable for all.

Now, you should clean all data of your app in phone's settings.

If it's not working, try to rename the TWRP folder in the root of your phone's storage.

Solved unistalling magisk, then after reboot i opened Postepay app and configured it for first time. When i see that work fine i rooted again the phone. Now i can use app without errors.

Inviato dal mio Mi 10 utilizzando Tapatalk

 

[MeiGuddet]

Mi 10 (umi)
I've just noticed that under Settings / Battery / Battery, it says, "Fully charge and discharge your device 3-5 times to improve the accuracy of the battery health stats".
Perhaps this will reduce the number of people rushing in to complain about their battery each week.

Do you really think the bulk of people here start reading before they post? Hope dies last. But I think you will be disappointed. Anyway, keep your positive attitude and stay a dreamer. ;-)

 

[slobodanboshkov]

Mi 10 (umi)
I've just noticed that under Settings / Battery / Battery, it says, "Fully charge and discharge your device 3-5 times to improve the accuracy of the battery health stats".
Perhaps this will reduce the number of people rushing in to complain about their battery each week.

Yes it's a new feature. It's great one

Sent from my Redmi K30 Pro using Tapatalk

 

[Nightfox90]

Oi, did you get from stable to beta without formating? That was a serious mistake. Also if you had read the guide, you'd probably know you shouldn't flash the new twrp. Go back to the thread I shared (to see the steps and find the links for downloading), flash the old (little turtle twrp), reboot the phone into twrp (so as the old on gets written) and then shut down the phone, boot into recovery and boot without flashing the new (1206) twrp.
I think you did 2 mistakes that might actually could cause serious damage..


Haha, see now? From ~5quetiones I think I managed to spot the issue.
Edit: I saw your response to geoorg, yeah... I get it now.

Thank you for your answer. Restored little turtle recovery, then booted from 1206 twrp for the sake of restoring the recovery. I thought going from stable to beta would do no harm dirty flashing since the android core base version was the same.
My mistake. Sorry for the off topic! i hope your answer will help guys like me having troubles with mi 10.

 

[moviefirst]

Hello, I have a Poco F2 pro and want to know if you're coming from a custom rom like LineageOS and want to install this eu rom, what exactly is the sequence to flash and which twrp should i use? And do I have to return to stock first?

 

[deepblue2000]

Mi11 Camera Videomode is fixed to 30fps. Can't change it.

Edit: worked if I change to 8k resolution and then back. Then I could use 60fps @1080p

But everytime I do exit the Camera App, my Microsoft Launcher does a "light reset"

 

[WNSTNSNRS]

Yes, in the previous version have little bit of lag. On this one All is good. I download it from sourceforge

Thanks for the info bro. Can you re-upload it? Can't download it until now.

 

[biscoot]

Hello, I have a Poco F2 pro and want to know if you're coming from a custom rom like LineageOS and want to install this eu rom, what exactly is the sequence to flash and which twrp should i use? And do I have to return to stock first?

coming from different rom just flash eu rom & format data in twrp

 

[aiyoyo_aiyer]

I just want to say you can add gif as comment

Sent from my iPad using Tapatalk

 

[nikakvo]

Thanks for the info bro. Can you re-upload it? Can't download it until now.

All mirror on sourceforge work fine. Try to download it if you can`t download it i gonna upload it on MEGA but i`m shure this is not necessary

 

[peter9811]

Did you wait at least 15 minutes?
And what version of Magisk did you install?

21.4. Latest version

On 21.1.21, was working fine

 

[peter9811]

Same thing happened to me. It was one module or the fact that I flashed them all at once. I uninstalled magisk and rebooted, reflashed magisk and it worked. In my case it could have been an audio modification module

I uninstalled too. But I only have a module to apply emojis of iOS... I going to try disabling it