MIUI 12.0 20.5.14


Do you like this MIUI version?


  • Total voters
    389
Status
Not open for further replies.
hello! rom works great. I found one bug, while in phone call the proximity sensor doens turn off screen...so there is possibility of touching buttons with face...
And the other bug some users report....the vibrator doesnt stop after answering a data call...you have to lock and unlock.
MIUI 12 in Mi8 pro
thank you for this job guys
 
  • Like
Reactions: Androidgye
Anyone facing system slowing down after using the rom for some days? After flashing, the system works good for 1/2 days. Then it becomes laggy day by day.
Mi 8
 
  • Like
Reactions: grantius
hello! rom works great. I found one bug, while in phone call the proximity sensor doens turn off screen...so there is possibility of touching buttons with face...
And the other bug some users report....the vibrator doesnt stop after answering a data call...you have to lock and unlock.
MIUI 12 in Mi8 pro
thank you for this job guys
if its like in mi10 u need to activede it in settings
 
Hello,
i try to install TWRP on my MI9T, flashing with adb looks ok but i can not boot into recovery it ends in Fastboot Mode.
Maybe i make some mistake
 
Hello,
i try to install TWRP on my MI9T, flashing with adb looks ok but i can not boot into recovery it ends in Fastboot Mode.
Maybe i make some mistake
Use fastboot recovery command to flash TWRP then hold "Vol+" and "Power" buttons to boot in TWRP. ;)
 
Do you use Magisk? If you don't see Netflix in Play Store = phone fails SafetyNet check. ;)
Sure I use magisk. Just checked magisk status
 

Attachments

  • IMG_20200518_223542.jpg
    IMG_20200518_223542.jpg
    256.3 KB · Views: 226
Don't know which one can fail SafetyNet (maybe "liboemcrypto disabler" but I think you will need to re-install the ROM if it is this module...). ;)
 
Don't know which one can fail SafetyNet (maybe "liboemcrypto disabler" but I think you will need to re-install the ROM if it is this module...). ;)
Maybe I will try tomorrow, but it's for sure not liboem... because I had to flash it, because of safetynet fault. I guess it could be those Atmos module.
 
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
41K
Replies
51
Views
36K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
38K
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
32K