MIUI 12.3 20.12.9/10


Do you like this MIUI version?


  • Total voters
    336
Status
Not open for further replies.
Does anyone has this issue? When set the home screen wallpaper no matter what wallpaper I used... It will zoom-in a little bit... It isn't a serious issue but it is annoying.

EDITED: using Mi 10 Ultra
 
Redmi K30 5G, 2 possible bugs:
1. Unable to activate touch ID in bank application.
2. If from WhatsApp I activate a location to Maps, then the gestures do not work and I cannot exit Maps.
My k30 5g is working with touch id in bank

Gửi từ Redmi K30 5G của tôi bằng cách sử dụng Tapatalk
 
  • Like
Reactions: delboy and Hincly
I set wifi automatically.... When i go from home , it goes off but when i come back i come not automatically.... Its off
When you return home, perhaps there is another network (maybe stronger) which tries to connect, but fails, leaving no connection.
In the UK, my ISP has an app which allows me to specify which connection should be the dominant one for home. Perhaps you have the same?
 
Change twrp first , you can't update with 0317 ..
Android 11 doesn't accept pin numpers to decrypt your files in twrp ( it's written almost at every page )..
Before you do a new flash update you have to disable fingerprints and pin , but you can use a pattern which is decrypt storage at twrp ..
Now you have to format data and reflash the rom to be sure ..
Enter twrp , Advanced / Format data / type yes and hit enter ..
Go back to main twrp menu and choose , Reboot / Recovery ( phone will be enter to twrp again ) ...
Connect to pc and copy rom zip at memory..
Choose , Wipe / and swipe cursor right to factory reset ..
Go back to twrp main menu and choose , Install / choose the rom zip ..
Swipe to confirm flash...
When installation finish choose left button to Wipe cache and dalvik ..
Reboot system ..
Done ..

EDIT
Probably you have to try all this with the newest twrp for your device 1206 ..
I did what you indicated with the TWRP 0623 but the mobile remained bricked. Any more suggestions?
 
Does anyone know how to fix the unknown caller issue with VoLTE calling on this version ? I'm using POCO F2 Pro on both ends the calls are made ok but I'm allways getting the unknown caller on the receiving phone (doensn't matter which way the call is made).
 
On Mi9T I have an issue since 12.2 release: double tap on any notification on lock screen doesn't open the application after unlocking the screen, but brings me to launcher instead. I've tried wiping launcher data, switching different lockscreens in Themes app, no luck. Is it a known issue?
Same on Poco F2 Pro/K30 Pro
 
33360


Cant using the Gallery on Facebook or Messêngr
 
Actualy, i have this TWRP: TWRP-3.4.2B-0623-REDMI_K30_5G-CN-wzsx150, and ROM 20.11.12, if i want update, Do i have change TWRP? or Do i have disable pin and finger before tu update?
NOTE: I mean the PIN and finger of the normal unlocking of the mobile
With TWRP 317 I couldn´t install ROM 20.11.12 (error 7)
You stay with the 3.4.2b twrp recovery.

- delete "recovery.img" from the rom.zip (/firmware-update/recovery.img)
- copy rom.zip to internal storage
- disable/remove fingerprint/pin etc.
- boot to recovery
- mount all possible partitions
- install rom
(- mount all possible partitions & install magisk 21.1)
- wipe dalvik/cache
- reboot to system (2-3min boot time on MIUI logo)
- set pin/fingerprint/faceunlock or whatever again


This works great for me since a few updates!
 
Last edited:
  • Like
Reactions: Hincly
Guys can somone help me?

I have a MI NOTE 10 PRO /cc9 pro

I have installed the latest room. It works fine. But when I install MAGISK 21.1 I get bootloop to FASTBOOT.

I have the Mauronofrio TWRP

To unlock the bootloop I have to boot into TWRP and re install the rom WITHOUT MAGISK. Then it works.

But when I install MAGISK 21.1 I get again bootloop to fastboot. Any idea how to fix it?

thanks!

------------

PROBLEM FIXED using this strategy: https://xiaomi.eu/community/threads/magisk-in-mi-note-10.58047/#post-568116
 
Last edited:
  • Like
Reactions: Poney70
Dual apps is working well in K30 5G as workplace mode.
But sometime dial caller is not display caller history, contact can not sync.
Still wait the next update version.
 
When you return home, perhaps there is another network (maybe stronger) which tries to connect, but fails, leaving no connection.
In the UK, my ISP has an app which allows me to specify which connection should be the dominant one for home. Perhaps you have the same?
you did not understand me, when i leave the house the wifi switches off ... and when i come home it is not seen, wifi stays off. although the setting switch wifi on automatically is active.
 

Attachments

  • Screenshot_2020-12-13-13-44-47-772_com.android.settings.jpg
    Screenshot_2020-12-13-13-44-47-772_com.android.settings.jpg
    240.4 KB · Views: 217
you did not understand me, when i leave the house the wifi switches off ... and when i come home it is not seen, wifi stays off. although the setting switch wifi on automatically is active.
In comparison, I have both 'Select best networks automatically' and 'Traffic mode' (Regular) switches 'on' on my system.
I tend to control my data usage by switching it on and off myself.
 
Does anyone know how to fix the unknown caller issue with VoLTE calling on this version ? I'm using POCO F2 Pro on both ends the calls are made ok but I'm allways getting the unknown caller on the receiving phone (doensn't matter which way the call is made).

Yes magisk and volte enabler module worked for me ( VoLTEnabler_1.0.zip )
 

Attachments

  • Screenshot_2020-12-13-14-18-37-295_com.android.settings.jpg
    Screenshot_2020-12-13-14-18-37-295_com.android.settings.jpg
    256.6 KB · Views: 250
  • Screenshot_2020-12-13-14-19-12-633_com.topjohnwu.magisk.jpg
    Screenshot_2020-12-13-14-19-12-633_com.topjohnwu.magisk.jpg
    309.7 KB · Views: 233
In comparison, I have both 'Select best networks automatically' and 'Traffic mode' (Regular) switches 'on' on my system.
I tend to control my data usage by switching it on and off myself.
But that is the wifi option which is switched off as soon as there are no known wifis in the vicinity. and as soon as a known network is found it turns on.
 
Once again ...
With the twrp you use you can't do nothing now , you have to change twrp and perform a clean install ..
Follow exactly steps below please , just one time , do not copy-flash-wipe like a maniac..
Download this twrp and flash it via fastboot ..
Enter twrp , Advanced / Format data / type yes and hit enter ..
Go back to main twrp menu and choose , Reboot / Recovery ( phone will be enter to twrp again ) ...
Connect to pc and copy rom zip at memory..
Choose , Wipe / and swipe cursor right to factory reset ..
Go back to twrp main menu and choose , Install / choose the rom zip ..
Swipe to confirm flash...
When installation finish choose left button to Wipe cache and dalvik ..
Reboot system ..
Done ..
after use miflash to flash stock. it works
 
Yes magisk and volte enabler module worked for me ( VoLTEnabler_1.0.zip )

Are you sure it will fix the unknown caller problem ?
From what I read it just enables the options (by changing options in build.props file) - I allready have a working VoLTE connections. Just the receiving end doesn't know whos calling.
 
  • Like
Reactions: toxiq
Hi in this version I have problems with the contrast of the phone (Grus). I don't know if it's a phone or ROM problem
 
My device Mi10, why can I see only one option to set DND sessions? I'd like to set different times for weekdays and weekends but this does not seem to be possible anymore.
 
  • Like
Reactions: Spill
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
41K
Replies
51
Views
36K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
38K
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
32K