MIUI 12.3 20.11.11/12


Do you like this MIUI version?

  • Total voters
    213
Status
Not open for further replies.
doclucas said:
@ingbrzy

I was wondering why the updater never works on my MI9 LITE but does on other Xiaomi model, so I checked with Logcat and found a bug in the updater. The updater is using the wrong sourceforge URL for MI9Lite CC9 and that's why it always fails to download with "mirrors offline" error.
For example, the URL it directs to this week is:

However the correct URL syntax is:

Note the difference: MICC9 vs MI9LiteMICC9

Please kindly fix this.
Click to expand...
My bad I added pyxis under both names and the short one was the first one, fixed, thanks!.
 
  • Like
Reactions: doclucas, hjirik, ingbrzy and 1 other person
gkalen said:
On Poco f2 Pro , try to boot at new twrp at first post ..
fastboot boot twrp.img
Phone must be boot to twrp , then reboot to system ..
Click to expand...

Hi
I don't really understand what's going on. It is impossible to enter the trwp.
If I just restart, there is no problem, the system recovers.
If I try to restart on twrp, the system will simply freeze on startup in the Poco logo.
I can get into fastboot but I can't get it to execute the fastboot boot twrp.img instruction. I also can't flash any twrp. The only way to recover the system, is to press the 3 buttons simultaneously and access that menu in Chinese and selecting the 2nd button, it starts up for the system. I think it is the bootloader test menu.
I believe that the way it is, the only way will be to use the mi flash and install the original
 
joaojacinto said:
Hi
I don't really understand what's going on. It is impossible to enter the trwp.
If I just restart, there is no problem, the system recovers.
If I try to restart on twrp, the system will simply freeze on startup in the Poco logo.
I can get into fastboot but I can't get it to execute the fastboot boot twrp.img instruction. I also can't flash any twrp. The only way to recover the system, is to press the 3 buttons simultaneously and access that menu in Chinese and selecting the 2nd button, it starts up for the system. I think it is the bootloader test menu.
I believe that the way it is, the only way will be to use the mi flash and install the original
Click to expand...
This chinese is mi recovery ..
Same here too but i don't have problem to boot in twrp by fastboot ..
This issue you describe it starts when you flash over the 0623 twrp after 20.10.15/16 , with previous 20.9.24 all working fine ..
So after 20.10.15/16 everyone should have to do fastboot boot twrp.img to enter twrp , a lot of users unfortunately misunderstanding and do fastboot flash recovery twrp.img ..
After that started the issue of failed to load authenticate boot.img because of kernel changes ..
 
  • Like
Reactions: Ted presley
Poco F2 Pro updated from 20.11.5 to 20.11.12 with TWRP-3.4.2 B-0623

- dowloaded rom
- deleted recovery.img inside zip-file (Fimware-update\recovery.img 128mb)
- boot into twrp via powermenu
- wipe cache/dalvik
- flash rom
- delete data/system/package-cache via twrp file manager
- wipe cache/dalvik again
- Boot to system

Works perfect, and I can boot into twrp via powermenu without problems :)
 
  • Love
  • Like
Reactions: Moaka, sw3ety, steffg and 1 other person
gkalen said:
This chinese is mi recovery ..
Same here too but i don't have problem to boot in twrp by fastboot ..
This issue you describe it starts when you flash over the 0623 twrp after 20.10.15/16 , with previous 20.9.24 all working fine ..
So after 20.10.15/16 everyone should have to do fastboot boot twrp.img to enter twrp , a lot of users unfortunately misunderstanding and do fastboot flash recovery twrp.img ..
After that started the issue of failed to load authenticate boot.img because of kernel changes ..
Click to expand...

Exactly
Only i dont understand why cant get twrp by fastboot command. That's the first thing I tried
 
joaojacinto said:
Exactly
Only i dont understand why cant get twrp by fastboot command. That's the first thing I tried
Click to expand...
Μaybe you flash the 0623 twrp accidentally ..

If i had the same issue i will trying to do ...
Download 20.9.24 , extract the boot.img and put it in adb folder
where you have the twrp 0623 ..
Connect your device in fastboot mode , open a cmd and write ..
fastboot devices ( cmd will recognise device )..
fastboot flash boot boot.img
fastboot reboot ( hit enter and hold volume down button so the device will return again to fastboot mode )..
fastboot devices ( again recognition of device )..
fastboot boot twrp.img ( use the twrp 0623 for this step )..
Wait until device load twrp ..

EDIT
If it won't work by changing this boot.img and issue still remains , you must extract the boot.img from rom 20.11.12 and flash it to your device to boot again ..
So if something goes wrong , put boot.img file from 20.11.12 rom in adb folder , connect to fastboot mode and write in cmd ..
fastboot devices ( device recognition )..
fastboot flash boot boot.img
fastboot reboot
That's it , watch the steps ..
 
  • Like
Reactions: Mcduckii
dewingerd said:
Poco F2 Pro updated from 20.11.5 to 20.11.12 with TWRP-3.4.2 B-0623

- dowloaded rom
- deleted recovery.img inside zip-file (Fimware-update\recovery.img 128mb)
- boot into twrp via powermenu
- wipe cache/dalvik
- flash rom
- delete data/system/package-cache via twrp file manager
- wipe cache/dalvik again
- Boot to system

Works perfect, and I can boot into twrp via powermenu without problems :)
Click to expand...

thats the same i did last night, with my poco f2, and works like a charm :)
 
gkalen said:
Μaybe you flash the 0623 twrp accidentally ..

If i had the same issue i will trying to do ...
Download 20.9.24 , extract the boot.img and put it in adb folder
where you have the twrp 0623 ..
Connect your device in fastboot mode , open a cmd and write ..
fastboot devices ( cmd will recognise device )..
fastboot flash boot boot.img
fastboot reboot ( hit enter and hold volume down button so the device will return again to fastboot mode )..
fastboot devices ( again recognition of device )..
fastboot boot twrp.img ( use the twrp 0623 for this step )..
Wait until device load twrp ..

EDIT
If it won't work by changing this boot.img and issue still remains , you must extract the boot.img from rom 20.11.12 and flash it to your device to boot again ..
So if something goes wrong , put boot.img file from 20.11.12 rom in adb folder , connect to fastboot mode and write in cmd ..
fastboot devices ( device recognition )..
fastboot flash boot boot.img
fastboot reboot
That's it , watch the steps ..
Click to expand...
Thank you. I'll try it as soon as I get home
 
DriV28 said:
Hi Community,

i recently upgraded to Android 11 (Beta) but if I pull down the new notification bar (control center) my phone starts to freeze. I can access reboot menu and have to restart my phone..

If i change back to old notification style its works normally.

Ithought that the new Update (20.11.12) will fix this issu but it didn't.

Any suggestions?

Mi9T
Click to expand...
in control center setting there is option called smart change it to None , i dont remember the option name cause i downgrade to stable android 10 but that was happen to my when i was in android 11
 
  • Like
Reactions: mrumais, Poney70 and DriV28
Honestly, I feel like the "Fix" TWRP for lmi, cmi, umi created more problem than fix. In anyway, update new rom is not faster than boot the twrp from command......
 
  • Like
Reactions: delboy and Iain_B
ingbrzy said:
About TWRP issue for cmi/umi/lmi: it has been fixed by new TWRP builds for these devices - download these builds here: Mi 10 Pro, Redmi K30 Pro, Mi 10.
If you are flashing our ROM first time - flash these recoveries ONLY AFTER FLASH 20.10.15 and above for cmi/lmi, AFTER 20.11.5 for umi - otherwise you will get infinitive blinks on TWRP splash! Your recovery will be replaced automatically during 20.11.11/12 install as well. These TWRP builds don't support /data decryption - next updates have to be installed via USB-OTG (adb sideload doesn't work).
Starting this week Xiaomi has changed beta release strategy - our Friday MIUI releases will be based on Wednesday builds, not Thursday!
Android 10 releases this week = 20.11.11, Android 11 = 20.11.12
Click to expand...

About TWRP and next update with USB-OTG. i know that instalation of MIUI it should be to download rom and restart to twrp and then to install.
but several times i did update by Upader app and installation pass well. So if we have this working TWRP on mi10, lets say. but we cant install from twrp because of no data decryption, why it would not be possible to install update by updater app?
 
gkalen said:
Power of the phone then hold all 3 buttons vol+ , vol- and power and phone will enter at twrp ..
With this twrp you need usb otg for next update and you will be fine..

EDIT
If i saw a screenshot of your commands and fails i will understand better your issue , I'm pretty sure that somewhere you made a mistake ..
My Mi 10 don't act like that ..

EDIT
If this don't work and enter to mi recovery try to open settings , go to my device and miui version to make an update through updater process , choose to install the rom and automatically will boot into twrp , you don't have to flash something , just reboot to system again and you'll be able to enter twrp by powermenu or buttons next time..
Click to expand...
Hello then from updater I was able to enter the twrp that does not read any data to update to 20.11.12 I put the zip file in usb then with otg cable I connect it to the smartphone I enter in twrp I install and update? Thanks
 
  • Like
Reactions: jesuslinuesa
Hello, I'm new here I've a redmi note 7 pro with chinese rom 12.02
Could any one please give me a tutorial or guide to move to the global rom please
Looking to hear from you
 
DriV28 said:
Hi Community,

i recently upgraded to Android 11 (Beta) but if I pull down the new notification bar (control center) my phone starts to freeze. I can access reboot menu and have to restart my phone..

If i change back to old notification style its works normally.

Ithought that the new Update (20.11.12) will fix this issu but it didn't.

Any suggestions?

Mi9T
Click to expand...
did you activate the easter Egg ? on my MI9T it freeze after i have this cat controll under the control center
 
  • Like
Reactions: Poney70
Sylar82 said:
in control center setting there is option called smart change it to None , i dont remember the option name cause i downgrade to stable android 10 but that was happen to my when i was in android 11
Click to expand...
Ok that helped. I changed it to none and after that i can change it to what i want wihtout freezing. Thank you.
 
Hi! Good job on this room! But you know how actívate the call recorder in the menu? I did but It doesnt work. Help anyway. Thanks
 
Status
Not open for further replies.

Similar threads

ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
333K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
35K
HyperOS
emre_66
E
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
44K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
53K
HyperOS
KGVER
KGVER
Top Bottom
Back