HyperOS 1.0 24.7.28 (Final)


Status
Not open for further replies.
These models can be upgraded from DEV to the Stable version (i.e. without loss of user data)
All the ROMs mentioned in the post are intended for safe migration to Stable.

Xiaomi 14: xiaomi.eu_HOUJI_OS1.0.45.0.UNCCNXM_14.zip
Xiaomi 12: xiaomi.eu_CUPID_OS1.0.7.0.ULCCNXM_14.zip
Poco F4 GT/Redmi K50G: xiaomi.eu_INGRES_OS1.0.4.0.ULJCNXM_14.zip
Xiaomi 12s Ultra: xiaomi.eu_THOR_OS1.0.7.0.ULACNXM_14.zip
Redmi K60/Poco F5 Pro: xiaomi.eu_MONDRIAN_OS1.0.12.0.UMNCNXM_14.zip
Xiaomi 12TPro / K50 Ultra: xiaomi.eu_DITING_OS1.0.7.0.ULFCNXM_14.zip

Xiaomi 12s: xiaomi.eu_MAYFLY_OS1.0.8.0.ULTCNXM_14.zip
Xiaomi 14 Pro: xiaomi.eu_SHENNONG_OS1.0.48.0.UNBCNXM_14.zip
Redmi K60 Pro: xiaomi.eu_SOCRATES_OS1.0.11.0.UMKCNXM_14.zip

Other models will be gradually released until the end of September.

Is mean that I update the stable rom from DEV rom using the method that update weekly rom is OK?
 
  • Haha
Reactions: MeiGuddet
Is mean that I update the stable rom from DEV rom using the method that update weekly rom is OK?
Guys it DOESN'T matter WHICH DEV ROM you are on, because the stable rom provided is NEWER then 24.7.28 and below. The reason why previously we need to wipe data to install stable is because we are going from Newer rom to a older Rom. These "Bridging" roms is release so that we can safely migrate over to the Stable builds.
 
Is it me that i did something wrong with the update? Or the updater.app is kinda stuck?

I successfully installed stable 1.0.48 - everything went well , but again the updater shows the same version as an "update"..

@gogocar62
 

Attachments

  • Screenshot_2024-08-16-12-15-17-427_com.android.settings.png
    Screenshot_2024-08-16-12-15-17-427_com.android.settings.png
    80.8 KB · Views: 250
  • Screenshot_2024-08-16-12-14-45-372_com.android.updater.jpg
    Screenshot_2024-08-16-12-14-45-372_com.android.updater.jpg
    193.1 KB · Views: 220
I had the same thing.
Clear the "Update" app data and then restart your device.
If the problem is not solved, repeat the process in maybe an hour.
 
  • Love
Reactions: KGVER
However, as I pointed out several times in the DEV release thread, Bluetooth LE Audio is no longer available in either DEV or Stable channel ROMs since around June.

Do eurom developers have any information about this here?
If this is a change intended by Xiaomi and not something that can be fixed without Xiaomi fixing it, it may be something that can't be helped...
I'm not sure what the exact version was, but there was a dev version that had bad BLE code which caused the whole BT adapter to crash in some scenarios. That's why Xiaomi pushed a hot fix ROM where they had just disabled the LE audio feature. Since then, I have never heard of the problem anymore (I don't use BLE much), but it seems like Xiaomi has just ignored it.
 
Is it me that i did something wrong with the update? Or the updater.app is kinda stuck?

I successfully installed stable 1.0.48 - everything went well , but again the updater shows the same version as an "update"..

@gogocar62
I also use Shennong and successful update from DEV to 1.0.48.0 STABLE but updater not show same update as you
 
  • Like
Reactions: KGVER
Could you share screenshot of 'what's new'
Changelog in Updater app doesn't show the whole changes, especially for stable ROMs. For stable ROMs it's combined in "General optimizations, fixes and latest translation updates".
You have to use Google to find more informations.
 
  • Like
Reactions: KGVER
I was update with latest rom at NUWA . Now my wallet is not working. Not meeet security.
How to solved
 
  • Like
Reactions: Iain_B
Update the inject APK via settings
b71dbad36dba052b412923df424a72b6.jpg


Gesendet von meinem 2210132G mit Tapatalk
I had already updated to the 2024.08.14, but didn't realise there was a 2024.08.16.
I've updated again, and shall check it when I next shop.
 
  • Like
Reactions: mav744
How did you come up with that? What does Redmi Note 12 Turbo have to do with ""weekly/DEV" ROMs. They were never released for this device.
This device is supported on Stable ROM.
 
It has been many years using weekly (since Xiaomi MI4), now it will be time to update more slowly. thanks to the whole team.
 
  • Like
Reactions: ingbrzy
Hi guys, I have a question. Is it possible to check the md5 checksum. I want to check it but I can't find the MD5 Code, so i can compare them
 
I am having trouble after updating from DEV to bridage ROM with Xiaomi 14 Pro (shennong).
After the update I can boot into HyperOS just fine, but after that I boot into TWRP to wipe cache and Dalvik cache.
Now I am stuck with bootloop to TWRP, with TWRP showing "fs_mgr_mount_all" error.
I tried to reinstall the ROM several times, wipe data and cache, but no success so far.
Do you guys have any idea on how to resolve this?

It even failed when I try to do factory reset

Edit: Can boot into hyperos after the install with data format
 

Attachments

  • 455599202_875345221142370_1783016335428267203_n.jpg
    455599202_875345221142370_1783016335428267203_n.jpg
    145.4 KB · Views: 124
Last edited:
Hi guys, I have a question. Is it possible to check the md5 checksum. I want to check it but I can't find the MD5 Code, so i can compare them
Seriously? Link to sourceforge is in first post, on sourceforge page there is an i-button on the right. Click on it.
 
Thank you so much for your work!

I am very surprised that Xiaomi 12 etc get an update sooner than Xiaomi 13

Apparently the Xiaomi 13 is extremely different from 14,12
 
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
Replies
51
Views
45K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
53K
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
35K