MIUI 12.5 20.12.28/29


Do you like this MIUI version?


  • Total voters
    413
Status
Not open for further replies.
Gingko redmi note 8 - just dirty-flashed xiaomi.eu_multi_HMNote8_21.1.6_v12-11.zip Grateful, it booted without any problems, yet.
Only two slightly disturbing things:
  • Security level still Nov.2020
  • Qualcomm data collection (what should that be good for? Ah yeah, of course only to my best interest - understand!)
Thanks for the work Devs!!

Where did you download the Xiaomi EU file from?
 
You don't have to disable adaway, just allow a few Amazon-related sites. For me (using amazon.de) these are:
appx.transient.amazon.com
fls-eu.amazon.de
m.media-amazon.com
I only tried to allow : fls-eu.amazon.fr, and it works, nice, thanks a lot frofa !
 
here they are
 

Attachments

  • Schermata 2021-01-08 alle 16.33.36.png
    Schermata 2021-01-08 alle 16.33.36.png
    73.4 KB · Views: 438
My MI 9 stopping charging on wireless charger, can somebody help me? It stop for few seconds then start charging again.

EDIT: Original Wireless charger from Xiaomi with original Charger what was in package with phone
Same on my Mi9. Let's see if it's better on 21.1.6. It's downloadable.
 
  • Like
Reactions: mankokoma
How do I flash this TWRP on my ginkgo? Through ADB or??

I already have the previous TWRP installed
Through adb or through twrp ..
If you try with adb ..
fastboot devices ( device recognition )
fastboot flash recovery twrp.img ( twrp's installation/flashing )
fastboot reboot ( hit enter and hold volume + continuously until enter twrp )
Do not try to boot with command .. fastboot boot twrp.img cause they reported some issues ..
Anyway you should have a backup because if you have decryption issues , format data will be needed..

EDIT
TWRP FOR REDMI NOTE 8 ginkgo ( android 11 )..
Look at this post ..

EDIT 2
There is also available twrp for gauguin devices , made some tests , we need a recovery custom rom to test further , though it seems that it works good ( just to be 100% sure ) ..
 
Last edited:
  • Like
Reactions: geoanto555
It's a bit off topic, but not that much, so I give it a try :D
Do you guys know a software or addon to resume downloads on sourceforge/androidfilehost?
Everything I tryed fails
Thanks
 
How do I flash this TWRP on my ginkgo? Through ADB or??

I already have the previous TWRP installed
I put the .img-file on my EXTERNAL sdcard (which doesn't have to be decrypted) and flashed it just in the old TWRP with "flash image" as "recovery". Rebooted to recovery - there it was and decrypting the data-partition after inputting PIN. Finally could dirty flash the rom of today without formating anything!!
 
I put the .img-file on my EXTERNAL sdcard (which doesn't have to be decrypted) and flashed it just in the old TWRP with "flash image" as "recovery". Rebooted to recovery - there it was and decrypting the data-partition after inputting PIN. Finally could dirty flash the rom of today without formating anything!!
Any issues with the build? Any changes noticeable? What is the Qualcomm Data Collection you mentioned?
 
  • Like
Reactions: mankokoma
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.6.24/29
Replies
80
Views
37K
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
Replies
51
Views
45K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
54K