MIUI 12.5 20.12.28/29


Do you like this MIUI version?


  • Total voters
    413
Status
Not open for further replies.
View attachment 33797
MIUI 12.5 (umi) Password Manager sync not work, sayed This feature isn't supported on this device... why can it be? bug? how to fix?
I have gone through the process on my Mi 10 (umi), and had to log onto my Xiaomi account, and then reached the same page as you. It therefore seems to be working for me:
[Edit: Because it is working for me, I do not know how to fix it!]
[Edit 2: I note that whereas my picture is a screenshot, yours is not - it is a photograph.]
 

Attachments

  • Screenshot_2021-01-05-21-05-48-120_com.miui.cloudservice.jpg
    Screenshot_2021-01-05-21-05-48-120_com.miui.cloudservice.jpg
    172 KB · Views: 364
Last edited:
Is your phone showing any signs of it not working as expected? Are you getting corruptions, or error messages?
These would tell you if there is a 'need' to do it.
If you feel that it just needs 'refreshing', then you could do a Factory reset, for instance within TWRP. This would set everything back to its initial and default state (while probably leaving all of your files intact). Whereas a Factory reset from within the system (Settings) would erase everything.
I do not think that anything extra would be gained from a clean installation above a factory reset (unless there are obvious corruptions).
Thank you for your clear explanation. Actually I do not have any issue, just I was thinking if changes I made to try do it faster and optimize battery were good changes. And I not sure if with several updates there are files useless, you know.

Maybe when I have time to restore I will try TRWP reset. Thank you.

Sent from my MI 9 using Tapatalk
 
  • Like
Reactions: Iain_B
Full screen display gesture does not work on 20.12.30 build. I have a 9t pro (K20 Pro).
It works if you set MIUI Launcher (or POCO Launcher) as default launcher in phone's settings. Blame Xiaomi devs for not properly updating their framework for Android 11. ;)
 
  • Like
Reactions: AaronCoyco
Hi, I am on Mi9SE... now I also put the latest EU ROM on my Phone. But every time I did this (also on Mi6), I lost Widevine Level 1... it goes to WV3... I tried with many ROMs down to Android 9, but it was always WV3... is there a possible way to install EU ROM without losing Widevine Level 1? I always hat to Format Data to bring the Rom to Life... thank you

Is there a small helpful answer for me out there? :)
 
I have gone through the process on my Mi 10 (umi), and had to log onto my Xiaomi account, and then reached the same page as you. It therefore seems to be working for me:
[Edit: Because it is working for me, I do not know how to fix it!]
[Edit 2: I note that whereas my picture is a screenshot, yours is not - it is a photograph.]
I added a frame to the screenshot :) therefore photo. You are not the first person to tell me this works. I'm wondering why it doesn't work for me, and what could it be connected with. I flashed rom it clean. :( Thanks for ansver, i will try more...
 
Last edited:
I added a frame to the screenshot :) therefore photo. You are not the first person to tell me this works. I'm wondering why it doesn't work for me, and what could it be connected with. I flashed rom it clean. :( Thanks for ansver, i will try more...
I wonder if it is something to do with the Mi account? Maybe something has happened in the past, and it is protecting a potential problem in creating a new / different password account?
 
I wonder if it is something to do with the Mi account? Maybe something has happened in the past, and it is protecting a potential problem in creating a new / different password account?
I don’t even know, I’ll try to register another Mi Account
 
I have a davinci as well with TWRP 3.3.1-0 and when rebooting with this update it returns "System" failure and looping orange screen during boot. If I flash 20.12.10 it's ok
i have mi9tpro(raphael) with last update 30\12 and i have system failture 07 when flash in twrp
 
I have the same problem. Help please
This seems to be tied to the wallpaper in use somehow. When I first flashed the updated, first thing I did was change to the new mountains super wallpaper. I noticed the greyscale was gone. After a few days I changed my wallpaper to a personal picture and noticed greyscale was back. I just changed it back to the mountain super wallpaper and again, greyscale is gone in bubbles.

Sent from my Mi 10 Pro using Tapatalk
 
  • Like
Reactions: Poney70
Does anyone find a fix for wifi on mi 9. Tried all recovery's and clean install, format data,reflash again,and no wifi.

Sent from my MI 9 using Tapatalk
It seems there are 2 versions of WiFi adaptor as you said before. I tried everything too. I bought Mi 9 on release day, so maybe first pieces have different WiFi adaptor.

Sent from my MI 9 using Tapatalk
 
Do you mean apps update or rom update ?

Sent from my Mi 10 using Tapatalk

Please think about your question. I think you can answer it by yourself. If you use the search function you will find a workround, coz this topic is mentioned about 3697 times and some ROMs have already got an update.
 
Last edited:
Hello and happy new year everyone!
First of all thanks to all developers for the new rom. Runs smooth for now.
I am using Mi10pro and currently I have a battery drain problem. When I check the power usage, I saw that most of the battery is drained by Android Core Apps. I did not have any drain problems before this latest update. I wonder if this is a rom related problem and should wait for the next update to get it fixed or is there anything else I can do to stop this draining problem. If anyone else having this problem and knows any solution, I would really appreciate the help.
Thank you in advance!
Anyone else having this problem or knows solution ?
 
Status
Not open for further replies.

Similar threads

  • Locked
HyperOS 1.0 24.6.24/29
Replies
80
Views
37K
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
Replies
51
Views
45K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
54K