MIUI 12.0 MIUI 12 STABLE RELEASE


Do you like this MIUI version?

  • Total voters
    4,215
Status
Not open for further replies.
Appelsap said:
Awesome. Had previously already installed (and hidden) Magisk and the CTS fix, which showed the CTS test was good. In airplane mode cleared Google and Google play, rebooted but still no Netflix or Disney+. It was also clearing the Google Play Services data that did the trick, now both apps are back and being installed as I type this :) Big thumbs up to Poney and you for solving this riddle, thanks!
Click to expand...
Happy that you fixed... On mine everything looks fine but Google pay is denying every payment I make :(

Inviato dal mio Xiaomi device utilizzando Tapatalk
 
Last edited:
I have a problem with the screen refresh rate on a xiaomi mi 11 lite 5G with 12.5.3 I have 90Hz selected, but after several days, the screen starts working at 60Hz even though 90Hz is still selected, the only way to get it back at 90Hz is restarting the mobile phone. Changing from 90 to 60 and back to 90 does not work, you have to restart. Does anyone know what happens? Thanks.
 
minzanaruk said:
which one i need to back up in twrp ?
Click to expand...
Backup "Data" partition first then backup "Internal Storage" if you want. :)

If you want to restore it: Reinstall the Weekly version first, format data then reboot your device and finish the first configuration wizard. After that, you can restore your "Data" (and "Internal Storage") backup in TWRP. ;)
 
  • Like
Reactions: JiaiJ
Stop receiving sms, restarting the device helps, but only for a few minutes. It is the latest stable version 12.5.1
Is there any fix?
 
Andi17 said:
Is it possible to do a dirty flash from stable to weekly?
Click to expand...
It is definitely possible, but not guaranteed that the device will work afterwards.
Seriously, it is mandatory to format data switching from stable to weekly.

Послато са Mi 10 помоћу Тапатока
 
  • Like
Reactions: Andi17
Hi all. I just installed Xiaomi. HMNote9ProEU_V12.0.4.0.RJZMIXM_v12-11on my joyeuse and gestures are no longer working. When I turn them on it does nothing, a reboot brings back the buttons. Anyone got a solution?
 
I too had issues with CTS after last flash; can confirm that Poney's Magisk module fix solves the issue easily. I'm new to Xiaomi.eu (and Xiaomi in general for that matter) but this project really captured my interest and I decided to join the fun.
I got 2 immediate questions: 1) Why is everyone instructing to install Magisk via recovery when official Magisk strongly recommends installing it via patching boot images over the recovery method? I've installed Magisk via patched boot image flashed in fastboot and it works flawlessly
2) The CTS fix Magisk module says it changes "ro.product.model" prop. Was it really that simple? Would a simple line edit in build.prop yield the same result?
 
DanteKG said:
I too had issues with CTS after last flash; can confirm that Poney's Magisk module fix solves the issue easily. I'm new to Xiaomi.eu (and Xiaomi in general for that matter) but this project really captured my interest and I decided to join the fun.
I got 2 immediate questions: 1) Why is everyone instructing to install Magisk via recovery when official Magisk strongly recommends installing it via patching boot images over the recovery method? I've installed Magisk via patched boot image flashed in fastboot and it works flawlessly
2) The CTS fix Magisk module says it changes "ro.product.model" prop. Was it really that simple? Would a simple line edit in build.prop yield the same result?
Click to expand...
Hello,

1) Installing Magisk (zip file) in your custom recovery is a valid way to install it and it's really more fast & easy than manually patching the boot.img of the ROM. ^^

2) Yes, it's really that simple... And "Would a simple line edit in build.prop yield the same result?" = Yes and that's what my zip version for TWRP do => https://xiaomi.eu/community/threads/21-9-1.62961/post-626475

;)
 
  • Like
Reactions: DanteKG
Poney70 said:
Hello,

1) Installing Magisk (zip file) in your custom recovery is a valid way to install it and it's really more fast & easy than manually patching the boot.img of the ROM. ^^

2) Yes, it's really that simple... And "Would a simple line edit in build.prop yield the same result?" = Yes and that's what my zip version for TWRP do => https://xiaomi.eu/community/threads/21-9-1.62961/post-626475

;)
Click to expand...
Oooh I didn't see that post, thanks! Considering how many people seek to pass SafetyNet attestation and the importance of this fix, I feel like this should be added to the OP. Thanks Poney <3

If it doesn't work the phone will boot to recovery and you will have to flash the nightly again.
Click to expand...
To add to this, the phone boots to recovery if it fails to load OS. Before flashing again you could try to format data first and see if that helps
 
  • Like
Reactions: Poney70
Hello guys, since today I can't use Google pay anymore. I used it for month and today suddenly it's not usable anymore. It says, that my phone is not Google protect certified. I didn't chance anything. I am using a Mi Note 10 Lite, no root no magisk, stick xiaomi.eu firmware 12.5.1
 
eugenwollekneul said:
Hello guys, since today I can't use Google pay anymore. I used it for month and today suddenly it's not usable anymore. It says, that my phone is not Google protect certified. I didn't chance anything. I am using a Mi Note 10 Lite, no root no magisk, stick xiaomi.eu firmware 12.5.1
Click to expand...
Hello,

Google has recently (yesterday) updated its SafetyNet thing (system that try to detect unlocked bootloader and uncertified ROMs)... :(

I gave a workaround to trick SafetyNet here => https://xiaomi.eu/community/threads/21-9-1.62961/post-626475

;)
 
Google play services drains the battery alot bere on 10ultra 12.5.5.
How this can be fixed.
d22254cbb44f49a985c5199e9451c9c4.jpg


Sent from my M2007J1SC using Tapatalk
 
cidsairo said:
Is the POCO F3 12.5.6 stable, the enhanced edition version? Please enlightened me? Thanks.
Click to expand...
Yes it is an "enhanced edition"


  • MIUI12.5 O.6.Enhanced
    • Swift performance. More life between the charges.
    • Focused algorithms: Our new algorithms will dynamically allocate system resources based on specific scenes, ensuring smooth experience on all models.
    • Atomized memory: Ultra-fine memory management mechanism will make RAM usage more efficient.
    • Liquid storage: New sensitive storage mechanisms will keep your system vibrant and responsive as time goes by.
    • Bug fixes and system optimizations.
 
gogocar62 said:
Yes it is an "enhanced edition"


  • MIUI12.5 O.6.Enhanced
    • Swift performance. More life between the charges.
    • Focused algorithms: Our new algorithms will dynamically allocate system resources based on specific scenes, ensuring smooth experience on all models.
    • Atomized memory: Ultra-fine memory management mechanism will make RAM usage more efficient.
    • Liquid storage: New sensitive storage mechanisms will keep your system vibrant and responsive as time goes by.
    • Bug fixes and system optimizations.
Click to expand...
Thanks for the fast reply. But why i cannot find the RAM extension. And battery optimization?
 
Status
Not open for further replies.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
952
Views
391K
HyperOS
PervizMikail
PervizMikail
ingbrzy
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
35K
HyperOS
emre_66
E
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
340K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
45K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
44K
HyperOS
Mistery88
M
Top Bottom
Back