Flashtool Rom Xiaomi.eu

[Showman]

and is it true? how i can be sure about this? what forum says about this? between 4pda and loxar wich is better? however it's working fine. Also battery is very good ( battery runs out fast from 100% to 90%, but i arrive about 15% with 5-6 hours screen on!)

There should be no root and 3rd party appls/tools - Mi apps and Google Play with Google Keyboard only

 

[loxar]

6.1.29 Update Ready

https://mega.nz/#!HIYTTKrZ!JYVNYHLUpR_YZtW7XE8mpQJDHTuLziENlfIgCnL7aus

Only SuperSU Root and XperiaKeyboard

 

[EseLoKo]

6.1.29 Update Ready

https://mega.nz/#!HIYTTKrZ!JYVNYHLUpR_YZtW7XE8mpQJDHTuLziENlfIgCnL7aus

Only SuperSU Root and XperiaKeyboard

Thank you so much. Is there any "important" (like wifi I read) bug in this ROM?

 

[smallfoxvn]

Hi guys, Im encountering a problem with fingerprint. It works at first but after some hours leaving the fone in standby mode it cannot read my fingerprints. I couldnt even add another fingerprint. It`s like the fingerprint driver stopped working or smt because it works again after a simple reboot.
Im currently using 6.1.21 dev. I tried .16 stable but the still encounter the same problem.


Sent from my Redmi Note 3 using Tapatalk

 

[Dutchgio]

Hi guys, Im encountering a problem with fingerprint. It works at first but after some hours leaving the fone in standby mode it cannot read my fingerprints. I couldnt even add another fingerprint. It`s like the fingerprint driver stopped working or smt because it works again after a simple reboot.
Im currently using 6.1.21 dev. I tried .16 stable but the still encounter the same problem.


Sent from my Redmi Note 3 using Tapatalk

A reboot fixes it, I have the same issue sometimes.

 

[Dutchgio]

Thank you so much. Is there any "important" (like wifi I read) bug in this ROM?

There was in .28, that's why they delayed the update and fixed it in .29

 

[jpenzo]

just a quick question for SP FLASH
we need to keep PRELOADER activated if we are with the CHINESE DEV ROM = true ?
for the first jump from STABLE to DEV
and
desactivate PRELOADER from DEV to XIAOMI.ROM = this is right?

Please confirm
i am starting the procedure now

 

[loxar]

No. Please UNCHECK preloader

Gesendet von meinem Redmi Note 3 mit Tapatalk

 

[loxar]

If you flash official Developer from Xiaomi you can Check ☑ Preloader

Gesendet von meinem Redmi Note 3 mit Tapatalk

 

[jpenzo]

If you flash official Developer from Xiaomi you can Check ☑ Preloader

Gesendet von meinem Redmi Note 3 mit Tapatalk

Ok i was Lost, so i am right
IF OFFICAL DEV ROM = preloader is ON
IF XAIOMI.EU Multilanguage ROM = preloader must be OFF imperatively (if on = Bricked phone)

 

[loxar]

YES

Gesendet von meinem Redmi Note 3 mit Tapatalk

 

[jpenzo]

RedMiNote 3 is in Fastboot mode (drivers installed)
SP Flash is Ok , Donwload done
but nothing ! no Yellow bar
i am on Win10

 

[jpenzo]

Done
Press Download, Vol - / power ON and usb pluged
no Fastboot logo
but Yellow bar - download in progress....

 

[Frep]

Done
Press Download, Vol - / power ON and usb pluged
no Fastboot logo
but Yellow bar - download in progress....

I don't press power on but only Vol - and plug in the phone, but it's the same

 

[long-d]

just a quick question for SP FLASH
we need to keep PRELOADER activated if we are with the CHINESE DEV ROM = true ?
for the first jump from STABLE to DEV
and
desactivate PRELOADER from DEV to XIAOMI.ROM = this is right?

Please confirm
i am starting the procedure now

NOOOOOOOOOOOOO, uncheck or you'll brick it

 

[jpenzo]

NOOOOOOOOOOOOO, uncheck or you'll brick it

NO, my phone is FINE
Please check this INFORMATION from the Specialists

case 1 : IF OFFICAL DEV ROM = preloader is ON
case 2 : IF XAIOMI.EU Multilanguage ROM = preloader must be OFF imperatively (if on = Bricked phone)

i am actually doing the case 1 : so preloader was ON and no problem

 

[loxar]

On Windows 10 you installed the right driver?

Gesendet von meinem Redmi Note 3 mit Tapatalk

 

[jpenzo]

On Windows 10 you installed the right driver?

Gesendet von meinem Redmi Note 3 mit Tapatalk

I am in WIN10 64bits version
using the drivers MTK-v1.0.14 with nothing special
i used this procedure from this link
http://en.miui.com/thread-193681-1-1.html

and i did my own with more details

 

[jpenzo]

Dear Loxar
When we are on China DEV like me actually 6.1.29
Can we Flash the System section using the originals files from Xiaomi.eu Rom => ZIP FILES
or we need first to flash you rom , and after the System

i would like to keep the original Xiaomi.eu as possible , no risk of ROM modified for security reason

 

[Dutchgio]

.29 seems to have introduced some random lagg once in a while, or is it just me?
Maybe anyone else can confirm

 

[loxar]

Here With SuperSu Xperia and CenterClockMod

https://drive.google.com/file/d/0B9yRoon2P8DMWmk4ajJXb19kVVU/view?usp=sharing

 

[parfetto]

.29 seems to have introduced some random lagg once in a while, or is it just me?
Maybe anyone else can confirm

I have help some user to install 6.1.29 and he report me some lag and some error.. so , i think is better keep in 6.1.21 and wait next week update. Anyway all you can try it and iff was lag back to 6.1.21 with no problems.

 

[Dutchgio]

Downgrading without flashing userdata so no wipe is possible??
I guess I"ll try that.

 

[parfetto]

Downgrading without flashing userdata so no wipe is possible??
I guess I"ll try that.

Flash only SYSTEM from 6.1.21 all the rest is to untick.

Have you update from 6.1.21 to 6.1.29 ?

 

[matfeb]

I confirm laggs on .29. Where can I find .21 for a downgrade ?
However I don't come from it... Is it going to work ?