- 17 Apr 2019
- 405
- 67
OK, check...Looks good.
You can delete the last Part with Google as we skipped step one we never Lose the verification
OK, check...Looks good.
You can delete the last Part with Google as we skipped step one we never Lose the verification
Cuvetto, upload multilanguage TWRP to mega storage please, I will give link to 1st post. Thanks.I create the TWRP multilanguage. If you want I can send to you!
Cuvetto, upload multilanguage TWRP to mega storage please, I will give link to 1st post. Thanks.
As we skipped changing the fingerprint we never Lose Google integrity verification.If Google Play haven't integrity do this:
-go back to termux
-type su
-type props.
-type 1
-type r to reset to default value
-restart the Phone afterwards
That way you will keep everything. Basicintegrity, Ctsprofile and play protect verification will be gained again.
Look now please. I edited the first post.Didn't meant the last screen but the following part:
As we skipped changing the fingerprint we never Lose Google integrity verification.
And as we never change it there is nothing we can "undo"
Perfect.Look now please. I edited the first post.
Flashing persist.img is not required and is bad advice, IMHO. Really, it should be removed as a suggestion in the instructions.Perfect.
You should probably write into the instructions of the persist.img that you will Lose widevine L1 and go up to L3. I don't know what sideeffects occur with widevine L3 but not telling this if there is no Going back from it is a bit negligently.
Regards
Perfect.
You should probably write into the instructions of the persist.img that you will Lose widevine L1 and go up to L3. I don't know what sideeffects occur with widevine L3 but not telling this if there is no Going back from it is a bit negligently.
Regards
Flashing Persist.img is works well for me. Google Pay payments work perfectly. SafetyNet check is OK. If is true what you are writing about Widevine CDM, I will remove the instructions from the first post. I'll check it out tomorrow.Flashing persist.img is not required and is bad advice, IMHO. Really, it should be removed as a suggestion in the instructions.
As my understanding goes there is no way of Going back from L3 to L1. So even with restoring original persist.img you will stay on L3.Flashing Persist.img is works well for me. Google Pay payments work perfectly. SafetyNet check is OK. If is true what you are writing about Widevine CDM, I will remove the instructions from the first post. I'll check it out tomorrow.
I don't know exactly when this happened, but a backup of the original Persist.img partition was created on the phone's internal storage for me (This happened either when installing the ROM or when installing the Persist.img file).
By installing the original global ROM via flashtool, it should also be possible to restore, right?
And as already mentioned. There is probably no way of getting the Level from 3 to 1 again.A number of video services like Google Play Movies, Netflix, and Amazon Prime Video don’t allow some smartphones to stream movies or TV shows at resolutions higher than 480p. The reason for the lockout is that these services are protected by digital rights management (DRM), to prevent the copying and unauthorized redistribution of these video files.
As it is written as point 2. in the Rom Installation instructions ;-)EDIT: I finally install new ROM from scratch, with wipe -> format data
because i see before someone had successfully updated from V11.0.4.0 (EU fastboot) to V11.0.5.0As it is written as point 2. in the Rom Installation instructions ;-)
Ok I think my question was not clear enough.There is no reason why you would want to got to Level 3 from Level 1.
If you are stuck at L3 tough you surely would want L1 back if you want to stream anything on your Phone.
Well the widevine Level determines how secure your Phone is related to movies and streaming platforms. EG. Are you able to somehow steal what is shown on your screen.
So Netflix, Prime Video and others dont allow Videos to be Played over 480p on phones which are at widevine L3
And as already mentioned. There is probably no way of getting the Level from 3 to 1 again.
Regards.
None of what you mentioned. Flashing the persist.img makes it fall down to L3.Ok I think my question was not clear enough.
What makes the security level fall down to L3?
Is it the bootloader unlock or the installation of twrp?
Gesendet von meinem Mi 10 Pro mit Tapatalk
No, it is a seperate file that was mentioned in the guide in the first post, that you can grab from the official rom and flashing it seperately in order to make Google pay to work.And the persist.img is part of the EU.rom?
Gesendet von meinem Mi 10 Pro mit Tapatalk
YesOk thanks. So if I don't do that because I don't need gpay, I will keep L1?
Gesendet von meinem Mi 10 Pro mit Tapatalk
And if something changes your mind, or you want to use a banking app you can still follow my instructions pasted in the OP as Option B. With that you will keep L1 and still past safetynet.Ok thanks. So if I don't do that because I don't need gpay, I will keep L1?
Gesendet von meinem Mi 10 Pro mit Tapatalk
Perfect.
You should probably write into the instructions of the persist.img that you will Lose widevine L1 and go up to L3. I don't know what sideeffects occur with widevine L3 but not telling this if there is no Going back from it is a bit negligently.
Regards
Flashing persist.img is not required and is bad advice, IMHO. Really, it should be removed as a suggestion in the instructions.
It will show L1 instead of L3 if the certificates are intact.How can I detect a damaged CDM widevine?
Thanks.It will show L1 instead of L3.
We use essential cookies to make this site work, and optional cookies to enhance your experience. Cookies are also used for ads personalisation