MIUI 12.0 MIUI 12 STABLE RELEASE


Do you like this MIUI version?

  • Total voters
    4,215
Status
Not open for further replies.
Just a little request:
Couldn't the battery bar be reintroduced for those devices that have some free space between the camera hole and the top edge?
I used it for years on Mido and Whyred and would like to do it on Joyeuse too.

Thanks.
P.G.
 

Attachments

  • redmi_note_9_pro_tta_10.png
    redmi_note_9_pro_tta_10.png
    73.6 KB · Views: 301
Hi there,

I can't get VOWIFI to work on my MI 10.
VoLTE works. The mobile phone shows VoWIFI but cannot establish a connection and breaks off. I have already tried out a lot of profiles at PDC. I am currently using Commercial_DT. My operator is (A1 Telekom Austria).

Does anyone have a solution for this ?
 
Hi guys, any ideas when the release will be for Mi 11, just got the phone yesterday such a lovely device, tried many androids this is no doubt one of the best, but their ROM in Chinese just kills me. Cheers.
 
Good morning .. Certainly this question or explanation has already been asked ..
What is the best way to update via twrp .. for example update that came out today for the redmi note 9s .. what are the steps?
 
Hi , I have a mi9 t pro with miui11, unlocked bootloader, twrp and magic disk installed. I would like to upgrade to miui 12 but I can't. someone tell me the exact procedure?
 
brunofernandestm said:
ok .. i understood your answer .. my question would be in the sense, if when doing update do it directly, or enter TWRP manually after downloading and do it manually with wipe dalvik & cache, etc ..
Click to expand...
Whichever one you find more convenient.
Me i like to manually flash in TWRP.

Whichever option you choose, ALWAYS remember to clear cache and dalvik-cache after installation
 
  • Like
Reactions: brunofernandestm and gkalen
Hello, I am using "curtana". After performing the 12.0.3 update, there were some problems with the keyboard. Is this general? For example, there is an error on the WhatsApp keyboard as shown in the image. When I want to copy something in Chrome, a black bar appears above. Thank you
34312
 
Happy to report that youtube & maps PIP in Fullscreen gestures now works on the latest mi 10 pro 12.2.3. It's just not as fluid as on miui 11 but fairly useable now. bug on messenger chat bubble is also fixed. But pressing "show as bubble on a contact is still not working (i.e. bubble still is not popping up.) I don't seem to experience any crash on Maps anymore like I used to on 12.2.2. Viber is not disconnecting calls anymore like it used to. I can now move again the floating window on game turbo mode. It's not letting me move it on 12.2.2 which is another weird bug. I just didn't try the dual apps yet but I'm quite positive that it's still not working well. I'm giving my 3 thumbs up for this update. Highly recommended.
 
Last edited:
  • Like
Reactions: f_padia
Google Pay is not working. Device not certified in Google Play Store. No Magisk/Root.

Newest xiaomi.eu build for Mi 10T Lite (12.0.8.0.QJSCNXM).

But on the other side note: fingerprint was not working in the banking app on the official Xiaomi Global rom. With xiaomi.eu it is working without any issues! So far happy with the new rom!!!!
 
Last edited:
Hitardo said:
On my toco, after upgrading to Xiaomi.eu MIUI v12.1.1, on Android 11, I used a custom TWRP, the version 3.4.0-14, produced by Mauronofrio, from the XDA forum:
forum.xda-developers.com

[RECOVERY][3.4.0-14][toco]Unofficial TWRP Xiaomi Mi Note 10 Lite (TEST)

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com forum.xda-developers.com

Before, I used the TWPR v3.3.1, also from Mauronofrio.
Click to expand...
is that better than PBtwrp and you can access storage after formatting data on pc
 
Hello guys,
i tried to update my xiaomi Mi 10 from 12.2.2.7 to 12.2.2.8
1. I remove all PINs and fingerprints
2. Reboot in fastboot
3. I write "fastboot devices" in cmd, and my device appears
4. download and rename TWRP3.4.2.b1206 in twrp.img
5. type cmd command "fastboot boot twrp.img" the phone turns off the screen, makes the sound on the pc that has disconnected and then even if I wait 1 or more minutes the phone remains off
if I unplug it and press the power button it returns to work as before with version 12.2.2.7

where am i wrong?
 
m@c|-|oR said:
You might give it a bit more time.

Послато са Mi 10 помоћу Тапатока
Click to expand...

I tried again waiting up to 10 minutes but nothing, (when I went to 12.2.2.7 it took only 30 seconds)
it's as if the phone turns off completely
 
Ivyn87 said:
Hello guys,
i tried to update my xiaomi Mi 10 from 12.2.2.7 to 12.2.2.8
1. I remove all PINs and fingerprints
2. Reboot in fastboot
3. I write "fastboot devices" in cmd, and my device appears
4. download and rename TWRP3.4.2.b1206 in twrp.img
5. type cmd command "fastboot boot twrp.img" the phone turns off the screen, makes the sound on the pc that has disconnected and then even if I wait 1 or more minutes the phone remains off
if I unplug it and press the power button it returns to work as before with version 12.2.2.7

where am i wrong?
Click to expand...
Step 5: Did you just forget to write it down or did you forget to flash the new twrp?
Code: 
fastboot flash recovery twrp.img

fastboot boot twrp.img
 
Status
Not open for further replies.

Similar threads

ingbrzy
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
29K
HyperOS
emre_66
E
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
140K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
29K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
36K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
31K
HyperOS
KGVER
KGVER
Top Bottom
Back