Just an idea... Some people could no longer root the latest ROMs by using cwm recovery.
What is the output of Show log after installation fails?
Gesendet von meinem Nexus 7 mit Tapatalk
Xiaomi Hongmi TD + WCDMA CWM+ROOT Guide
- Thread starter ingbrzy
- Start date
What is the output of Show log after installation fails?
Gesendet von meinem Nexus 7 mit Tapatalk
Remove that line you see in the updater-script of the rom. I think there are 2 lines with it. Open the rom with 7zip and edit inside.
So don't unzip complete rom, edit file, zip rom.
(or compare updater-script with previous rom)
That assert line checks if phone is HM2013023 (from build.prop). Probably it sees something else.
So don't unzip complete rom, edit file, zip rom.
(or compare updater-script with previous rom)
That assert line checks if phone is HM2013023 (from build.prop). Probably it sees something else.
If the assert error is still there then the updater-script is not changed otherwise you don't get the assert error.
Or you used the original rom again in CWM
Or you used the original rom again in CWM
So not the same error as printscreen above.
I was also referering to the miuiandroid build rom (because of the assert error).
Better to post a new printscreen of de error.
I was also referering to the miuiandroid build rom (because of the assert error).
Better to post a new printscreen of de error.
Last edited:
This means modifying build.prop would not help?
@piovp: Could you please check with Mobileuncle -> Device info in section build.prop if these properties are set?
Gesendet von meinem 2013023 mit Tapatalk
This means the assert line is still in the updater-script. So you are not flashing your modified (with assertline deleted) rom.
I'am not 100% sure but I think assert is not checking against build.prop but to default.prop in the recovery ramdisk.
There is also a logfile in CWM. Should be accessible through advanced menu. There you should also see which props are seen by CWM.
I'am not 100% sure but I think assert is not checking against build.prop but to default.prop in the recovery ramdisk.
There is also a logfile in CWM. Should be accessible through advanced menu. There you should also see which props are seen by CWM.
Last edited:
Maybe there is more information in de logfile.
In most TRWP there is a copy log button under advanced. This will place the log on your storage device. For most devices this will be /sdcard/recovery.log but on some devices it might be in /data/media/recovery.log or wherever your internal storage is located.
You may also be able to find the log in cache. It can either be in /cache/recovery/log or /cache/recovery/last_log
edit:
In TWRP I see ro.product.device=V8 in default.prop. This will be the reason the assert fails.
In most TRWP there is a copy log button under advanced. This will place the log on your storage device. For most devices this will be /sdcard/recovery.log but on some devices it might be in /data/media/recovery.log or wherever your internal storage is located.
You may also be able to find the log in cache. It can either be in /cache/recovery/log or /cache/recovery/last_log
edit:
In TWRP I see ro.product.device=V8 in default.prop. This will be the reason the assert fails.
Last edited:
pjovp
Members
- Aug 5, 2011
- 637
- 67
I found the solution FINALLY!!!
What I was doing was unziping the rom and then change delete the line in the file and then I was ziping the rom in .rar format (xxx.rar).
Then I would change the .rar to .zip and flashed.
What I did now was change the file directly in the zip tree directory without unziping and flashed it and worked.
The unziping and ziping was the issue + that line that I note that in previous releases didn't exist.
Now I lost root and cannot enter in TWRP.
When I do the buttons sequence to enter in recovery I get a black screen full of chinese lines
What I was doing was unziping the rom and then change delete the line in the file and then I was ziping the rom in .rar format (xxx.rar).
Then I would change the .rar to .zip and flashed.
What I did now was change the file directly in the zip tree directory without unziping and flashed it and worked.
The unziping and ziping was the issue + that line that I note that in previous releases didn't exist.
Now I lost root and cannot enter in TWRP.
When I do the buttons sequence to enter in recovery I get a black screen full of chinese lines
That is what I told you before !
And that is because the chinese recovery inside the rom is also installed after boot.
You have to use the chinese recovery to install TWRP again. I think you can use the first post in this thread.
If you want to install the rom again without overwriting recovery you have to delete install-recovery.sh from recovery/etc in the ROM zipfile or remove the line "package_extract_dir("recovery", "/system");" from the updater script.
If you don't install the rom again I think with every reboot the recovery will be overwritten again. Of course you can also remove or rename the same script from /system/recovery/etc in android (root needed).
Se also here
Last edited:
pjovp
Members
- Aug 5, 2011
- 637
- 67
finally root it with
http://xiaomi.eu/community/attachments/root-stable-zip.7012/
Well this wasn't easy although the solution was all in front of me and easy to apply...
Thanks for your help during the process guys
http://xiaomi.eu/community/attachments/root-stable-zip.7012/
Well this wasn't easy although the solution was all in front of me and easy to apply...
Thanks for your help during the process guys
thanks for the guide but i cant get the cwm recovery i follow the instruction but when i flash recovery.img and get asked to reboot into recovery the phone reboot in stock android recovery not cwm
my phone is 4.2.1 hm2013022 wcdma
miui-jhacnah1.0
my phone is 4.2.1 hm2013022 wcdma
miui-jhacnah1.0
