[ROM][JB][4.3][2013-12-29] CyanogenMod 10.2


OK some problems here...
7uvuveje.jpg
rugejyga.jpg


EDIT:
Here adb logcat
Code:
D/ALSADevice(  195): route: devices 0x2 in mode 0
D/ALSADevice(  195): No valid input device: 0
D/alsa_ucm(  195): snd_use_case_set(): uc_mgr 0xb7f69a00 identifier _enadev value Speaker
D/ALSADevice(  195): switchDevice: mCurTxUCMDevivce None mCurRxDevDevice Speaker
I/ALSADevice(  195): es310: txDevice=(null) rxDevice=Speaker
D/ALSADevice(  195): VRMode:0
D/alsa_ucm(  195): snd_use_case_set(): uc_mgr 0xb7f69a00 identifier _verb value HiFi
D/alsa_ucm(  195): Set mixer controls for Speaker enable 1
D/alsa_ucm(  195): acdb_id 14 cap 1 enable 1
D/ACDB-LOADER(  195): ACDB -> send_afe_cal
E/ACDB-LOADER(  195): Error: ACDB AFE returned = -13
D/alsa_ucm(  195): Setting mixer control: SLIM_0_RX Channels, value: One
D/alsa_ucm(  195): Setting mixer control: RX3 MIX1 INP1, value: RX1
I/ActivityManager(  641): START u0 {act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10200000 cmp=com.google.android.gallery3d/com.android.camera.CameraLauncher bnds=[168,1154][296,1282]} from pid 5206
D/alsa_ucm(  195): Setting mixer control: RX3 MIX1 INP2, value: RX6
D/alsa_ucm(  195): Setting mixer control: RX4 DSM MUX, value: DSM_INV
D/alsa_ucm(  195): Setting mixer control: RX3 Digital Volume, value: 68
D/alsa_ucm(  195): Setting mixer control: RX4 Digital Volume, value: 68
D/alsa_ucm(  195): Setting mixer control: LINEOUT1 Volume, value: 66
D/alsa_ucm(  195): Setting mixer control: LINEOUT3 Volume, value: 66
D/alsa_ucm(  195): Setting mixer control: SLIM TX3 MUX, value: RMIX3
D/alsa_ucm(  195): Setting mixer control: SLIM TX5 MUX, value: RMIX5
D/alsa_ucm(  195): Set mixer controls for HiFi enable 1
D/alsa_ucm(  195): Setting mixer control: SLIMBUS_0_RX Audio Mixer MultiMedia1, value: 1
D/ALSADevice(  195): close: handle 0xb7f74e48 h 0x0
D/ALSADevice(  195): open: handle 0xb7f74e48, format 0x2
D/ALSADevice(  195): Device value returned is hw:0,0
D/ALSADevice(  195): handle->format: 0x2
D/ALSADevice(  195): setHardwareParams: reqBuffSize 2048 channels 2 sampleRate 48000
D/ALSADevice(  195): setHardwareParams: buffer_size 16384, period_size 2048, period_cnt 8
V/StateManager( 8049): startState class com.android.gallery3d.app.FilmstripPage
D/AwesomePlayer(  195): Before reset_l
D/AwesomePlayer(  195): printFileName fd(42) -> /system/app/GalleryGoogle.apk
V/CameraHolder( 8049): open camera 0
E/QualcommCamera(  195): Qint android::get_camera_info(int, camera_info*): E
E/QualcommCamera(  195): Qint android::get_camera_info(int, camera_info*): E
I/AwesomePlayer(  195): setDataSource_l(URL suppressed)
D/AwesomePlayer(  195): Tunnel Mime Type: audio/vorbis, object alive = 0, mTunnelAliveAP = 0
D/AwesomePlayer(  195): maxPossible tunnels = 1
D/AwesomePlayer(  195): Normal Audio Playback
W/AwesomePlayer(  195): Trying to create tunnel player mIsTunnelAudio 0,                        LPAPlayer::mObjectsAlive 0,                        TunnelPlayer::mTunnelObjectsAlive = 0,                        (mAudioPlayer == NULL) 1
I/OMXNodeInstance(  195): OMX_FreeBuffer for buffer header 0xb7fd8798 successful
I/OMXNodeInstance(  195): OMX_FreeBuffer for buffer header 0xb7fcc288 successful
I/OMXNodeInstance(  195): OMX_FreeBuffer for buffer header 0xb7fcc3c8 successful
I/OMXNodeInstance(  195): OMX_FreeBuffer for buffer header 0xb7fcc4f0 successful
D/CameraStorage( 8049): External storage state=mounted
D/AwesomePlayer(  195): Tunnel Mime Type: audio/vorbis, object alive = 0, mTunnelAliveAP = 0
D/AwesomePlayer(  195): maxPossible tunnels = 1
D/AwesomePlayer(  195): Normal Audio Playback
I/AwesomePlayer(  195): setDataSource_l(URL suppressed)
I/OMXNodeInstance(  195): OMX_FreeBuffer for buffer header 0xb7fd8628 successful
I/OMXNodeInstance(  195): OMX_FreeBuffer for buffer header 0xb7fed7f8 successful
I/OMXNodeInstance(  195): OMX_FreeBuffer for buffer header 0xb7fed728 successful
 
a restart or killing mm-qcamera-daemon will solve this.
It's already known I wrote it in my post about the release
With adb shell killall mm-qcamera-daemon doesn't change anything

Inviato dal mio MI 2s utilizzando Tapatalk
 
adb shell su -c 'killall mm-qcamera-daemon' :)
If it doesn't work restart ur phone.
It tell me Unknown id: mm-qcamera-daemon even if I do as adb root... Restarting phone this is fixed... Hope for a fix soon ;)

Inviato dal mio MI 2s utilizzando Tapatalk
 
Is it just me or is the proximity sensor in-call inconsistent.Sometimes it works perfectly ,but others it juts turns off the screen in the first 10 secs in a call or it just does't react at all until you trigger it a couple of times.
 
One question from me, I installed your rom yesterday with a full wipe but after the first reboot wifi stopped working. It stays on turning on wifi but nothing happens after that. Fiddling with airplane mode, rebooting with and without the battery in the device and trying to turn it on and off in terminal didn't help. (svc wifi enable/disable) That command only works to turn it back off when I reboot after turning it off with that command. I use a 32GB MI2. Any ideas? I also have the same camera problem as linuxx has so I will try the fix you stated above.

Sent from my MI 2 using Tapatalk
 
@M1cha can you release a hot-fix for wifi, saw your twitter :p I go nuts on the toogle...

Skickat från min MI 2 med Tapatalk
 
WiFi cannot turn on can be fixed by turning on / off airplane mode. Camera not connected can be fixed by reboot.

Sent from my MI 2 using Tapatalk
 
@M1cha : ah ok...then I and the others will wait until the audio fix, actually I can't make or receive any calls so still useless for me :/
 
OK @M1cha found 2 bugs ( XP )
1- on the second reboot WiFi Broke forever...
2- if i turn om torch by pressing home button on lockscreen (enabled in settings) torchio won't turn off any way :(
Camera works for all the day without problems after the reboot

Inviato dal mio Nexus 7 utilizzando Tapatalk
 
WiFi cannot turn on can be fixed by turning on / off airplane mode. Camera not connected can be fixed by reboot.

Sent from my MI 2 using Tapatalk
I do that like ten times wifi is stuck..

Skickat från min MI 2 med Tapatalk
 
Thank you for the fix, I did have to do a full wipe and restore my apps but for now it is working properly. Flashing the patch without wiping didn't work , wiping cache and dalvik alongside with it didn't help either. But thanks!

Sent from my MI 2 using Tapatalk
 
Thank you for the fix, I did have to do a full wipe and restore my apps but for now it is working properly. Flashing the patch without wiping didn't work , wiping cache and dalvik alongside with it didn't help either. But thanks!

Sent from my MI 2 using Tapatalk
That makes no sense because this fix just replaces the kernel and one binary but great it works for u.
 

Similar threads